Question about Sharp Projection Televisions

1 Answer

Sharp model LC-20B6U-S now has no sound or picture. While watching TV yesterday everthing went out. Screem appears to come on but no picture or sound.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 203 Answers

By this description it sounds like you have backlight to the picture which means the power supply in the set is working and the inverter board which powers the screen is working. Your problem may be on the main board if this is the case. I have repaired this set for the same symptom with two different problems. First it could be on the inverter board, and second it could be on the main pcb. Once on this model a piece of metal heatsink slid down due to operating temp. of set and touched bottom of main pcb causing a failure of the sound and picture. Either way, if you have no on-screen-display you will be replacing a circuit board. If you whine loud enough to the mfg. co. they may help you. But good luck.

Posted on Jun 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture, no sound


sounds like the main board maybe going out or is gone and the lamp may have went as well

Jul 20, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Lcd sharp tv model lc-26af3m it power on and after 10 to 12 hour it disply the picture and if we power off than again to takes same time to display the picture .pls help me on this problem .thanks.


I have solved a few of the sharp LCD tv problems. I might be able to help you with tht problem. If u from Maldives, U can reach me at Rifaa@hotmail.com

Oct 11, 2008 | Sharp Projection Televisions

1 Answer

I have a sharp tv model #LC-46SB54U and a small Analog box keep appearing in the right upper corner while watching tv. How do I stop that box from appearing?


Good Day, 49erfan;
As a Texan's and Lion's FAN I'm not sure if I should give you any advice. First of all GO 9er's!!!! I love you too. Try this since I don't know what "box" you may have. See if "box" remote has a "display" button on it. If so, press. Also, try resetting BOX by unplugging for 2 to 5 minutes. IF NO FIX call service provider, TV is not the problem. Good Luck, big IRISH.

Sep 01, 2008 | Projection Televisions

2 Answers

I have a 32 inch sharp tv and it has been working fine, but i just went to watch a dvd and got sound from the dvd but a green, disjointed pattern instead of pictures. i switched dvds and it was the same...


there is a possibility that you have switched the RCA cables for the right port, the color patterns happen if your plug the component RCA ( Y Pb Pr) on a diff port. their usually color coded so please double check that to.

e733778.jpg if not, please let us know what is the model number of the TV and we will find what can be done in the TV.

Aug 10, 2008 | Projection Televisions

1 Answer

Sharp Aquos LC-20B6U-S TV NOW HAS NO SOUND OR PICTURE. IT APPEARS TO COME ON BUT WITH NO PICTURE OR SOUND.


This can be caused by many different things. Check power supply fuses. If ok suspect inverter board which drives screen. Check for bulging capacitors and open transformers or just find replacement cost using numbers on board. That may fixya.

May 29, 2008 | Sharp Projection Televisions

1 Answer

20" sharp lcd, no sound


Gud day..you check first ur cable then ur speakers.. even the connectors and jacks...

Mar 08, 2008 | Projection Televisions

1 Answer

Lost picture on LCD TV


Hi.

Your problem is very lightly to be A faulty invertor pcb.
Relatively easy to replace but you may find it difficult to purchase.

The invertor pcb basically makes high voltage to strike up the tube lights behind the screen.

What make & model is your tv set & what country are you in.

http://dysonmanuals.llc.nu/

Chris..

Dec 30, 2007 | Projection Televisions

1 Answer

NO POWER TO TV


This sounds like a bad convergence board.
You didn't mention the model but I bet its a samsung rear projection HDTV.
If the convergence board fails, you can diagnose by pulling the power leads to the 3 convergence circuits, then power on the tv, if it lights (picture will have very bad convergence) then that is most likely the cause.
You can usually buy a new convergence board for about $80-$100. Look on eBay by the make and model of the TV.
And its real easy to replace.

Nov 26, 2007 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sharp Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...