Question about eMachines EL135203 PC Desktop

2 Answers

My brand new emachines el1352-03 doesn't turn on. Everything is plugged in.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • eMachines Master
  • 5,660 Answers

1) Faulty Power On switch. (Located inside the plastic Power On button)

2) Faulty Power Supply.
Not to diss eMachines, but they're known for using low quality Power Supply's. Saves them money.

Your eMachines should still be covered under warranty. Suggest you contact eMachines Support for some satisfaction.

If this is not what you had in mind, please post a further up in a Comment, as to how I may be of help.

Posted on Oct 07, 2010

  • oz5six Oct 07, 2010

    it was the power source switch in the back. It was set to 230 instead of 115. I didn't know it had that sort of thing. Thanks for all your help.

  • joecoolvette
    joecoolvette Oct 07, 2010

    Glad you fixed your problem. Come see us again.


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 388 Answers

Try a differant socket or take it back to the shop where you purchased it.

Posted on Oct 06, 2010

  • oz5six Oct 07, 2010

    I appreciate your help, but it's a little more complicated than that. It's my own fault, I should've added more detail. Everything else plugged into the same socket works. The speakers plugged into the USB in the back are powered up and the Ethernet cable in the back of the computer has a blinking led. But when I push the power cord nothing happens.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Emachine doesn't recognize the ethernet cord when plugged in

Sounds like the integrated ethernet port has gone bad. You can install a new ethernet card in one of the PCI expantion slots. Then plug the ethernet into the new card, this should take care of the problem. You can not repair a bad integrated ethernet port.

Feb 20, 2012 | E-Machines eMachines Desktop PC

1 Answer

My et1831-05 will not turn on when I push power button

First make sure is properly plugged to the wall outlet, then if is plugged properly and doesn't turn on, then probably there is a problem with the power supply for your computer motherboard, nothing to do buy a new one. :-S
This is what you have to buy!

Jan 12, 2012 | E-Machines eMachines Desktop PC

1 Answer

Battery is brand new, connection is good at the battery. All fuses are good. Turn key on and nothing happens. We ran a wire from the postitive side screw on the fuse box to the pos lead off the battery and...

You've checked the connection from the fuse to the batterie but have you tried to bypass the keyswitch, it could be the switch doesn't connect inside or the key doesn't turn the switch inside.

Jun 11, 2011 | 1987 Suzuki GV 1400 Cavalcade GT

1 Answer

Brand new Whynter ARC 12 SD, just plugged in and red warning light about power button is blinking. Booklet says the light will blink when water reservoir needs to be emptied. But, it's brand new, no...

Check the positioning of the water bucket It may be slightly out of place and is not triggering the switch. If that doesn't solve the problem. Turn the Master ON/OFF Switch to OFF, unplug the unit for 12 - 15 minutes. Then plug it back in and turn the Master Switch ON/OFF Switch to ON. Set the controls and it may have reset itself.

If none of the above soled the problem contact the manufacture's Customer Support or Tech Service Dept.

Hope this helped you to solve the problem. Please let me know. Thanks.

May 05, 2011 | Whynter Portable Air Conditioner

1 Answer

HDD led flashes non-stop after case swap (emachine et1331g-03w)

it will be next to ur power led or u will find hdd led wrritten on the motherboard

Jun 04, 2010 | E-Machines eMachines Desktop PC

1 Answer

I have an emachines computer. Its new and runs great but why does "VGA" appear with the blue plug when I first turn it on? Everything works!!!!!!!!

It is probably just your monitor telling you that everything is connected, Those emachines are pretty User Friendly, I can almost guarantee there is nothing wrong. Congrats on your new buy :)

Jan 07, 2009 | E-Machines eMachines Refurbished EMA...

2 Answers


Have a tech, or mabe yourself if you're so inclined, chec kto see if the video card, or other card, is plugged in fully. sometimes these get partially unplugged.


Aug 18, 2008 | E-Machines eMachines Desktop PC

1 Answer

Rebuilding my emachine 2200

Look at the board carefully and find what looks like a model number or brand.
eMachines does not make their own boards (at least didn't) so the info you seek will be available from the board manufacturers website.

Just as a tip though, it is nearly impossible to mis-connect the cables and devices.
Remember, this kind of stuff is being assembled by Chinese (former) farmers any more; it ain't that tough.

Jun 17, 2008 | E-Machines eMachines Refurbished EMA...

Not finding what you are looking for?
eMachines EL135203 PC Desktop Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

brian soufane

Level 3 Expert

693 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides