How do i get to the cartage - Lexmark Office Equipment & Supplies

you need to replace color cartridges with new one

we can refil toner many times but we should reset cartage, while we refiling toner to open cartage we should sides white rings middle plastick flate white plate make adownof cartage it is first methode. when we put reffiling cartage put on printer and do on at that time we push cartage right side pointo re set. look on www.brother.com

i think it is cartage fault. drum of cartage do this many time. while we reffil dust of cartage we face same problem. once atime check changining another old cartage. u came to know problem.(nepal)

first of all you can remove your color cartage 

and check this cartage to simple page 

which color is appers
after that refill the cartage from the serge 
3ml 
3 color in the cartage and every color every point you can refil 

i think it is very easy to riffal than other printer cartage.. take out cartage from printer. side of th printer we can get one onepice of plastic as apush butten . when we push this button . we can get two part of cartiage. then we can easly see white cap of cartage.. first openinig cap we throuww old dust .then clean cartage by bloing air by air blower. thanks

we use chip and fuse for samsung cartage reset when it give us cartage empty message. before geetting thish we gets tonner is low .if recently we filled samsung dust/powder/tonner in cartage we no need reseter. in my practics while i need to put fuse (reseter) i put iton cartage after resetin suddenly i putout it from cartage and use old fuse. in this way we can use or not green chips? actuly it is difficult.

my catridge not detect

if their cartridge worked and yours did not. buy a new cartridge.

Ok 

If your printer cartages are full filled and will not able to print. Please follow the following steps-

1- Uninstall the printer driver and disconnect printer from PC.
2- Download the latest Epson Stylus CX5500 Driver 6.5b Windows 2000/XP  from given web link

    http://down3.driversdown.com/Printer/CX5500_W2K_65bE.zip

3- Install the printer driver from downloaded file and connect printer as setup ask.

4- Now remove the cartages from printer and clean the connecting points & inkjet point by soft cloath.

5- While cleaning the cartage's injet points you will must see the ink on cloath. If ink does not see on cloath may be your cartages are dry. try to clean them by little force.

6- connect the cartages to printer. tyr to print.

It will help you.

could you please give us the brand name and model no.?