Question about Office Equipment & Supplies

1 Answer

Does anybody know what is an SC542 error in a Sarvin 9927 DP HEEEEEEEEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLLLP

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,110 Answers

Fuser warm up failure. This means that the fusing unit did not heat up properly or if it did the the thermistors which monitor the tempurature did not tell the machine it was warming up. Try to reset by pressing the Clear/Modes key, then 1, 0, 7, then press and hold the Clear/Stop key for a few seconds. When you get the sp mode screen just turn off then back on the main power switch.
If the code comes back you are going to need a service tech out to diagnose what part is defective. Most common are the thermistors.
Good Luck and Thank You for using Fixya.
We are having a contest this month based on customer testimonials. If I have helped you with your free question today please take a moment to leave a testimonial.
Thanks!

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is error code SC542 for ricoh aficio 9005?


Ricoh Aficio MP2510, 3010 Error code sc542 on Lanier ...

? 6:08
https://www.youtube.com/watch?v=58MQVyjfDyg
Sep 3, 2013 - Uploaded by Used .Copier
Are you getting Error Code sc542 on your Ricoh, Lanier,Savin or Gestetner copiers? ... Ricoh Aficio 1022 ...

How to reset Ricoh Error Code sc542 sc546 sc548 problem ...

? 2:41
https://www.youtube.com/watch?v=3CnGl1Ytp34
Sep 21, 2015 - Uploaded by Copier Liquidation Center
How to reset Ricoh Error Code sc542 sc546 sc548 problem ...Ricoh Aficio copiers : AFICIO 1013 F

Dec 02, 2015 | Ricoh Aficio Office Equipment & Supplies

1 Answer

My printer start showing error sc542 what to do?


SC542 is a heating roller warm up error. Most likely the fuser lamp has failed - a faulty sensor or board is also possible but not very likely. You'll need a new fuser, I suspect.

Jun 10, 2014 | Ricoh Aficio AP3800C Laser Printer

1 Answer

Code sc542


check the fusing unit, check thermistor,thermostat heater lamp if busted.

Jan 13, 2014 | Ricoh Aficio Mp5000 Lanier Ld050

2 Answers

What is error code sc542


I found some information on this error at http://www.fortc.com/2007/06/17/ricoh-cl4000dn-error-code-sc542/

According to this website, the error code is due to a fuser temperature problem.

The Fix
In order to clear error SC542 follow these steps:

- Press and hold online + escape, then power on.
- Use up and down arrow keys to select SP2
- Press Enter
- Use up and down arror to locate SP5
- Press Enter
- Use up and down arrow keys to select 810
- Press Enter
- Confirm the selection
- Power off and on.
Kindly rate this solution, thanks!

Mar 08, 2011 | Ricoh Aficio 3025 All-In-One Laser Printer

1 Answer

My copier is a savin model# 8025e B@W and is getting an error code sc542 does anybody have a fix for this


It's a problem with the fusing unit that melts toner onto the paper. You'll need to have a service tech fix something like this.

Feb 03, 2011 | Ricoh Office Equipment & Supplies

1 Answer

Errore sc542


Hi,

Error SC542 indicates a fuser temperature problem.

you must perform procedure 5810.
  • Press and hold online + escape, then power on.
  • Use up and down arrow keys to select SP2
  • Press Enter
  • Use up and down arror to locate SP5
  • Press Enter
  • Use up and down arrow keys to select 810
  • Press Enter
  • Confirm the selection
  • Power off and on.
The error code is now cleared.

Good Luck!

May 07, 2010 | Ricoh Aficio 1085 Laser Printer

1 Answer

Ricoh 2090 SC542 error


model 2090 richo sc 542 thermistar and hetar mail cancektar parobelam

Aug 22, 2009 | Office Equipment & Supplies

1 Answer

Error E01-22 - Check Printer on my DP-2500


"E1-22" 5th & 6th mirror assy. sensor problemMirrors are out of position, was someone cleaning the mirrors or touched for it for a reason??? if not the sensors are bad

Aug 28, 2008 | Panasonic Workio DP-2500E Copier

3 Answers

Ricoh 1515 MF shows error code sc542


Um.. I don't see an "online" or "escape" button anywhere on the printer...

Mar 07, 2008 | Ricoh Aficio 1515MF All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...