Question about HP Printers & Copiers

2 Answers

I have a hp psc 1210 all in one,it is playing up with print outs, is it possible for me to replace the print head on this model Rick

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 85 Answers

Hi I also have an HP PSC 1210,

If inks are empty?
You just need tho buy either an HP 56 = 19 ml ink (C6656A), or a less expensive HP 21 black inkjet print cartridge which has a lower 10 ml ink volume!

If color is the problem you need an HP 57 = 17 ml ink or a less expensive HP 22 = 8 ml ink tri-color inkjet print cartridge.

Trouble Shooting Tips:
You can try the following before buying:

Unplug BOTH printer cables for at least 1 minute and it will reset to factory settings.

Also check the elec. contacts are not dirty... clean them with alchol and cotton wool and also clean contacts inside printer where they make contact.

Check weights if empty? they should be 30g (pop them into 2 envelopes and weigh at your local PO !

Each 1g over 30g is 1ml of unused ink! If they have JUST DRIED UP = THROUGH NON USE you can easily revive them with our Magic Inkjet Flush print head cleaning kit

Good Luck

Tinteiros (Ebay)

Posted on May 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

HP printers use cartridges that ARE the print head. On occasion, the cartridge could be defective...especially if they are the remanufactured type. Try replacing your cartridge with a new HP cartridge.

Posted on May 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp psc 1210 will print but not copy


Symtom that scan head might be faulty, remove four screws located at corners, take out flat glass unit, remove scan head, check any damages in driving mechanism, clean reading head, fix it back and check.. If no result replace scan head unit..
acsn head snap shot:
2_3_2012_4_20_29_pm.jpg

Feb 03, 2012 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

It is not printing anything, just putting blank pages through?


Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

Apr 25, 2011 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

I inserted a new ink cartridge and now I can't print


re insert it..... cleaning its head with tissue and clean the metal holes .... yellow ones

Ahmednabil6@hotmail.com

May 02, 2010 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

My hp psc 1210 all-in-one printer won't print


I am having the same problem as we speek! Solution....throwing off the deck!

Apr 08, 2009 | HP PSC 1210 All-In-One InkJet Printer

2 Answers

How to change my HP psc 1210 default to print in black (no color)


this is not possible. I contacted tech support for this, the printer/driver is designed to print in color and HP is not going to change the driver. A real shame, and actually a rip off, but nothing you can do about it.

Mar 11, 2009 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

HP PSC 1200 color problems with website prints


It strabge... Anyway u just clean your print heads and nozzles... it shuld make it fine... or just replace ur catridge...

Sep 05, 2008 | HP PSC 1210 All-In-One InkJet Printer

3 Answers

Unresponsive printer


First off, I will try an uninstallation of the printer
Then reinstall all the drivers and software for the printer.

Jan 20, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

HP PSC 1210 does not print at all


i dought dust would cause that, reboot pc and unplug printer
plug printer back in then turn computer back on, if still doesnt work try a different usb port

Jan 15, 2008 | HP PSC 1210 All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...