Question about Graphics Cards

2 Answers

Catalyst driver Which CATALYST driver should I used with my all-in-wonder 9000pro multimedia center 8.1. The one recommended by the ATI web sight don't work. My computer is a DELL and was built in 2002; it is a windows XP professional.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I reinstalled multimedia center 8.1 and installed catalyst 6.11. The only problem now is that i'm getting an error message whenever I start TV. In the error message, if  I click on "Debug", " Send error report", or "Don't send" TV will shut down; so I just put the error message to one corner of the screen and i'm able to watch TV. I would still like to be able to watch TV wihout the error message. Thanks for your concern.

Posted on Jun 04, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 45 Answers

You should always choose the newest one. There is no reason it should not work. Try updateing all your programs and drivers.

Posted on May 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Agp accelerator


If you have not already done so, download the Catalyst Control Center from ATI's website. This will include drivers and ATI's management interface, this should also give you 3D acceleration capability. If you are using a 32-bit Operating System like Vista, the driver is here" https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/9-3_vista32_win7_32_dd_ccc_wdm_enu.exe *Note from ATI: must use the ATI Catalyst 9.3 or earlier driver. This device is now considered a legacy device from ATI, so only use up to v9.3! Hope this helps.

Jun 06, 2009 | ATI RADEON X1650 Graphic Card

1 Answer

ATI Radeon 9550


To find the latest drivers for your ATI card, use this link I have provided
to find more info about driver updating and graphic card drivers.
make sure you download the right driver for your graphic card(graphic card name) and also download the right catalyst control center to take full advantage from your graphic card.
Good Luck.

May 25, 2009 | ATI RADEON 9550 Graphic Card

1 Answer

My catalyst control center wont work


Catalyst Control center the the graphics management software. If comes with ATI Graphics Cards. Reinstalling the display driver will solve the problem.

Mar 21, 2009 | XFX NVIDIA GeForce FX5200 Graphic Card

1 Answer

ATI Rage mobility graphics card update for dualview


Display Driver
http://ati.amd.com/support/drivers/xp/radeonxprevious-xp.html 13.3MB 8.12 12/10/2008 Display Driver Only tooltip.gif try this you might need new update to receive dual view
Resolved Issues for the Windows XP Operating System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows XP. These include:
• Using an HDMI cable to connect an ATI All-in-Wonder to a Yamaha receiver
may result in the display resolution being limited to 1280x1024 and audio
failing to function
• Catalyst Control Center, some of the 3D settings are not displayed on ATI
Radeon HD 4870 adapters
• The operating system may fail to start after installing the display driver with
some configurations of "Crosfire" with Radeon X1900 Series devices
• The operating system may intermittently fail when exiting Test Drive Unlimited
after extensive game play
• Dual display, playing multiple video files on each monitor may cause the system
to stop responding
• City of Villains: Attempting to launch the game on a system running Windows
XP and containing either two ATI Radeon HD 38x0 or 46x0 products
may result in the game failing to load and the operating system failing to
respond
• Some OpenGL applications may cause the OS to stop responding on some
ATI Radeon HD 45xx adapters
• On some configurations, the display driver may stop responding when resolution
is set to 2048x1536 with 8X Anti-Alias and Edge Detect filter enabled
• Exiting some games may intermittently cause the following error message
when 8X anti-alias edge detection is enabled: "Display Driver stopped working"
• Hot unplugging a HDMI connection during video playback may cause system
instability
• Catalyst Control Center: Enabling pulldown setting may not work on all video
formats
• Systems configured with Overlay Theater Mode enabled may intermittently
become unresponsive after playing video
• Catalyst Control Center, setting the de-noise slider does not affect the quality
of progressive video content
• Intermittent flickering may be noticed on the TV out display when playing a
DVD using Cyberlink PowerDVD

Jan 22, 2009 | ATI RADEON HD 2400 PRO Graphic Card

1 Answer

NO TV on All in wonder 2006 agp


Recently had a similar problem and solved it today!

The fix starts by first doing a "deep uninstall" of all ati drivers and programs present in the affected computer computer, remember to remove al ati related programs from control panel's add remove utility, including the whole multimedia center. And finally reinstalling the new drivers (observing WDM drivers).

You should have downloaded the most recent catalyst drivers from ati, and the most recent multimedia center completely (about 80+Mb) that are available for your card.

Also visit the previous versions of the catalyst drivers, the all-in-wonder 2006 seems to be only compatible with the WDM drivers up to ver.8.4 and download it "alone" (don't worry if the latest drivers include the WDM, you can write v.8.4 over it any time).

Now proceed with the "deep uninstall" following this directions, taken from somewhere on the internet, thanks to the one who wrote them...

1. Go into the Control Panel and under the ADD/REMOVE SOFTWARE icon uninstall the ATI Multimedia software and/or the ATI DVD software.
2. Uninstall the ATI drivers also found in the Add/Remove section. Once removed, it will prompt you to reboot....do so.
3. When returning to windows, the NEW HARDWARE FOUND wizard will come up and will tell you that it has found a new VGA card and will prompt you for drivers. Hit CANCEL!
4. Now, go to START - SEARCH - FOR FILES OR FOLDERS and do a search for all files and folders using the filename ati*.*
This search will normally give you 3 to 4 files found in your c:/windows directory and subdirectories (including the Windows/System directory). Select these files and erase them. Now go to your Recycle Bin and Empty your bin.

5. Next...time to go to your Registry. Go to START -- RUN -- regedit
Here go to key HKEY_LOCAL_MACHINE -- SYSTEM -- ControlSet001 -- Control -- Video . Here there should be 4 entries. 3 of them are default Windows XP entries and the 4th one is put in by the ATI drivers. Expand each one by one until you see ATI entries. Once found, erase the entire key.
Now repeat the same step above for the ControlSet002 key and the CurrentControlSet Key. Normally, whenever you erase a key in the ControlSet001, XP automatically deletes it in the CurrentControlSet section too. So if the ATI key is not found in the CurrentControlSet section, don't worry about it.
Once all keys are deleted, proceed to the next step.

6. While still in the registry, go to the key HKEY_LOCAL_MACHINE -- SOFTWARE section. Here you should find an ATI Technologies key. Select it and delete it. In that same section, look for an Installed Options key. Expand it and there you should find another ATI Technologies key. Select it and erase it.
7. Still in the registry, go to HKEY_CURRENT_USER -- Software and there you should find another ATI technologies key. Select it and erase it. Once all this is done, close the registry. the registry is now clean. Though you might want to even run a registry cleaner, like the one included in the freeware program CCLEANER, it's very good, can be undone and it's safe enough to use it almost blindly.
8. Close all windows and reboot.
9. When in windows after the reboot the NEW HARDWARE FOUND WIZARD will pop up again. Cancel that. Now find the new ATI drivers that you have downloaded and extracted and run the SETUP file. Once complete, reboot and you are done. You may want to reinstall your ATI MMC software and DVD software if you use them. DONE!

ONCE YOU'VE DONE ALL THE INSTALLING OF THE LATEST CATALYST DRIVERS AND MULTIMEDIA CENTER (is a 4 part download, be sure to install the 4 parts "only the dvd codec is optional" and leave the MMC part to install at last) BE SURE TO INSTALL V.8.4 OF THE WDM DRIVERS (for the all-in-wonder 2006), OTHERWISE YOU'LL HAVE THE SAME BLACK SCREEN WHICH IS ALSO CALLED AN OVERLAY FAIL.

Restart and run your TV, it will work. Please check if your TV comes out at 240i resolution instead of 480i, you might need to disable the TV ON DEMAND feature of the tv program. This is done at the registry. Close the TV program and Run Regedit, then look at HKEY_CURRENT_USER\Software\ATI Technologies\Multimedia\Features\DTV\Channel Manager, the Key you need to change from 0 to 1 is the one called LiveMode. Close Regedit and restart. Start the TV program, and check, you should see the 480i resolution (at the top info bar), if not press ALT+3 and then ALT+2 and then ALT+1 (don't check any of the boxes in any of the questions), that should finally do it. Any problem? Just close TV program and do it all over again from the begining more carefully or trying some little variations in the ALT part.

All this solves many problems as with the TV program showing CORRUPT and BLACK or BLANK SCREENS with AUDIO which are also called OVERLAY FAILURES in many or maybe even all of the ALL IN WONDER (PCI Express or AGP) cards and even with the TV WONDER cards and USB adapters, the only difference between the cards might be the top WDM driver version you migh be able to use with an especific card. Please watch that you might need to try all the versions of the WDM available untill you find the one that works for you (the AIW2006 uses v.8.4, but for example the TV WONDER USB2.0 is able to use the latest available.)

Dec 04, 2008 | ATI ALL-IN-WONDER 2006 EDITION, (256 MB)...

2 Answers

ATI Radeon IGP 340mM/345M display driver or software needed..


Go here:
ATI Catalyst 8.2 - ATI Radeon - XP

Then, near the bottom of the page, click on:
Individual driver download packages, ATI Multimedia Center, Avivo™, and Korean full package and download the Catalyst Control Centre package (download 2 of 3)

Here is a direct link, but i don't know if it will re-main active:
AMD GAME! Drivers and Utilities
Then click on "Catalyst Control Center (English)"

This package will only install the ATi CCC. I personally have found that the ATI CCC doesn't like older cards, but some people have had luck getting it to work. If it doesn't work, you'll either have to find an older Catalyst Control Center, such as the one bundled with the Catalyst 4.10, or go back to using an old version of ATi Catalyst Control Panel.

Apr 29, 2008 | ATI Mobility RADEON Graphic Card

1 Answer

ATI TV Function Not working


Hi,

First make sure you have the latest catalyst drivers installed for your card.

ALSO:

Please make sure that your Remote Wonder software is up to date, you can try this download for an update version for Windows XP.

Or this one for windows vista

Either one may work on Media Center

Apr 06, 2008 | ATI ALL-IN-WONDER 9000 PRO (64 MB) Graphic...

1 Answer

ATI Radeon 9550 (RV350) 3D Accelerator


Radeon 9550 series.: http://game.amd.com/us-en/drivers_catalyst.aspx?p=xp/radeonx-xp
Download the Catalyst Software Suite Driver & CCC. You will find a ton of control within the Catalyst Control Center.
Remove any ATI software before installing the newer combo.
If you get a error during uninstall through the control panel run ATI's uninstaller at.:
http://searchna.ati.com/promosearch/?site=us-en&la=en&qt=cat-uninstaller&selectsite=ATI&sp_a=sp10039240&sp_p=all&sp-x-1=col&sp_f=ISO-8859-1&sp_q=cat-uninstaller&Search.x=9&Search.y=8

Jan 05, 2008 | ATI RADEON 9550 Graphic Card

Not finding what you are looking for?
Graphics Cards Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graphics Cards Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Graphics Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...