Question about Samsung SyncMaster 710N 17" LCD Monitor

3 Answers

No display Samsung SyncMaster 710N 17" LCD Monitor

When i power on my pc the monitor display "Not optimum mode: Recommended mode 128081024 60 Hz" when i presh Menu button it's display "Test is ok" Please help me

Posted by on

  • 1 more comment 
  • Anonymous Jun 15, 2008

    same exact problem!

  • smith62098 Aug 02, 2008

    I have the same problem but I have dual monitors and only one is doing it other one is perfectly fine. Any solutions?

  • Anonymous Nov 14, 2008

    I have the same problem. I hate Samsung

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Same problem here...
here is a translated version of a webpage discussing the repair for this error...

http://72.14.235.104/translate_c?hl=en&sl=es&u=http://www.dtforum.net/index.php%3Ftopic%3D55304.msg1010695085%3Btopicseen&prev=/search%3Fq%3DNT68F63LG%2B50%2Bohm%26hl%3Den%26rlz%3D1T4SUNA_enUS219US220&usg=ALkJrhiRO8V09Lo7lnjqW47LE8IE653r7w

solder a 50 ohm resistor on pins 5 & 6 of Novatek NT68F63LG chip...
good if you can DIY, best if a qualified technician do it for you..


Posted on Oct 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 146 Answers

I have the same monitor with same probelm. I dont know if this is problem with samsungs specific model but the only way to work is the follow.
1. connect your pc to another monitor and set the resolution to 1024x768.
2. set the herz to 60mhz.
3. save the settings .
4. connect your samsung monitor with your pc
You must get clear picture. I dont know why it works 1024x768 with 60hz and not at higher resolutions but this is the only way to work the samsung syncmaster 713bm

Posted on Mar 15, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 417 Answers

Same Here But Is A Faulty circuit board

Posted on Jul 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the same problem. I get a box with "not optimum mode. But what I need is a picture of the mainboard with the 50 ohm resistor between pin5 and pin6.



hello
I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.
Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by me and shows how to open monitor, how

to solve dark screen problem, how to check and replace capacitors, how to solve the problem non-optimal mode (without reprogramming MCU or
changing the main board) photo are included. 100% functional. The repair process is very simple 30-40min. (does not need a lot of
experience in electronics and expensive instruments) and is not expensive. With this manual you can solve problems by yourself and save
money.

"Not Optimum Mode 1280x1024 60Hz"
- The monitor turns on but turns off by itself, the LED blinks green.
- If you detach from the PC points to "control cable" the picture runs continuously in the vertical direction or presents while line , and
as soon as it is reconnected, the monitor goes off.
- The monitor does not turns on and dont dispaly anything, the LED blinks green-lit, if you detach from pc points to "control cable".
- The monitor turns on, works well some time, but after a window apiers "Not optimum mode. Mode recommended 1280X1024 60Hz"
- The monitor turns on, works well only with low resolution 800x600, when try to change a window that reads "Not optimum mode. Mode
recommended 1280X1024 60Hz"

the manual you can find on ebay (my ebay name is asnerejas123):
Samsung monitor repair manual guide 710n,913v,510n more
220498646211
Riparazione - repair Lcd Samsung monitor 710n,913v,510n
220498645860
Reparaturhandbuch für Samsung 710n,913v,510n und

Sep 14, 2009 | Samsung SyncMaster 710N 17 in. Flat Panel...

2 Answers

Half of the screen is black - Samsung SynchMaster 710N


hello
I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.
Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by me and shows how to open monitor, how
to solve dark screen problem, how to check and replace capacitors, how to solve the problem non-optimal mode (without reprogramming MCU or
changing the main board) photo are included. 100% functional. The repair process is very simple 30-40min. (does not need a lot of
experience in electronics and expensive instruments) and is not expensive. With this manual you can solve problems by yourself and save
money.

"Not Optimum Mode 1280x1024 60Hz"
- The monitor turns on but turns off by itself, the LED blinks green.
- If you detach from the PC points to "control cable" the picture runs continuously in the vertical direction or presents while line , and
as soon as it is reconnected, the monitor goes off.
- The monitor does not turns on and dont dispaly anything, the LED blinks green-lit, if you detach from pc points to "control cable".
- The monitor turns on, works well some time, but after a window apiers "Not optimum mode. Mode recommended 1280X1024 60Hz"
- The monitor turns on, works well only with low resolution 800x600, when try to change a window that reads "Not optimum mode. Mode
recommended 1280X1024 60Hz"

the manual you can find on ebay (my ebay name is asnerejas123):
Samsung monitor repair manual guide 710n,913v,510n more
220498646211
Riparazione - repair Lcd Samsung monitor 710n,913v,510n
220498645860
Reparaturhandbuch für Samsung 710n,913v,510n und andere
220499443698

Sep 05, 2009 | Samsung SyncMaster 710N 17" LCD Monitor

2 Answers

Samsung 713N screen goes black


OK. IN XP GO TO DEVICE MANAGER AND CLICK ON THE MONITER AND UPDATE THE DRIVERS.IF IT TELLS YOU IT CAN NOT FIND A BETTER DRIVER UNINSTALL..REBOOT AND DOWNLOAD NEW DRIVERS FROM CO. WEB SITE.RICHARDM69

Aug 31, 2009 | Samsung SyncMaster 713N 17" LCD Monitor

2 Answers

Cannot set my SAMSUNG SYNCMASTER 710V MONITOR RESOLUTION


When you can't change the screen resolution then most likely only the default VGA driver has been installed. You need to install the graphics driver of the video card that is installed in your computer.
To check which graphics driver is installed, click on Control Panel - Display - Settings - Advance - Adapter tab. If the graphics adapter is set for Standard VGA then the graphics driver was not installed.

Aug 22, 2009 | AOpen Black 17" CRT Monitor

9 Answers

Same problem not optimum mode recommended mode 1280x1024 60hz


hope this is helpfull http://www.ehow.com/how_4758816_repair-samsung-lcd-monitor.html for me it was

Jan 24, 2009 | Samsung SyncMaster 710N 17 in. Flat Panel...

2 Answers

Samsung Syncmaster 710n no display and no LED light


The power button should be on the FRONT BOTTOM RIGHT. and there should be a little led/light next to it. make sure everything is plugged in correctly and press the power button, the led should light up, and then boot your computer.

Let me know --
If this helped please mark this thread as FixYA

Dec 26, 2008 | Samsung 710N V2 (Ivory) 17 in. Flat Panel...

2 Answers

Samsung Syncmaster 710n monitor - screen goes black for no reason. All cords connected properly. Computer works with other monitors. Switch on front of computer is on - green light on. Get floating...


in safe mode adjust the resolution lower than 1280x1024
then restart and then install the driver again the driver is crrupted than install the right driver problem could be solved

May 16, 2008 | Computers & Internet

2 Answers

Samsung 710N


hi, try with another crt monitor to check if the display card is ok..if that works fine then u will have to take it to the service center.. let me know..

Jan 10, 2008 | Samsung 710N V2 17" LCD Monitor

Not finding what you are looking for?
Samsung SyncMaster 710N 17" LCD Monitor Logo

1,881 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

kakima

Level 3 Expert

102366 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...