Question about Televison & Video

1 Answer

I have a Hitachi 43fdx01b and I have just replaced the two convergence chips because of a "Red" convergence issue. I learned the hard way about the desoldering and resoldering, but got it done. Now i have a "BLUE" convergence issue and can't get it to adjust.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Did you check the resistors by the convergence chips? check to see if they are open. the resistors are usually lined up on the other side of the heatsink as the convergence chips.

RK42 2.2 ohm 1 Watt
RK46 1.5 ohm 1 Watt
RK50 2.2 ohm 1 Watt
RK54 1.5 ohm 1 Watt
RK58 3.3 ohm 1 Watt
RK62 1.8 ohm 1 Watt

the convergence chips to be used are
IK04 STK394-160E Part #: CZ01341
IK05 STK394-160E Part #: CZ01341

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just replaced six resistors and heat sinks on my Hitachi 43fdx01b


2.2 is red,red and 1.5 brown, green---no polarity.

if you did not change the chips or poor soldering,,,,,,,,

Jun 26, 2012 | Hitachi 43FDX01B TV

1 Answer

There are green and red waves on the top and bottom of my screen and the shapes in the picture are distorted. This is on a Hitachi 43FDX01B


Ur convergence it dead.U know how to solders?Buy a convergence kit at Tv repair World.com,Tvrepairkits.com.Replaced 2 convergence ICS,and all it resistors.Shop will cost u $300 for parts and labors.

Jan 27, 2010 | Hitachi 43FDX01B TV

1 Answer

Red and green waves...double vision ...how old...how valueble...hitachi 43FDX01B


Try adjusting the convergence. If it won't move see below- (or hitting Magic Focus for some Hitachi’s)

This sounds like convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually $200-$400 Be sure to vote/rate me if this helped Thanks!
See link for more detail
http://www.ehow.com/how_4575598_yourself-projection-tv-repair-convergence.html

Nov 05, 2009 | Hitachi 43FDX01B TV

1 Answer

Convergence chips replaced, tv powers on and no picture


You have to replace the chip with the same kind, or at least crossed referenced, but still exactly the same but diffrent manufacturer.

Aug 15, 2009 | Hitachi 43FDX01B TV

2 Answers

Convergence on Hitachi 43fdx01B not working


ik04,ik05:stk392-110(replaced with:stk392-150)resistors:rk46,54:1,5ohm.,rk42,50:2,2ohm.,rk58:3,3ohm.,rk62:1,8ohm..try make order in "MCMelectronics".,partstore.,bdent.

Jul 09, 2009 | Hitachi 43FDX01B TV

1 Answer

Hitachi 43FDX01B convergence red line wont move


probably need to replace STK IC on convergence board and possibly associated low value resistor

May 09, 2008 | Hitachi 43FDX01B TV

1 Answer

Hitachi 43FDX01B (convergence) problem


hi i have same prob iv bin told its a convergence chip an thay r £150 ! thay go bout evry 6 years an its comon .. any way there coming 2 fix mine 2day so ill let u know if it sorts it out my mail is mjoutlaw@hotmail.co.uk thanx

Jan 30, 2008 | Hitachi 51F500 51" Rear Projection...

1 Answer

Hitachi 43FDX01B (convergence) problem


Convergence IC's must be changed to start repair..original...
STK392-110 sub to Hitachi upgrade STK394-160E.....PART #
CZ 01341...you need two....
Next, take a critical look at the B+ feed resistors near the IC's..
check for over-heat / damage......usually 2.2 ohm 2 watt......
Let me know....................T.

Jan 03, 2008 | Hitachi 43FDX01B TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...