Question about Samsung WEP200 Headset

1 Answer

I tried to connect my emerson 227 bluetooth to my ps3. it tells me to press the start button and enter button on the device at the same time and wait until the screen changes.. well it never changes.. what can i do??

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Pairing the Headset with a Sony Playstation3 Entertainment System:

To pair your [EM-227] Bluetooth Headset with the Sony Playstation3 (PS3), go to the PS3 main menu, scroll to "Settings" and select.

Scroll to "Accessory Settings" and select.

Scroll to "Manage Bluetooth Devices" and select.

The menu will ask: "The Bluetooth device has not been registered. Do you want to register it?"

Select YES.

Put your [EM-227] Bluetooth Headset into discover mode (see X.XX of this manual for instructions on how to get the headset into discover mode).

Select "Start Scanning" from the PS3 menu.

Once the PS3 has discovered the [EM-227] Headset the screen will read "Select the Bluetooth device to register".

Select [EM-227].

The PS3 will ask for a passkey. Enter [0000] then press "OK".

Now press O (the PS3 circle button) to get back to the previous menu.

Scroll to "Audio Device Settings".

Change the "Input Device" to [EM-227].

Note: "Input Device" is the microphone, how others will hear you speak.

By default, the "Output Device" will now switch to [EM-227].

Note: "Output Device" is the audio, how you will hear the PS3 audio and others speaking.

If you would like to hear the PS3 audio and others speaking through your TV or Audio System, scroll to "Output Device" and switch to "System Default Device". If you would like to hear sound through the [EM-227] headset, then leave the "Output Device" setting on [EM-227].

To test your connection, speak into the headset and you will see the bars above the "Microphone Level" moving. If not, repeat the pairing process.

Press "OK" to confirm the new settings. You are now ready to use the [EM-227] Bluetooth Headset with your PS3 Entertainment System.

For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual.

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pairing emerson 227 to a Z797C .. asking for passkey but gives no place to enter it ..


When you say "pairing" do you mean you're trying to connect it to a Bluetooth device to your phone correct?
The default code is 0000 and you enter that on your phone.
Some use 1234
Try the 0000 first
When you're doing the discovery on the phone there should be an area to type in the code. It's not asking for a physical device

Jun 26, 2015 | Computers & Internet

Tip

How do I automatically start Bluetooth?


<p>Bluetooth is a wireless connection method used for two different devices together, like a computer, cell phone, headset or sync. You are required to enter code synchronization when connecting two devices, but most likely you do not want to enter this information each time you want to sync the hardware. Instead, you can automatically start the Bluetooth devices in sync with each other. <br /> <p><br /> <p>1. Turn on the Bluetooth device (such as a headset) and the hardware you want to synchronize with the equipment (such as your computer or mobile phone). <br /> <p><br /> <p>2. Click the "Start" button when using a computer, select "Control Panel" and finally "Hardware and Sound". Select "Bluetooth Devices" and click "Add" and wait for the computer to search for Bluetooth devices. Press "Setup" when using a mobile phone, select "Bluetooth" and activate the configuration. This allows the phone to search for the Bluetooth device. <br /> <p><br /> <p>3. Select the Bluetooth device, once it is detected (both computers and mobile phones) and enter your pair of four-digit code (listed in the user manual of Bluetooth device). <br /> <p><br /> <p>4. Press "OK" on your computer or mobile phone connects to Bluetooth. Now each time the devices are enabled on the phone and the computer automatically detect and connect to Bluetooth devices. <br />

on Jun 26, 2011 | Computers & Internet

1 Answer

I can't connect my Emerson Wireless Bluetooth to my Android Phone. Every time I press "Scan for devices". Nothing pops/shows up. I don't know how to get the Bluetooth to connect to the Android Phone. How...


with the bluetooth on, hold down the round button for about 8 to 10 seconds and the light will start to flash red and blue. That means the headset is in pairing mode. The pass key should be 0000 or 1234.
let me know if that works!
Thanks

Oct 29, 2013 | Emerson EM227 Bluetooth Headset

1 Answer

I cant make a emerson 227 bluetooth work on my ps3?


make sure you did it right first. go to settings- then accessory settings.-manage bluetooth devices-register new device. It is pretty easy from there the ps3 will guide you. If you already tried this and it didnt work then contact me and il give you a different solution.

Jun 29, 2011 | Emerson EM227 Bluetooth Headset

1 Answer

Kindly help me connect my samsung HM1100 bluetooth headset to my playstation 3


1) Go to "Settings" on your PS3.
2) Scroll down and select "Accessory Settings."
3) Select "Manage Bluetooth Devices."
4) Select "Yes" when the message "The Bluetooth device has not been registered. Do you want to register?" is displayed.
5)
Turn on your Bluetooth headset when asked by the message "To register (pair), you will need to prepare the Bluetooth device. For information on preparing the device, check the instructions supplied with the Bluetooth device." While each Bluetooth headset is different, for most this means to hold down the power button until the blue light on the device remains solidly lit.

6)
Select "Start Scanning" once your Bluetooth headset is in "pair" mode. Wait for the PS3 to scan for your Bluetooth headset. If the scan was successful, your Bluetooth headset will be listed on-screen. Select your headset from the list

7) Refer to the Bluetooth headset's instruction manual to find the pass key for your device (Usually the pass key is something simple like "0000" or "1234". Press "X" to bring up the on-screen keyboard and enter the pass key. Select "Enter" then "OK." "Register Completed" will display to confirm a successful connection.
NOTE: If the headset does not display after a scan, it may not be compatible with the PS3, or it is not properly set to "pair" mode. Refer to your Bluetooth headset instruction manual for directions to properly set your device to "pair mode."
If you want to check the User Manual for your Bluetooth, simply click on the following link:
http://www.samsung.com/us/support/downloads/BHM1100NBACSTA Click on the Icon below "File" Thank you.

Mar 04, 2011 | Sony Playstation 3 (PS3) Console

2 Answers

Can't pair to iphone 3g


Hi, the iPhone 3G definitely does work with bluetooth. In fact, I'm talking on a bluetooth headset with my iPhone 3G right now.

You have to put both your Southern Telecom Emerson Bluetooth Headsetand the iPhone in "pairing mode".

On your iPhone, click the Menu button, tap the Settings icon, tap the General icon, and then tap the Bluetooth icon. Make sure that 'Bluetooth' is set to "ON" and not "OFF". As long as you have this screen up, your iPhone is in pairing mode.

Turn your Southern Telecom Emerson Bluetooth Headset off and wait a few seconds. On your Southern Telecom Emerson Bluetooth Headset, press and hold and Answer/End button for Five Seconds, until a solid blue light comes on, which places the device in Bluetooth discoverable mode.

Now that both devices are 'discoverable', the Southern Telecom Emerson Bluetooth Headset will show up on that Bluetooth screen on your iPhone. Be patient as it might take a minute to appear. Tap on the Southern Telecom Emerson Bluetooth Headsetin the list on your iPhone, and then it will ask you for a passkey. The passkey is "0000" (without the quotes). After you enter the passkey, the Southern Telecom Emerson Bluetooth Headset will show up on the list with the word "Paired" next to it.

Now you're paired! Incoming calls will automatically be passed to your headset as long as your iPhone can find it nearby.

Good luck.

Feb 23, 2011 | Southern Telecom Emerson Bluetooth Headset...

1 Answer

I am trying to manage the bluetooth on the ps3 and everytime i click on scan, no matter what i do it stays scanning telling me to wait... i am not understanding why its giving me a hard time and how do i...


hi there,
what are you trying to connect by bluetooth? The ps3 bluetooth will only work with ps3 controller, remote control, keyboard etc... will not connect to other things like mobile phones. If what you are trying to connect is a ps3 device, make sure its turned on when doing the scan. Hope this helps

Jan 19, 2011 | Video Game Consoles & Games

1 Answer

I just bought my madcatz headset from the shop. Charged it for 4 hours and the red LED turned off so I suppose it is charged. Then i go to the “Manage Bluetooth® Devices.” and go to the screen where...


The power button is not the right button to press.

Here is the steps I take:

1. Power on the headset
2. Have PS3 scan for new devices
3. Hit the tiny button that is next to the volume buttons on the top of the headset.
4. PS3 should recognize "8860" and ask for a passkey which is "0000" by default
5. Paired and ready to go

Aug 26, 2010 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

Emerson bluetooth


1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.
2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select (Serched bluetooth device) once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

Dec 14, 2008 | Southern Telecom Emerson Bluetooth Headset...

Not finding what you are looking for?
Samsung WEP200 Headset Logo

836 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Radio Communications Experts

kakima

Level 3 Expert

102366 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...