Question about Computers & Internet
MAXTOR IS NOW OWNED BY SEAGATE.
LOG ON TO THIS SITE TO DOWNLOAD THE SOFTWARE:
THIS SHOULD AOLVE YOUR PROBLEMS.
Posted on Jan 23, 2009
U dont need to install the drver for installing a hdd in computr place it along the existing hdd do remove the jumpers and it will run ike any thing
Posted on May 29, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 01, 2013 | Maxtor Computers & Internet
Jul 22, 2011 | Maxtor Hard Drive
Basic jumper settings for Maxtor ATA Hard Drives
Thank you for purchasing your new ATA hard drive from Other World Computing! Please
review these jumper settings prior to installing your new hard drive into your computer.
You may want to review more detailed information about the installation process, or
the location and configuration of your existing internal ATA drive before proceeding.
Your manual that came with your computer can be of assistance in both of these
A few notes about installing an ATA hard drive into your existing system:
Your existing drive is normally configured one of two ways, Master (single drive), or
Cable Select. You will want to determine this before installing your new drive, the easiest
way is to remove the existing drive from your system and visually inspect it's hard drive
jumpers. Most hard drives have a schematic either silk screened onto the case of the
drive, or the schematic is on a label near the jumper pins. If you have difficulty locating
this information, visit the hard drive manufacturer's website.
If your existing hard drive is configured as "Master", then set your new hard drive
to "Slave". If your existing drive is set for "Cable Select", then set your new drive to
"Cable Select" also. You can change the existing jumper settings on the original drive
to suit your needs, but we recommend following these instructions first to verify proper
operation of the new hard drive.
Installing jumpers on the new drive is a simple process, follow the schematic to
configure your drive.
Please note the configuration of
the internal ATA cable already
installed in your existing system.
If your internal cable is configured
differently than pictured here,
you may want to replace it before
installing a new hard drive to
achieve maximum performance.
For further assistance, visit our tech center at http://eshop.macsales.com/Tech/index.cfm
Mar 10, 2011 | Computers & Internet
Jan 06, 2011 | Maxtor OneTouch 4 Mini 160GB External USB...
Dec 03, 2010 | Zebra Symbol MC70 HandHeld Mobile Computer...
Jul 25, 2009 | Computers & Internet
Jun 16, 2009 | Maxtor OneTouch III Mini Edition (R01E100)...
Apr 03, 2009 | Maxtor Personal Storage 3200 (U01E200) 200...
Dec 27, 2008 | Maxtor OneTouch III Mini Edition 120GB...
Apr 11, 2008 | Symbol MC70
262 people viewed this question
Usually answered in minutes!