Question about Vintage Jukebox External Speakers Shelf System

1 Answer

Can auxiliary speakers be added to a Rowe/AMI Model CD 100K? If so, where do they connect?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 195 Answers

Hello,

Yes they can. Above the amplifier compartment you should see the output package. The output package is where the phono speakers are connected to but this can be used to provide output to extention speakers. E1 to E7 tappings left and right provide outputs at different voltages/wattage. E1 left and right is the comon (or ground connection) E2 is the lowest tapping and E7 is the highest. Most people would connect extention speakers to E3 or E4 left & right with the comon connections of the speakers to one of the E1's.
There is also connections for 70 volt line speakers, these are used where long cable runs are needed and the speakers are then fitted with 70 volt drop down transformers to the correct wattage of the speakers. These are available from most good electroic suppliers such as R.S. or Maplins etc.

Regards
Alan Hood
ami-man
Uk

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust speed of 45 record a little slow on my Rowe Ami JBM 200


If there is a speed adjustment (refered to as "pitch") the there would be a small dial knob near the base of the tone arm.

Jun 02, 2016 | Audio Players & Recorders

1 Answer

Selections already made on jukebox, how do I clear them


Hello stillwell42,

What model is your Rowe Ami jukebox, there will be an information label on the back or inside the jukebox with the serial number and the model type. We can suggest a solution once we know your model type.

Regards
Alan

Alan Hood
ami-man
UK

Mar 13, 2015 | Audio Players & Recorders

2 Answers

I have a Rowe Ami cd 100 that we just got.The cd,s skip-music starts and stops, and it seems like the machine is not reading them [sometimes it picks a cd and returns it to rack].Anyone have any...


Hello,

Did you lock down the jukebox mechanism (caurosel) during transportation?

Make sure that all the plugs that go to the all the circuit boards are fully seated, Unplug each in turn and plug back in MAKE SURE YOU UNPLUG THE JUKBOX FIRST if this does not sort out your problem look at the microswitches on the transfer motor (this is the mptor that tranfers the CD onto the deck) the spades on the microswitches are uninsulated so they can short out if pressed together.

The other main problem with Rowe Ami is that the boards are prone to the connection pins having dry joints (cold joints in the USA) on the soldinging to these connection pins.

It may be as well having all the boards tested by a Rowe Ami specialist.
In the USA the best guy is Bruce Wentworth (search for his details on Ebay by putting in Bruce Wentworth jukebox) or you could contact me in the UK.

Regards
Alan Hood
ami-man
UK

Apr 29, 2010 | Wurlitzer Jukebox CD Player

1 Answer

Rowe Jukebox Model R-93


Hello,

I suggest that you get a manual from www.victoryglass.com if you do not already have on, all the instructions for setting up the CCC will be in the manual.

Regards
Alan Hood
ami-man

Apr 29, 2010 | Wurlitzer Jukebox CD Player

2 Answers

Rowe Ami R-80 imperial jukebox


Hello Andy,

Yes I know the 1976 Rowe Ami R-80 jukebox very well as well as most of the other Rowe Ami jukeboxes.

The turntable motor and the lighting work off of the 110 volt output from the power supply.
The other power voltages are connected to the power supply via the molex plug.

Pin 1 30VDC white/red
Pin 2 30VAC yellow/black
Pin 3 Common black
Pin 4 Ground gren/yellow
Pin 5 No connection
Pin 6 Common black

All the voltages are protected by circuit breakers.

I assume that you may be in the UK if this is the case here are my contact details.
Alan Hood (ami-man)
Games Unlimited & Datex Systems
Units 4 & 5 Lion Park
New Street
Halfway
Sheffield
S20 3GH
0114 247 0242 phone
0114 251 0727 fax
alan-hood@datex.co.uk

Jan 20, 2010 | Vintage Jukebox External Speakers Shelf...

2 Answers

My rowe ami cd100 plays but there is no bass only


Hi Easiest way to check if its the amp. Is to disconnect the internal speakers the connect a standard hifi speaker to it .If that plays fine its not your amp If it is your amp and your on a budget and the repair could be costly. Many times ive refitted a yamaha 250 watt hifi separate amp to just the cd out cable coming out of the cd player inside machines. Easy to do and only costs around £50 for a second hand one. Instead of £300 for the original. Worked for me many times and my customers have been very happy. Hope this helps.

Cheers Dandares

Jan 18, 2010 | Wurlitzer Jukebox CD Player

1 Answer

How do I slow the speed of the 45s on my rowe r-92 jukebox .The records are playing a little too fast


Hi,

The turntable motor on the jukebox range of R-84 to R-93 is none adjustable.
If you are in the USA then the motor operates on 60hz but in Europe it would have to be on 50hz to do this a different pulley is used.

The Rowe Ami part numbers are as followes:-

30791907 Turntable Motor Assembly 60hz
30791908 Turntable Motor Assembly 50hz
21817801 Motor Pulley 60hz
21817802 Motor Pulley 50hz

These can be ordered from a Rowe Ami dealer or you could try www.victoryglass.com

Regards
Alan Hood
ami-man
UK

Oct 28, 2009 | Wurlitzer Jukebox 1015 One More Time...

3 Answers

Rowe Jukebox CD-100E. When I turn it on the


AT THIS TIME YOU ARE NOT SURE IF THE PROBLEM IS IN THE LASER ASSEMBLY, OR THE AMPLIFIER?
BORROW OR RENT, AN AMPLIFIER HOOK IT UP TO THE OUT PUT ON THE LASER OUT PUT ON THE LASER CD OUT PUT. LOOK AT LASER UNIT IT HAS A MARKING ON IT THAT SAYS AUDIO OUT PUT. PUT CABLE TO A SECOND AMPLIFIER.
THAT WAY IF IT STILL FADES. THEN THE CD LASER IS THE PROBLEM . IF THE SOUND IS GOOD THEN THE AMPLIFIER IS AT FAULT
DOCTOR FIX IT

Oct 23, 2009 | Wurlitzer Jukebox 1015 One More Time...

3 Answers

I have rowe ami jukebox Eagle Laser Star and its amp seems to be dead sin have no sound justa a buzz. Need to find one or how to repair it.


CALL AB JUKEBOX SERVICE--ASK FOR BRUCE--TELL HIM LES FROM RMC VENDING SUGGESTED YOU CALL HIM.-
603-382-6272

Apr 27, 2009 | Wurlitzer Jukebox CD Player

2 Answers

My cd rowe ami jukebox is stuck in scan/transfer mode


Hello,

You say you do not have the digital display lite up, have you checked all of the breakers on the power supply?
If not do so. Rowe Ami jukeboxes are very prone to dry joints (cold joints in the USA) this is cracking around the soldered pin on the connections to the boards.
If you can solder correctly then check out the printed circuit board on the power supply. I would retest and see if the display now lights after correcting a fault on the power supply.
If that has not made any difference then proceed to the Mechanism Control Board and the Central Control Computer (CCC) and check again for dry joints.

If you can not solder with any confidence then send in your boards to a Rowe Ami specialist for testing/repair.

Regards
Alan Hood
ami-man
UK

Mar 10, 2009 | Wurlitzer Jukebox CD Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

1,026 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vintage Audio Players & Recorders Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Gilbert Ruiz

Level 2 Expert

271 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Vintage Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...