Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

When you push the start button it beeps but nothing happens. F&P pride is model

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

HI Richard sounds like your LID SWITCH is faulty.Turn the machine off at the wall and remove the 2 screws at the back of the top panel.Now gently lift the panel and rest it on the lid.It still has the display module wires attached.Now look to the right hand side of the computer and you will see a blue and black pair of wires leading under the hob and connected with another pair of wires that go under the computer.The blue and black wires are your lid switch wires.When the lid is closed they should have conductivity between them.Have you got or can borrow a multimeter to test the reed switch?If you have conductivity between the 2 wires then the machine will work when you push the start button but if the 2 wires do not have conductivity between them then the machine will only beep.Does the machine do nothing even on the spin cycle?Please reply on additional information and how you would like to proceed.Looking forward to your reply.

Posted on Oct 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

We just changed batteries. When we put the key in, there are 5 beeps and nothing will move.We have pushed the brake lever on the back forward and still nothing.

Hi I have no data on the go go ...if the circuitry is similar to pride x the 5 beeps mean the manual lever is in freewheel u have to remove key put freewheel lever in drive & replace key good luck

Jan 20, 2016 | Pride GoGo Elite Traveller 12amp Mobility...

1 Answer

The only lever is the 1 in the back then is in the back position, keeps scooter still. Pushed reset button, nothing happens. It still beeps 5 times, it is a pride go go ultra x 3 wheel, please help

Hi, 5 bleeps implies the issue is related to the brake, check the little micro-switch situated on the side of the brake unit , this can stick fooling the scooter into thinking it still in freewheel mode...

if the rear disconnects away from the frame , check the connection here as well.


Jan 19, 2015 | Pride Health & Beauty

1 Answer

Pride jazzy 600 power wheelchair controller lights flash

make sure the motors are not disengaged, turn off chair, can you move it by pushing it? if so lock the wheels and try again. next is the controller in lockout. press and hold the on button till it beeps push joystick forward til it beeps pull it back til it beeps turn off try again. you can call 1-800-800-8586 for tech support

Sep 28, 2012 | Pride Mobility Products Pride Jazzy 600

1 Answer

Pushed a button but dryer does not start, can not push any other

There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning

Dryer2_bing.gif Repair ? The dryer will not start


May 12, 2010 | Kenmore Elite HE4 Electric Dryer

2 Answers

When i push the power key it beeps and two lights appear then it shuts off its been a while since ive charged it & im almost sure as i have a disability scooter when its not in use use a decent trickle charger they can be left plugged in for up to 3 months,so your batteries are fully charged all the time & plug back in even if you do a 100 yards trip,lets be honest the batteries are not cheap,so get the most out of them.or if not in use for any period after they are fully charged disconnect them.

May 11, 2010 | Pride Jazzy 1113 ATS Indoor Power...

2 Answers

Push start and motor hums, but nothing else works.

Hi, If you release the start button, does the hum stop? It sounds like hte start winding in the motor is bad. You can try and start it manualy by truning the timer on, open the door so that you can turn the drum with your hand. You will need anoth person there so that one of you can hold the door switch button in and the other push the start button. While pushing the start button, try turning the tub and see if it starts. This will give you an idea on the motor bad or not.
I hope this helps. Please let me know if you need any more assistance.


May 12, 2009 | Dryers

2 Answers

Coffee maker beeping

Is your grinder in and the lid down? My coffee maker (grind & brew) started beeping after I cleaned it and turned the left knob clockwise with the grinder still disassembled. There's a little button that is depressed when you close the lid with the grinder in there (I'd guess it's a safety feature). I pressed down that button, and the beeping went away.

Jan 20, 2008 | Cuisinart Grind and Brew 10 Cup Coffee...

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides