Question about eMachines T6524 PC Desktop

2 Answers

When I turn my computer on it displays a message stating that windows couldn't start successfully and to choose how I want it to start. Then restarts in 30 seconds and it does this process over and over.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Try this turn off the PC with the power button. Then power it on start tapping the F8 key repeatedly while the PC is powering on this should bring up a screen with a bunch of start options like this
When I turn my computer - 6a0c860.jpg
Choose the Last Know Good Configuration from the list.
This may fix the problem, not a for sure thing. Sometimes works sometimes doesn't. This is only one option to try.

Please rate, and write testimonial if you feel the need to, if this was helpful.
Good Luck
cookieMonster

Posted on Oct 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,571 Answers

Then try booting into safe mode (F8)
You will get various options depending on your installation.
You may get a recovery / restore option.
If you can boot into safe mode, try a system restore.
The recovery mode may reset the pc to factory default, you would loose everthing

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows installer error


DID YOU GET THE RESTORE CD WITH THE HP SYSTEM IF YES THEN PUT THE CD IN START YOUR COMPUTER CHOOSE BOOT FROM DVD AND THATS IT IT WILL RESTORE IT OR ELSE U TRY PRESS FUNCTION 8 LIKE F8 AND CHOOSE LAST KNOWN GOOD CONFIGURATION. IF DOSENT HELP U HAVE TO GET THE GENUINE wINDOWS DVD AND INSTALL YOUR WINDOWS AGAIN

Mar 03, 2010 | HP Pavilion A6400f Desktop PC, Refurbished

1 Answer

Hello I wonder if you can help. When we switch


Had a similar problem like this several times. Try choosing safe mode. Safe mode will load the required drivers. After safe mode finishes the loading process, restart your computer and choose to start windows normally. The problem you mention usually happens when the computer is turned off without using normal shut down procedures. Also happens when you have a sudden power outage.

Oct 24, 2009 | Computers & Internet

1 Answer

Dell Inspiron blank screen


You can restore your system in your safe mode.
To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.

Jun 11, 2009 | Dell Inspiron 9300 Notebook

1 Answer

When i turn on my pc, it showing one message every time"script file windows/system32/virus cleaner vbe. is missing.


Hi,
To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in theOn this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Completepage is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.

Thanks, PREM

Mar 31, 2009 | Microsoft Windows XP Professional

1 Answer

Will not display output from Computer


Probably the video resolution or the monitor Refresh Rate (eg: 50/60/75 Hertz) is set too high in the operating system, which over-drives the monitor electronics and it is unable to display anything.

If you restart the computer manually (hold in the power button for 5 seconds, the computer will shut off, turn it back on again) you will see the normal BIOS and Windows startup display on the monitor, but then as Windows completes it's startup it returns to the error message you see.

To fix this, restart the computer manually and start the computer in Safe Mode. To do this press F8 just before the computer starts to load Windows, and choose Safe Mode. Once in Safe Mode, you should see the monitor working correctly.

Now restart the computer in Normal Mode and everything should be fine.

Dec 23, 2008 | Westinghouse LCM-19v1 Monitor

1 Answer

Booting problem


If the computer was working properly few hours/days back... then you can try it by restoring the windows to an earlier time by booting it in the safe mode.


How to go in the safe mode < click



How to restore the system>

To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.

If the restore process completed successfully but the computer is still not performing as you want then its recommended to repair the windows.


Dec 04, 2008 | Dell OptiPlex GX260 PC Desktop

1 Answer

Strange problem about WBR 1310


Step 1: Start the System Configuration Utility
Click Start, click Run, type msconfig, and then click OK.

The System Configuration Utility dialog box appears.

Step 2: Configure selective startup options
1. In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.

2. Click to clear the Process SYSTEM.INI File check box.

3. Click to clear the Process WIN.INI File check box.

4. Click to clear the Load Startup Items check box.

5. Click the Services tab.

6. Click to select the Hide All Microsoft Services check box.

7. Click Disable All, then got to Startup click Disable All and then Apply and then click OK..

8. When you are prompted, click Restart to restart the computer.


Step 3: Log on to Windows
1. Log on to Windows.

2. When you receive the following message, click to select the Don't show this message or launch the System Configuration Utility when Windows start check box, and then click OK:

You have used the System Configuration Utility to make changes to the way Windows starts.

The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the System Configuration Utility.


Step 4: Optional step to disable features
This step temporarily disables Microsoft features such as Plug and Play, networking, event logging, and error reporting. Also, this step permanently removes the restore points from the computer. The System Restore feature uses restore points to restore your computer to an earlier state. If you remove the restore points, you can no longer restore Windows to an earlier state.

1. Click Start, click Run, type msconfig, and then click OK.

The System Configuration Utility dialog box appears.

2. Click the General tab, click to clear the Load System Services check box, and then click OK.

3. When you are prompted, click Restart to restart the computer.

Aug 11, 2008 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Can't get pass the background screen when pc load


The sequence is:
a) The Dell bios splash screen is displayed,
b) the screen will go black,
c) the disk activity light will flash for about 5 - 7 seconds, then will remain off.
d) you force a power off,
e) wait a few seconds,
f) then turn the machine back on.
g) The bios splash screen is displayed,
h) then a black screen with white text is displayed, reporting that Windows was not shut down nicely and would I like to boot into safe mode or safe mode with networking, or others.
g1) If you choose Safe Mode, Windows will boot up successfully. If I restart, the computer will usually (probably) boot into Windows fine.
g2) If you choose Boot Normally, the computer will usually (probably) enter the black and hung state.
see if that helps and the if possible do a do a system restore to when the system was working correctly.

Aug 03, 2008 | Dell Dimension 2400 PC Desktop

1 Answer

Uninstall Problem


If you are installing the software using Windows and the software was not successfully installed or the uninstaller could not be found, run the Scrubber Utility to perform a clean driver uninstallation Use the Scrubber Utility Use the following steps to run the Scrubber Utility.
  1. Disconnect the printer from the computer.
  2. Restart the computer.
  3. Insert the Starter CD into the CD drive. If the CD menu displays, close the CD menu.
  4. Locate the Utils\Scrubber folder on the Starter CD.
    • For Windows 98 and Windows Me, use the scrub9x.exe file located in the Utils\Scrubber\Win9x_Me folder.
    • For Windows 2000 and later, use the scrub2k.exe file located in the Utils\Scrubber\Win2k_XP folder.
  5. Double-click the file to run the Scrubber Utility.
  6. The following message will display: This utility will attempt to remove all HP DeskJet 460 Series devices from your system. It is recommended that you disconnect the device and restart before continuing. Do you want to continue without rebooting?
  7. Click Yes . A message stating Successfully removed the devices(s)! This system is ready for installation displays after the scrubber utility finishes running.
  8. Click OK .
  9. Restart your computer, and then reinstall the printer software

Apr 27, 2008 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

Windows XP fails to load and Computer will not start up.


Boot from startup floppy disks or CD-ROM, choose repair option during setup, and run Recovery Console. When you are logged on, you can run FIXMBR command to fix master boot record. This should solve your problem.

Sep 20, 2007 | HP Compaq Presario V2000 Notebook

Not finding what you are looking for?
eMachines T6524  PC Desktop Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

brian soufane

Level 3 Expert

693 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Avishek Samaddar
Avishek Samaddar

Level 3 Expert

639 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...