Question about Craftsman Garden

1 Answer

Need instructions for a sears excalibur dado blade model no. 720-32708 or can i down load it and where

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have this dado blade but I don't understand how to set it. I can turn the dial but I don't understand what keeps it in the selection that I want???

Posted on Oct 08, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 127 Answers

SOURCE: I bought a craftsman dado

Dado blades are used in a variety of saw applications. Commonly tables saws. The manual for your table saw should identify if the saw is capable of using this blade-set Never used dado blades in a saw that is not intended for them as this can result in severe injury to yourself and or damge to the tool. If your are unsure if your saw can accomodate dado blade please post your make and model of saw and someone will try to help you.

Posted on Dec 30, 2010

  • 4088 Answers

SOURCE: My manual for my Craftsman

Go to: www.searspartsdirect.com and enter the model number. This will bring up drawings of all replaceable parts and should list any manual. Good luck!

Posted on Jan 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My manual for my Craftsman 6"/po - dado set has become unreadable. The Sears number on the blade appears to be (9)30714. Is there a web site I can down load a new manual? Thanks


Go to: www.searspartsdirect.com and enter the model number. This will bring up drawings of all replaceable parts and should list any manual. Good luck!

Jan 11, 2011 | Craftsman Garden

1 Answer

I bought a craftsman dado blade set but can't find the instructions and I have no idea how to use it. Is it possible to get instructions


Dado blades are used in a variety of saw applications. Commonly tables saws. The manual for your table saw should identify if the saw is capable of using this blade-set Never used dado blades in a saw that is not intended for them as this can result in severe injury to yourself and or damge to the tool. If your are unsure if your saw can accomodate dado blade please post your make and model of saw and someone will try to help you.

Dec 29, 2010 | Craftsman Garden

2 Answers

I have a craftsman table saw model 113.27870. I need a table insert for a dado blade. I looked on the sears website and it said parts for this saw are no longer available. Will a table insert for a newer...


Maybe you could try using the outline of the regular insert to cut a new insert out of a piece of polycarbonate (lexan) or ABS plastic. The clips that hold my dado insert barely hold it in place on mine, and I've seen other saws that use plastic.

Aug 02, 2010 | Craftsman 10" Table Saw

1 Answer

What kind of dado blade can I use on my craftsman 10 inch table saw model no. 137.248100/ with stand


You have a 5/8" diameter arbor. You can use any dado blade that will fit. That said here's a few things to bear in mind.

8" diameter dado stacks are pretty standard for 10" contractor table saws. A dado stack is typically about 13/16" wide at most. It makes sense that the wider your blade is, the more power it takes to cut through the wood.

If you were to use the full width capacity of your Dado stack (13/16") a 10" diameter stack would bog down. A 8" stack has a faster rotation at the cutting edge because of its smaller radius. So, you don't bog down when you're making a wider cut if you use a smaller diameter.

If your machine was really underpowered, you could go down to a 6" stack which would cut your power requirements even more, but limits the depth of cut.

If this post was helpful, please vote. Thanks.

Mar 28, 2010 | Craftsman 10" Table Saw

1 Answer

Need dado throat insert for 113


why not just make your own out of 1/4" plywood

trace out the insert but don't cut a slot

install it on the saw with the blade all the way down

turn on the saw and raise the blade to cut out the insert

Dec 11, 2009 | Hardware & Accessories

1 Answer

I need an instruction manual for my delta shopmaster 10'' bench saw model number TS200LS. I know very little about table saws and need to change the blade and would like to install a dado blade.


you might try Dewaltservicenet.com and type in your model number in the middle of the page under need manual and see if you can find it there if not let me know and I will try and find one for you.

Nov 21, 2009 | Delta Saws

1 Answer

Got a 42" snow blade and no paperwork with it.


Ok that snow blade attachment was Made for Sears/Craftsman by AGRI- FAB. Go to thier website. Email them that you bought model number xxxxxxx and there were no instructions in the box. They will either tell you how to down load the instructions or send them too you. I have had the best luck with AGRI-FAB they like happy customers.

Oct 18, 2009 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

1 Answer

I bought a Dado blade set dd208 and there are no instructions


I'm hesitant to even answer, not knowing your skill level. But understanding that you will probably have a use for an item you purchased, and use it one way or another, here's a primer...
Be careful! Never push your hand directly toward the rotating saw such that if the workpiece kicks back your momentum will carry your hand into the blade. Begin by raising the blade only a little above the table surface and run a pass with clean wood over it to get the feel of the resistance a stack of dado blades gives. Consider making a groove in two or more passes if you need to raise the blade more than 1/4" to cut it in a single pass. Use metal dado shims to adjust the precise width of cut. Tighten the stack in a balanced way, such that the carbide teeth are not in contact with one another. Stay away from wobble dado sets. Etc. Etc. Etc.
You may wish to have a look at this website, whose author has obviously given the subject considerable thought: http://www.newwoodworker.com/usngstkddados.html

Finally, be carefull. If you think a single saw blade can tear flesh, imagine what a 3/4" wide swath will do to your hand. Think about your setups. Use test pieces to get them right. Then pay attention while you run your dados. And try to avoid plunge cuts, especially on anything shorter than a couple of feet in length. When you can, use a miter jig in the slot to hold any work you have to pass cross-grain over the dado.
Be careful, feed smoothly, and hold your workpiece firmly against the fence while it passes over the blade.

Nov 29, 2008 | Saws

Not finding what you are looking for?
Garden Logo

Related Topics:

1,311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

Dean Gruber

Level 2 Expert

110 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...