Question about Epson Office Equipment & Supplies

1 Answer

I'm trying to put ink into the ink cartridge, we just bought it today. Whenever I try, theres a pop up that says "printhead failed to move ink cartridge into position" what do i do ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 40 Answers

Maybe your ink cartridge is stock. try to pull out the ink then put it back turn off your printer then on if still not solve, just bring it back where you buy you have your warranty for that to replace.

Posted on Oct 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

New ink cartridge put in today, printing out faded and with line thru font


try to remove both cartridges and put them back in. make same print. if of no use, run a Clean Printhead in your men. If still of no use, then printhead needs a replacement

May 26, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

The colour is completely off


Kindly reseat the cartridges 2 times and then close the access door .Click on Menu on the printer and scroll down and choose Clean printhead and select "deep cleaning"
Print a demo sheet after the cleaning process has been completed. If ur issue persists, Call Kodak @ 1800 421 6699 and they will replace printhead of the printer free of cost.
Printhead is the part which takes the ink out from the cartridges. Probably the printhead of the printer has gone bad.

Nov 25, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

When I put a new color ink cartridge in, (and I don't print a lot in color), in just a few days, my printer says that my color ink level is low and I will need to replace the cartridge soon. I have bought...


Hi,

You may try the steps below.
1.Remove the ink cartridges.
2.Reseat the printhead.

a. Lift the printhead release latch
b. Reseat the printhead, pushing firmly on the white label on the printhead (if provided) or the center of the printhead, until it clicks into place.

NOTE: You may also visit www.kodak.com/go/printheadsupport for demonstration on reintalling the printhead

3. After the printhead has been reseated, re-insert the ink cartridges into the printhead, make sure that the cartridges snap into place.
4. Close the access door.
5. wait for the printer to initialize.

If issue persists, printhead or the printer itself needs to be replaced. Call 1.800.421.6699


Thanks.

Regards,

Neerak21

Sep 24, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

I have a kodak 5500 aio printer. I replaced the


Try the following:

1. Open the printer access door.
2. Put out both ink cartridges and the printhead.
3. Let the printer access door open.
4. Put out all paper.
5. Pull out the ac adapter at the back of the printer.
6. Wait 60 sec.
7. Pull in AC adapter.
8. Wait 30 sec. then turn on the printer
9: Wait for the error message: Printer access door open.
10. Close the printer access door.
11. Wait for the error message: Printhead is missing.
12. Open the access door and put in only the printhead and the close the access door.
13. Wait for the error message: both ink cartridges are missing.
14. Open access door, put in only the black ink cartridge, then close the acess door.
15. Wait for the error message: Color ink cartridge is missing.
16. Open access door, put in the color ink cartridge and then close the access door.

If the error is solved, do a firmwareupdate right now.

You can find it here.

Sep 22, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Bought a new ink cartridge for 5300 printer - all photos were purple. Replaced ink cartridge with another new cartridge and now photos are green/yellow.


problem with printhead. go to www.kodak.com/go/printheadsupport and then try to remove printhead from printer. put it back again into carriage,install cartridges and then clean printhead from home center software. u r issue will be resolved

Jul 28, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

4 Answers

Printhead problem (black/yellow) on HP L7780


When you removed the paper it's possible your damaged it and that's why the message is not going away. Did you try to put the cartridge back in to make sure it had not come out of position and just remove the power cord for a minute then plugging it back it.

Here are the steps to make sure you properly change the cartridges and the heads...

Install the ink cartridges and printheads Step one: Install the ink cartridges All four ink cartridges must be correctly installed for the HP All-in-One to work. Follow the steps below to Install cartridges:
  1. Open the ink cartridge cover.
  2. Remove each ink cartridge from its package.
  3. Align each ink cartridge with its color-coded slot and then insert the ink cartridge into the slot. To ensure proper contact, press down firmly on the cartridges until they snap into place.
  4. Close the ink cartridge cover.
Figure 1: Installing cartridges c00841893.gif 1 - Open the ink cartridge cover. 2 - Remove the ink cartridges from the packages. 3 - Install the ink cartridges. 4 - Close the ink cartridge cover. Step two: Install the printheads Follow the steps below to install the printheads.
  1. Open the top cover of the printer. Figure 2: Open the top cover c00848391.gif
  2. If the carriage does not move to the left automatically, press and hold the Resume button (c00847980.gif ) for three seconds. Wait for the carriage to stop moving.
  3. Remove the cardboard cover from the printhead carriage. Figure 3: Remove the cardboard cover c00848392.gif
  4. Lift the printhead latch. Figure 4: Lift the printhead latch c00848393.gif
  5. Before installing a printhead, shake the printhead up and down at least six times while the printhead is still in its packaging. Figure 5: Shake the printhead while it is still in its packaging c00847983.gif
  6. Remove the new printhead from its package, and then remove its orange protective caps. CAUTION: Do not shake printheads after the caps are removed. Figure 6: Remove the printhead from its packaging, then remove the orange caps from the printhead c00847984.gif
  7. Insert the printhead into its color-coded slot. The label on the printhead must match the label on the printhead latch. Press down firmly on the printhead to ensure proper contact. Figure 7: Insert the printheads in the correct color-coded slots c00847985.gif
  8. Pull the printhead latch all the way forward, and then press down to ensure that the latch is properly engaged. You might have to apply some pressure to engage the latch. Figure 8: Close the latch c00848394.gif
  9. Close the top cover. Figure 9: Close the top cover c00847987.gif
Step three: Align the print heads Whenever you insert or replace a printhead, the printer automatically aligns the printheads to ensure the best print quality. If the printer does not print the alignment page automatically, start the alignment process manually. To start the alignment process manually:
  1. Press the Setup button on the control panel Setup and the number 6 on the keypad or scroll to Tools .
  2. Press 4 on the keypad or scroll to Align Printer . The alignment process starts.

Dec 01, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

3 Answers

Goes threw the motions but not go


Did you try to replace your ink cartridge ????

Mar 26, 2008 | Canon S200 InkJet Printer

1 Answer

Won't print black, won't clean


You should consider that NOT PRINTING a long time (30 days) with a printer can lead to ink drying out in the printhead, clogging the nozzles. If you have some tehnical skills, you can remove the cartridge and desassembly the printhead (where the cartridges are in) and do the following:

Put a paper-tissue on a small plate (like a coffee-cup plate), then put some boiling water on it, just 2~3mm of water over the tissue.
Put the printhead with the nozzles part downside on the tissue, in the hot water.
Let it stay there in the water 30 min.
Put the cartridges back on the printhead (without installing it in the printer), rap it in an other clean tissue, than shake it strongy as if you want to force ink to get out trough the nozzles.
Get the cartridges again out of the printhead, install it in the printer, then install the cartridges again and run a few cleaning processes from the printers maintenance software.

It should work if it's just a clogging of black nozzles.. If you dont have the tehnicall skills needed, Canon gotcha, or you can visit a local specialist to make all this for you, they usualy have better equipmens, as ultrasonic cleaners and special solvents that makes all this easyer.

If it doesn't work after that, then the printhead is dead, and here Canon tertminated you because a printhead is more expensive as the whole printer.
So kiss your printer good bye and get a new one, but at least this time get one that uses cartridges with printhead ON THE CARTRIDGE (like HP and Lexmark) or, if you are in love with Canon, take one that uses the cartridges PGI-5 for black and CLI-8 for color, they also have sepparate printhead from cartridge but it seams they are more durable. And easy to refill, as well!

Hope it helped you in any way!

Rate this solution please. Thx.

Jan 19, 2008 | Canon PIXMA iP1500 InkJet Photo Printer

4 Answers

Kodak EASYSHARE 5300....Problem:


I cannot get the printer to work on the USB cable. I have tried about everything. Seems that the drivers are there but there is something else wrong. Now what?

Nov 26, 2007 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Printer cartridge stalled


Have you put in new ink cartridges?

Get the printer to move the carriage away from the side where it normally rests. Look inside there, and beneath the rest area, sometimes there is a little rubber stamp that presses up against the cartridges. It usually is filled with dry ink. Take a wet paper tower (probably several of them) and try to get as much ink as you can up. Also, there is sometimes a little rubber wiper that cleans the printhead as it passes by. Make sure this is clean also.

Now take the cartridges out. Get another clean paper towel, sopping with water. Press the nozzels down against it, but don't wipe. Just dab them, until you're getting some solid lines of ink on the towel.

Then look for the pattern of copper colored dots on the cartridge. Clean this with alcohol, and then look inside the printer where these dots (contacts) would line up inside the carriage. There will be a smilar pattern of dimples. Clean these with alcohol, and let it dry. 

If possible, you might want to try to fit a towel damp with water beneath the print carriage (where the paper runs through).  This collects a lot of ink sometimes.  Be careful not to force anything.
Finally, put it all back together and try your print.

Thankyou,

Oct 29, 2007 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...