Question about Alpine Car Speakers & Subwoofers

1 Answer

Error 1 on alpine cha-s364 - Alpine Car Speakers & Subwoofers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Quick Note: It's really helpful to your cause if you make sure you include more information about your system and what you're doing to get an error.

It's also a good idea to make sure you type in your model number correctly - you've typed in cha-s364 (the actual model you're talking about "I think" is a CHA-S634 - please verify!!

Here's a link to the user manual

As for the E-01 Error message on your CD Changer:

The E-01 reading is an error message, usually because the changer magazine is jammed in the changer. To manual eject out the magazine, take a thin plastic ruler (at least 5-1/2" in length) and slip it between the bottom of the magazine and the changer. Now, push in. This will hit a release button in the back. If the magazine does not eject, you will need to send the unit in to be serviced. To locate the nearest authorized service center to you call 1-800-ALPINE-1.
Note: if the magazine is half way out, but jammed, DO NOT try to release the magazine. You will need to send the unit in to be serviced by a technician.

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I connect an Alpine CD Changer CHA-S624 using an Ai-NET cable to Pioneer DEH-6050UB?


No. Pioneer products will only read Pioneer Products. Either with a CD-IU200V cable or a usb cable

Apr 05, 2011 | Pioneer Car Speakers & Subwoofers

1 Answer

I have the alpine D106 and I would like to know if it's possible to install another EQ


The unit comes with 3 rca audio outputs, 1 composite video/audio output & 1 Toslink digital audio output so i would have to say the answer is YES.

Nov 11, 2010 | Alpine Car Speakers & Subwoofers

1 Answer

Alpine 4714S - (1) Radio stations won't stay set. (2) Can't set clock


In my experience with aftermarket installs, the unit has to be powered from a source that is always active. Example: the wipers, or blinkers or power windows won't work when the key is off. Your Alpine might be connected to a power source that doesn't send power until the car is on and running. Hence it won't store your radio stations or keep correct time. Check to see how the power for the Alpine is tied into your car.

May 23, 2010 | Car Speakers & Subwoofers

1 Answer

I just wired my alpine type 12 4 ohm subwoofer to two ohms by putting the two red runners in the positive terminal and the two black runners to the black terminal and hooked the wires up to the outside...


If you have the Alpine SWR-1222D, that's a dual 2 OHM Sub. So, the way you have it hooked up to the amp ,it's 1 Ohm, and unless your amp can safely operate at 1 OHM, you are better off connecting the voice coils in series so the amp will see 4 OHMS. The link below will show how the connections are made to the amp. Look at example # 1.

http://akamaipix.crutchfield.com/Manuals/500/500SWR1242.PDF

Hope this helps!

Aug 19, 2009 | Alpine SWR-1222D 12" Type-R Series...

1 Answer

Need a alpine dvd IVA-D900R detachable face


If you cant buy one from Alpine (usually costs half the cost of head) then you might be out of luck. For the price of faceplate, youre half into a whole new unit just about!

May 12, 2009 | Car Speakers & Subwoofers

1 Answer

The model i have int listed above, can you help from what i wrote?


HAVE A LOOK ON EBAY WHICH NORMALLY SHOW YOU PICTURES OF ITEMS FOR SALE AND MATCH THE CONNECTIONS ON YOUR ITEMS TO THE LEAD IN THE PICTURE

May 04, 2009 | Car Speakers & Subwoofers

1 Answer

Bostom tweeter cutting out


get a new tweeter. really, if its starting to cut out, or static, then its prabably old and need a new 1
hope i was help :)

Apr 28, 2009 | Car Speakers & Subwoofers

1 Answer

How to wire 2 ohm 2 12ich alpine type r's to box terminals?


Dual 4 ohm subwoofers can only be wired @ 1 ohm, 4 ohm or 8 ohm.
2 ohm mono load is not possible.
You will need to use (1) subwoofer to get the 1000W out of the amp.
Wire both positives on one sub to + on amplifier and both - on the same sub to - on amplifier to give the amplifier a 2 Ohm load.
Add a second amplifier, or buy an amplifier that is 1 ohm mono stable.
You can wire both to the amplifier at 4 ohms 600W, but they will share the power and only see 300W ea.

Jan 12, 2009 | Alpine Type-R SWR-1242D Car Subwoofer

1 Answer

Car audio


As long as the crossover keeps the frequency going to the tweeters within a safe range (I'd say about 500hz+, read the box or look it up by model number) they should be just fine. That is what the crossover is for.

Apr 01, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Speakers & Subwoofers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Alpine Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...