Question about Canon PIXMA MP810 All-In-One InkJet Printer

1 Answer

How do I resolve Error U150 on Canon MP810?

How can I resolve Error U150 on my Canon MP810

Posted by on

  • 7 more comments 
  • Serpentine Jun 16, 2008

    I have had a MP810 about 3 months. Recently I've been getting a U150 error message. My C tank is not lighting up and being recognised. When I open up and replace the tank the light comes on. Initially this allowed me to carry on printing but now I have a constant error message even after replacing the tank.
    Is there a permanent solution to this annoying problem?
    I would be grateful for any assistance.


  • Anonymous Jun 22, 2008

    I have the exact same problem......

  • Anonymous Jul 24, 2008

    same problem here

  • conky111 Oct 27, 2008

    I have the mp520 model and YUP...I got the U150 problem too,
    I don't think it's the ink tank though because of this...I swapped my bad tank
    (magenta) to another slot and still had a u150 but not in the slot I
    moved the tank too,it still didn't recognize the same slot even with a different
    color in it....Just thought I'd share that...Don't Buy...its fatally flawed!!!!


  • tanjalamut Oct 28, 2008

    The sam problem here. U 150 error in Canon MP510.

  • annaoption Nov 06, 2008

    I have an MP810 & recently have been getting a U150 error message. My Y tank is not being recognised. When I open up and replace the tank the light comes on. Initially this allowed me to carry on printing but now I have a constant error message even after replacing the tank.
    Is there a permanent solution to this annoying problem?
    I would be grateful for any assistance.

  • pereriksen Dec 03, 2008

    My problem is exactly the same. The second left ink cartridge i s no longer recognised by the MP810

  • stroomblok Jan 12, 2009

    mp 510, same problem U150, not an empty tank at all. looking on the net this problem seems to happen a lot. it seems to be the chip, but haven't found any easy solution yet. Canon seems to know of the problem but keeps a low profile about it, as it doesn't seem to happen in every printer they make. It's a known issue, that's for sure.

  • Anonymous Jan 28, 2009

    I've got an MP810 and getting the U150 error for my 8BK Black slot. Have tried cleaning the slot and the cartridge chip, swapped cartridges around and it still says the error is the Black slot. Even bought a new replacement cartridge and still can't print! Printer is totally unusable while getting this error!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Have had a MP810 about 3 months. Recently I've been getting a U150 error message. My C tank is not lighting up and being recognised. When I open up and replace the tank the light comes on. Initially this allowed me to carry on printing but now I have a constant error message even after replacing the tank.
Is there a permanent solution to this annoying problem?
I would be grateful for any assistance.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I have a Canon MP810 printer and the screen shows there is an error with that number: 5020. It says that I have to unlock the locker of the scanner and then restart. I have done it many times...


I have just read it on the other forum..try this one
Error Code 5020:
Scanner lock switch locked. [5020] Release the scanner lock switch and turn the power
off and back on.
Turn the machine off, unlock the scanner lock
switch, then turn the machine on again.

Hope it helps.

Sep 09, 2011 | Canon PIXMA MP810 All-In-One InkJet...

2 Answers

How do I remove the print head from my Canon MP810 printer for a clean? :o)


I just replaced my MP810 printer head. Procedure: open printer - remove ink cartridges - Pick up arm located on right side of cartridge holder- remove printer head by picking up by the cartridge slots. Place new printer head in holder - replace printer cartridges - press arm down and your done....However, the error message stays on and reset procedure doesn't remove it. Canon tech support said their solution (because of distance from canon support) is to replace MP810 with comparable printer, which came to $299 with 15% discount and free shipping. My solution, I’m checking out other printers.

Jan 11, 2010 | Canon PIXMA MP810 All-In-One InkJet...

3 Answers

Error code 6000


Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing disk film or the printer's logic board.

May 16, 2009 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

U150 Canon no cartridge recognised


Because these a refills inks the Chip things they are full so you must replace the cartridge with a new Canon one and the fault will go. If not just replace the chip with a new one!

Then your error u150 will go.

Sep 25, 2008 | Canon MP610 Photo All-In-One Printer

1 Answer

Error u150 Canon Pixma MP510


U150 error is a cartridge hardware error. Only thing you can do is replace the ink.

Sep 25, 2008 | Canon MP970 Photo All-In-One InkJet...

1 Answer

Canon IP6600D Error Message U150


you need to reset the chip on the ink cartridge.......................

Aug 22, 2008 | Canon Pixma iP6600D InkJet Photo Printer

1 Answer

Ink cartridge


Got this same U150 error code( Ink Cartridge not recognized) tried reinstalling... no luck... got a new one... no luck.... now collecting dust after I completely disassembled my MP830, checked all connections and reassembled it... stil the same U150 error code....and a new HP 7280 is on its way.... if a fix comes up for this.... I will have it fixed.. GREAT all-in-one! This is the only problem I have ever had with it...

Jun 29, 2008 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

It appears U150 the following tank cannot recognized.. All ink are full


has anybody a solution for these crappy ip6600d canon printers constantly getting the u150 error, i've got a brand new canon catridge but to no avail, it still complains.

Jun 24, 2008 | Printers & Copiers

1 Answer

U150 error message


There was plenty of ink left in my Cyan tank but just replacing it with a new Canon CLI-8C one, as suggested by techguru005, did the job. I suppose that the chip must have been faulty?
Let's see how long this one lasts!
Thanks, techguru005, it's fixed for now.

Jun 16, 2008 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Error code 5010


There's no specific info on a 5010 error even on Canon website, but ANY error in between 5000-9999 needs Canon's attention, so if it's under warranty, get a replacement.

Feb 17, 2008 | Canon PIXMA MP810 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP810 All-In-One InkJet Printer Logo

1,920 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

old marine
old marine

Level 3 Expert

1453 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...