Question about Rex RX-518

2 Answers

HOW TO THREAD

MY REX DID NOT COME WITH A MANUAL...I HAVE ASKED OVERSTOCK.COM BUT HAVE BEEN WAITING FOR A REPLY FROM THEM. ANY ONE CAN HELP ME WITH THREADING INSTRUCTIONS?

THIS IS MY FIRST BLIND HEMMING MACHINE....SORRY...I DON'T HAVE A CLUE HAS TO HOW IT WORKS. ANY SUGGESTIONS?

ALOHA;/LINDA

Posted by on

  • chinquapiney Jun 01, 2008

    Hello,

    I purchased a rx-518 at a swap shop that had no instruction booklet. I took it to a sewing machine repair man and he showed me how to thread, and how to adjust the thread tension and also the lever underneath that pushed the fabric up so that the needle will catch. I would be glad to discuss it with you.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Go to www.reliablecorporation.com. Under products check out the MSK555 blindhem machine. It is the same as the Rex 518. To the right of the page is a category to download the manual. It is very helpful. I have the Rex518 with the original instructional manual, but the translation into English was very poor. The MSK555 is published so you can understand the manual, and figure out how to use your machine. I too am a first time user of a blind hemming machine.
Good Luck.

Posted on Jun 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Threading REX Model 100

Posted on Jul 19, 2008


1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I would like an instruction manual


[PDF]5, 6, 8, 10 Stitch Sewing Machine - Singer

www.singerco.com/uploads/download/448_5_6_8_10_slide.pdf
exclusives, like a removable extension table ... This Singer Sewing Machine was tested according to. European ... Read all instructions before using this machine. ....The needle and thread you choose will depend upon the fabric being sewn.

Instruction Manuals ' Singer Sewing

www.singerco.com/support/instruction-manuals
Our replacement instruction manuals are provided in a downloadable PDF file ... To download a manual, you will need to know your machine's model number.

[PDF]INSTRUCTION MANUAL 9960 - Overstock.com

www.overstock.com/.../Instruction_Manual_14253523.p...

Overstock.comThis sewing machine is not intended for use by young children or infirm persons without ... The wrong plate can cause the needle to break. 12. Do not use bent ...

Free Sewing Machine User Manuals ' ManualsOnline.com

homeappliance.manualsonline.com > Household Appliance
Find the user manual you need for your home appliance products and more at ManualsOnline. ... First Virtual Communications Sewing Machine Manuals.

Manual Finder « Sew it Works!


Jan 07, 2016 | Sewing Machines

1 Answer

My euro pro EP382 problem: needle goes down & then it locks up. When I free it there is an extra thread with the bobbib thread that comes up. What can I do to fix this?


Euro Pro Sewing Machine - YouTube

? 0:59
https://www.youtube.com/watch?v=QndkRbDfM2w
Jan 20, 2009 - Uploaded by simplysoldstore
Euro Pro Sewing Machine. ... on piece on top then runs downthe right side of long and around the bottom up ...

EURO-PRO 380 INSTRUCTION MANUAL Pdf Download.

www.manualslib.com > ... > Euro-Pro Manuals > Sewing Machine > 380
Sewing Machine Euro-Pro Dressmaker 998B Owner's Manual ... take-up lever Palanca tensora de hilo Presser Foot Prensstela Needle plate ... Drop Feed Control / Control De Gota A. Push feed dog lever down to drop feed dog below needle plate for darning, embroidery and button sewing. .... This manual also for: Ep382 ...

Euro Pro Mechanical 30 Stitch Sewing Machine - Overstock ...

www.overstock.com > ... > Sewing Machines

Overstock.com
Rating: 4.4 - ‎5 votes - ‎$119.99 - ‎Out of stock
Shop for Euro Pro Mechanical 30 Stitch Sewing Machine. ... I can sew in the middle of the night and not worry about waking anyone up, it is so quiet, and it sews ...

Amazon.com: Distinctive Even Feed Walking Sewing ...



Jan 05, 2016 | Sewing Machines

2 Answers

Where can I get a downloadable manual for a Rex 11-155R


www.industrialmanuals.com

Try the above .
Rex-Hitachi-Industrial-Sewing-Machine

Jun 04, 2014 | Rex RX-518

1 Answer

My name is Patricia, I have a brother machine model xl-2230, I have many problems to be able to sew with her when sews very loose coil wire, and that entanglement does not allow sewing thread. Despite this...


Set the tension control to what is recommended in the manual.

Thread the machine with the presser foot up and your stitching should be well formed.

Be sure to use the type and size needle appropriate for the type of fabric than is being sewn.

May 05, 2010 | Brother XL-2230 Mechanical Sewing Machine

1 Answer

REX blindstitch hemming machine motor quite hot. Locking stitch


I know this is a VERY late answer, but I hope it can help others. The direct wholesale importer for the REX RX518 blindstitch hemmer (and the same company who is possibly involved in its manufacture) is Artek Sewing Machine Supply in Brooklyn, NY (800-221-9440).

Artek seems to be the only company with whom to speak about this machine. They sell and "service" the RX518 (which may mean throwing them away and giving out another if they feel like it)! It is a company that does business as both "REX" and "Artek." This is not as good as dealing with Viking, Bernina, etc. for sure, but at least it's something!!

Dec 15, 2008 | Rex RX-518

1 Answer

Huskylock SL3003 Overlocker


I also have a Huskylock SL 3003 which I have not used for many years. As I usually keep the manual with the particular item, and there was no manual with the machine, I presume there was not a manual for this machine. (I also found Husqvarna useless!)

There is a website which copies manuals for sewing machines and I have asked them if they can find the manual for the SL 3003. As yet I have not had a reply. I only requested this on 1st September, so am still waiting hopefully. You may also wish to use this website: www.sewing-machine-manual.com or relics.com

Also, on the front of the machine is a slide with a thumb indent. Push this to the right and it will release. On the machine inside this door are the instructions for threading.

Good luck

Jun 11, 2008 | Husqvarna Huskylock Computerized 936

Not finding what you are looking for?
Rex RX-518 Logo

Related Topics:

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rex Sewing Machines Experts

Chance Miller

Level 2 Expert

381 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

ray gallant

Level 3 Expert

40945 Answers

Are you a Rex Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...