Question about Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

The lamp that I placed in the SONY WEGA KDS-R60XBR1, keeps blowing out in about a week(twice), I keep getting the a red light that blinks 3 times....can anyone help me??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,622 Answers

Hello,
You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where,but otherwise Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope this help in solving the problem, Take care.....

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 3 blinking red lights on my Sony SXRD TV?


Very easy answer! Your door is not seated all of the way. I assume you resolved it by now, but anyone else who searches this issue may need this advice. The doors warp as they age so it may seem seated when it is not. The TV will not turn on without the door fully installed.

Jun 10, 2015 | Sony XL-5100 Projector Lamp for Grand WEGA...

1 Answer

Sony KDS R60XBR1 red light blinking 3 times. Replaced lamp, cleaned all vents, replaced cover door properly.. What else?


You may need to take off the back cover and clean the fan and if you can, put a little oil on the fan shaft. I also use a small vacuum to get more of the dust out around the fan. You can blow out some of the dust but be careful as you don't want to blow dust into the lamp area. When you take off the back cover you'll be amazed at the amount of dust in there!

Feb 12, 2015 | Sony Televison & Video

1 Answer

Why does power stanby light blink red four times on sony wega lcd model kds-r60xbr1


That error code represents a fan has stopped turning. There are 4 fans. A lamp cooling fan, a lamp ballast fan, a digital board fan, and a light engine fan(internal to light engine--not visible.)

Oct 07, 2014 | Televison & Video

1 Answer

Red standby blinkig light 4 time on a sony 60 in wega


4 Blink 9 out of 10 times is your lamp fan. Check and make sure it clean and free of debrey. Spin it and see if there is any grinding noise. If after you clean and reassemble and the set still shuts down, either replace the lamp fan or check your outher 3 fans as well.

Apr 26, 2012 | Sony KDS-R60XBR1 60" Projection HDTV

2 Answers

Sony sxrd kds-r60xbr1 flashing red light all the time


Are you sure the lamp is pushed in far enough and did you make sure you screwed cover back on tightly?

Mar 13, 2011 | Sony XL-5100 Projector Lamp for Grand WEGA...

1 Answer

Sony tv red light blink 4 times on 60" WEGA


When your red light blinks four times on the Sony KDS-R60XBR1 60 inch HDTV, this is an error code for a stopped up fan. You will need to check the ASU board to verify Fan1-4 power to the fan is supplied, next check the fan connector to make sure it is properly connected, and finally make sure the fan is not caught in the wires or harness.

Feb 27, 2011 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

New lamp is placed in tv, but tv won't come on. Light in front of power button is blinking green, then blinks red. Not sure what the problem is


One question, why you decided to replace lamp in tv? Did tv showed red lamp light blinking?
Suggestion, make sure lamp cover has been placed back in its position after lamp replacement, lamp cover is first thing that you removed from tv cabinet to take out lamp.

Oct 05, 2010 | Sony XL-5100 Projector Lamp for Grand WEGA...

1 Answer

I have a Sony Wega SXRD. First issue was the


No. Could be a bad ballast this time. That is the box that energizes the gas to produce light. Bulb has no filament.

Sep 10, 2017 | Sony XL-5100 Projector Lamp for Grand WEGA...

1 Answer

KDS R60XBR1 Red Light blinks 3 times when turning


on my xbr tv there is a little *** that sticks out on the lamp cover. the wrapped and it wont work light flashed 3 time with a new cover it worked fine. there was a t. s. b. for an over heat problem new fan and sensor and door. go to sony.com its there

Mar 22, 2009 | Sony KDS-R60XBR1 60" Projection HDTV

Not finding what you are looking for?
Sony KDS-R60XBR1 60" Projection HDTV Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...