Question about Furuno NavNet vx2 1920C GPS Receiver

1 Answer

Good day, I just bought a transducer (R209) for my 1920 C furuno display but seem to have a probleem with the setup on the display. I have no radar connected to the system and to do the installation I need to start at the radar screen and afterwards to system setup - network sounder setup. Can someone help to reach the correct page/display without having a radar. I look forward to you reply. regards charles

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

If you just have the transducer and no network sounder youre pretty much dead in the water. along with your transducer, you will need either a BBFF1 or DFF1 sounder. Since they operate on a network they will have to be configured depending on your setup.

Posted on Jan 07, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Furuno radar


Your antenna seems to be mis alighned. Its ZERO point must be readjusted.

Aug 30, 2008 | Furuno Navnet 1834C/NT vx2 Radar C Map Nt

1 Answer

Which version furuno echo sounder will work with the LS8000 in-hull transducer. I need to upgrade but the transducer is built into the hull, would be easier just to keep it


I think for this one your best bet would to be to call Furuno tech. directly. They'll be more than happy to upgrade your instrument.

There are two numbers:
Camas, WA 360-834-9300
Denton, MD 410-479-4420

Hope this is helpful.

Oct 06, 2014 | Boating

1 Answer

I have a furuno FCV295 and when I was doing the initial installation set up of the transducer (airmar r299) I accidently chose the wrong settings. How do I re-do the transducer settings? The factory reset...


If you reset it and while in the Initial Settings" Menu, you press menu, it should take you to the transducer setup screen. These menus allow for "Transducer Type" to be changed to your exact transducer. See the "Installation Manual", which is different than the "Operators Manual". Section 3 page 9 and 10. You may have to enter your units of measure (Knots vs MPH, etc), and then it will allow you to choose the transducer type. Hope this helps. John Barry, 847-746-0100, technicalmarine.com.

Jun 19, 2011 | Furuno FCV 295 104" Fish Finder

1 Answer

Does this transducer mount in the floor of the boat,or on the bottom of the hull?


Hi!

This transducer requires a hole to be drilled in the bottom of the hull and the unit installed from the outside, using a caulk/adhesive such as 3M 4200 or 5200. Nice choice. Furuno is a good manufacturer!

Hope this helps!

Dec 24, 2010 | Furuno 520 5psd Plastic Thru Hull...

1 Answer

Data cards for Fununo 1850w


Furuno just stopped producing these models about a year ago. They use a special chart card. You can still purchase the cards from Navionics or C-map if you need to. I will tell you from experience that you should get your internal battery changed out if you havent done so already to keep from losing your settings and waypoints. The dealer will have to save them for you though and put them back on. Furuno made a GP7000 to replace this one and it's uses SDcards and is nothing like the rest of Furuno's product line. The best replacement for this unit is the Garmin GPSMAP 700 series. You can use your old furuno transducer if you have one (with an adapter plug). This garmin unit also has a built in GPS or you can use an external one. The 700 series will be shipped in April. Check out Garmin's website or mid-shore electronics.

Aug 29, 2009 | Furuno 1850w/Nt Gps Chartplotter C Map Nt...

1 Answer

My problem is I bought a 600l furuno and it came w/a thru-hull transducer and I wanted a transom mounted trans.I all ready bought a tr/mount and I need to sell the thru/hull.It's the 2" w/speed and temp...


i will exchange this for you, free shipping no charge, just ship it to me to inspect and i will send you the transom ducer no charge, if you have a bronze thru hull with speed and temp to trade for a plastic transom mount with speed and temp, let me know

Jul 29, 2009 | Furuno 520 5psd Plastic Thru Hull...

1 Answer

LLOKING TO BUY A REPLACEMNET TRANSDUCER FOR A FURUNO FCV-582L


Yes, the current model of this is the FCV 585 and it is great. The transducer will need to be changed.

Apr 07, 2009 | Furuno FCV-582L GPS Receiver

1 Answer

I have a furuno fcv 585 echo sounder with a FURUNO CA50/200-12M -c13298 BRONZE THRU HULL HIGH PERFORMANCE TRANSDUCER. The transducer has 4 wires and it looks from the schematic that it attaches via a...


you need an MB1100 matching box has the 10 pin pigtail for your sounder and accepts bare wire input from your ducer
this will also ensure that all power from sonar get to ducer, but it from me if you like 847-746-0100

Jul 09, 2008 | Furuno FCV-582L GPS Receiver

1 Answer

Installation furuno GP7000F/NT


This unit has built in sonar, so no DFF1 is required. The 1KW transom mount is in stock here, with the proper Furuno 10 pin connector. That is all you need, the display, the power cord, the GPS antenna, the transducer and THE BOOK! We are a Furuno dealer in the Great Lakes

Mar 03, 2008 | Furuno GP7000F/NT GPS Receiver

Not finding what you are looking for?
Furuno NavNet  vx2 1920C GPS Receiver Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Furuno GPS Experts

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Steve
Steve

Level 3 Expert

693 Answers

Are you a Furuno GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...