Question about DEI Python 1400XP Remote Start/Keyless Entry System

1 Answer

Had to change the battery in my Python Keyless Start/Remote and now it wont work. How do I reprogram it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Directed Ele... Master
  • 625 Answers

To program remote:
turn ignition on
press and release programming switch once ( the siren/horn will honk once)
press and hold programming switch
while holding programming switch, press lock button on remote ( the unit will chirp/honk to confirm programming)
release programming switch
turn ignition off
test remote

Posted on Oct 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My keypad used to work, changed battery, does not work, bought new keyless pad and still wont work, remote in truck works


Need to reset/re-program it as specified in the user manual. When the keypad loses power during the battery change it loses the original settings and need to be reprogrammed. New keyless pad also need to be programmed to link with the receiver.

Jan 12, 2016 | Building Materials

1 Answer

Engine wont shut off after vehicle started with remote starter


Tools: 10mm torque wrench
Step 1: Find the release bonnet lever or button in the car.
Step 2: once the bonnet is open, locate the battery pack.
d51cf553-3d95-49c0-b403-95c1c48f9ba5.jpg

Step 3: Then locate the negative charge and unplug the connector to the terminal by using your torque wrench.

Step 4: Then replug it in and close Start the car up and it should work.

Hopefully it works.

Jan 18, 2014 | DEI Python 1400XP Remote Start/Keyless...

1 Answer

My fcc id:nahrled4 remote starter is not working just changed the battries


You may have lost the memory or the battery is dead(might be) or incorrectly installed. Sometimes you have to check the little contacts to for proper tension against the correct points of el trans.

Nov 06, 2013 | 1401 Remote Start/Keyless Entry System

1 Answer

The remotes for my system do not operate when I press the lock or unlock or remote start buttons. Is there a way that I can reprogram the two remotes to work with my remote start sytem. It is the python...


The "pair" the remote with your system:

1.PRESS AND HOLD the f button on the remote UNTIL the transmit LED lights solid (approximately 10 seconds)
2.PRESS AND HOLD the remote start button (circle arrow) UNTIL the LED blinks 3 times and the amber transmit LED lights up. Your remote is now ready to pair.
3.. Turn the key to the on position
4.Within 5 seconds PRESS AND RELEASE the control button on the antenna.
5. Within 5 seconds PRESS AND HOLD the control button. The status LED will flash one time and the siren will chirp to confirm that the system is ready for remote pairing.
6. Press lock button on remote. System will respond with chirp toconfirm pairing.

Oct 28, 2010 | 1401 Remote Start/Keyless Entry System

Not finding what you are looking for?
DEI Python 1400XP Remote Start/Keyless Entry System Logo

2,616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directed Electronics Vehicle Parts & Accessories Experts

Brad Brown

Level 3 Expert

17326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2217 Answers

Are you a Directed Electronics Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...