Question about D-Link DWL-G700AP 802.11g/b Wireless Access Point

1 Answer

WEB configuration problem.

Hello guys i have this DWL-G700AP+ device, last week there were 2x power failure. It's running normally after booting up all the device/cpu's. Today i try to allow new Wireless Clients users Mac address, but i could not go to device WEB configuration. My access point is working well - I can get internet access, but not for new user laptop. I have tried resetting the access point so that it's at its default settings. I'm missing something - does anyone know something I should be trying?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 611 Answers

Http://support.dlink.com/emulators/dwlg700ap/ i give you this web page address go it is a helpful to .

Posted on Jun 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I use the dwl-g700ap as a repeater?


Hello,
Yes, the DWL-G700AP can be setup as an AP or a repeater as long as your current wifi router is also 802.11g/b.
You can find instructions here: http://www.docstoc.com/docs/2583739/How-do-I-configure-repeater-mode-on-DWL-G700AP
Regards, Chris

May 18, 2011 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

How can i find the ip address of my Wireless Access Point device? (model DWL-G700AP)


Hi, here's how you can find your access point's IP address:

The access point is also your default gateway, because it's the device that you use to access the Internet, right? Open up a command prompt window (go to the Start menu, click on Run, type "cmd" and then hit Enter) and type "ipconfig" and hit Enter.

A bunch of information will appear. The one you want to look for is the one called "Default Gateway." The IP address that appears following "Default Gateway" is your access point's IP address.

Please rate this solution based on how helpful it was. (If you still can't find the IP address, add a comment and I'll be happy to reply.)

Sep 18, 2010 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

Unable to reset my DWL-G700AP by holding in the reset button and can not connect to or ping via 192.168.0.50


Under Windows 7, press the "Start" button.
Type 'cmd' into the search-box, and press ENTER.
Type 'ipconfig /all', and press ENTER.
Look for the IP-address for the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.

Jun 22, 2010 | D-Link Air Xpert DWL 7000AP (DWL-7000AP)...

1 Answer

I am using D-Link DWL-G700AP connected to Motorola modem ... on my PC I have connected Linksys Adapter but it got connected for few days for last 2 day I am getting IP address acquire is taking time and I...


This problem occurs because of DHCP issue in router.
Your computer not get proper ip for connect network.
For that first reset router to defaults.
Press RESET button for 10 seconds it is in back side of router.
Then connect router to computer with ethernet cable.
Then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration of your router.
Set WAN settings as your internet service provider settings.
Enable DHCP in advanced.
click on wireless or wi fi menu and enable wi fi .
Enable WEP or WAP security if you want to secure then add key it is your password to connect internet.
Then save and restart router then check.
Let me know if you need more assistance.

Nov 09, 2009 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

I can't hard reset my DWL-G700AP even though i press the button longer than 5 seconds. the device doesn't reboot. what seems to be the cause?


do one thing pull out the power cable from the device after then same time put the power and press the reset button on same time press up to 10 sec after then press one or two time then you get it

Apr 14, 2009 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

I receive excellent signal from DLink dwl-g700AP but can't browse


On this tip you can find an easy check list let me know if you need more help

Feb 02, 2009 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

Unable to update firmware


Your router latest Firmware I can see on D-link website is 1.02
If you are referring to German web site page showing a dwl-g700ap_fw_revB_v213b06.zip file be sure to follow the instruction to UNZIP the web_dwlg700ap_v200_r11_0408.bin file:
DWL-G700ap Firmware Update

- Browser starten
- Konfiguration des DWL-700ap aufrufen (Standard IP 192.168.0.50)
- oben auf Tools
- links auf Firmware
- auf den Knopf Durchsuchen klicken
- die Firmware Datei (web_dwlg700ap_v200_r11_0408.bin) auswählen
- auf Apply klicken

Wenn die Firmware installiert und der DWL-700ap dann neu gestartet ist klicken Sie oben auf Tools/System/Restore to Factory Default.

Danach ist die Firmware übernommen.

If you did not unzip the bin file router cannot run it as firmware update
More over be sure to run the update via LAN cable connection (no WLAN)

Jan 24, 2009 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

DHCP option is disabled when LAN IP is Dynamic on DWL-G700AP


that is right the access point does not have a dhcp server. that will give an ip address to all of your computers or device connected to it wireless. If you have a modem with a dhcp server there will be no problem with the IP but if the modem does not you must have a router and now an access point.

Aug 07, 2008 | D-Link DWL-G700AP 802.11g/b Wireless...

3 Answers

Factory reset dwl g700ap


Bill,

I have here the steps on how to reset your device.

To perform a reset, please follow steps below:

Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.

Step 2 Hold paper clip down for 10 seconds and release.

Note: Do not repower unit during this procedure.

Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

Jun 05, 2008 | D-Link Air Xpert DWL 7000AP (DWL-7000AP)...

Not finding what you are looking for?
D-Link DWL-G700AP 802.11g/b Wireless Access Point Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...