Question about Lucent Lands Phones

Open Question

Lucent 8434DX - can't get speaker button to stop flashing

My phone was working just fine, but I had to unplug everything to move the cords and the power pack (model S01060a) to go under my desk instead of on the desk. Now the speaker button won't stop flashing, and I've lost my caller ID display. I'm quite sure I plugged everything back into the right (I tried flipping the phone lines and it didn't make a difference). Still get flashing speakerphone light. I unplugged the power supply, no change. I'm sure it's just knowing the right menu buttons to press, I just need some direction (our phone guy is having chemotherapy for several weeks). I answer phones for other staff and need to know who's phone I'm answering!

Help!!

Posted by on

5 Suggested Answers

SOURCE: caller-id quit working

This is a followup to my earlier suggestion. My caller id is working. So, the culprit had to be related to the 9V battery. Just try my earlier solution from 1/20/07. If it works..fine. If not, bye-bye to the phone.

Posted on Feb 10, 2007

SOURCE: Caller ID Stopped Working - Think the phone needs to be reset?

Not sure why this worked, but I went to the Menu and the Set Area Code selection. The area code setting was blank, so I entered my area code and saved it. Caller ID started to work again. As a test, I went back to the Set Area Code selection and deleted the area code and saved it. It is currently still working. Seems really odd, but it worked for me.

Posted on Feb 24, 2008

  • 1 Answer

SOURCE: Caller ID does not work

I FIXED IT!!!  YIPEEE!!

What I did was UNPLUG the base's power unit from the wall... waiting about one minute, and plugged it back in.  That caused it to "reboot" the entire system, and the CID now shows itself.

Posted on Mar 07, 2008

SOURCE: HOW DO YOU SET THE TIME

The time on the phone system has been reset, but you must refresh your system.

1. Press menu button

2. Press the time/day button, which displays current time & day--wait for it to time out (in other words, the screen clears and returns to menu).

3. Press exit.

Repeat steps 2 & 3 to display your clock and check time.

THIS REFRESHES YOUR CLOCK TO THE ACCURATE, CELL-TOWER TIME.

Posted on Oct 23, 2008

Vit Avaya BP
  • 211 Answers

SOURCE: VIEW PREVIOUS CALLER ID LUCENT 6424D+

Closing. User didnot reply

Posted on Mar 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No dial tone?


check power plug at base is plugged in and turned on at power point ( this has happened twice in last two days on my phone base power pack - by others unplugging it)
Check line cord at base unit is plugged in too
base phone not working suggests no power on base and phones battery has gone flat .

Nov 18, 2016 | Lands Phones

1 Answer

Hello..just moved my desk top to new desk..everything is fine..but mouse won t work..while it was unplugged i cleaned keyboard..monitor with soft cloth..can u tell me why my mouse won t work


IF it's a serial mouse (meaning green round connector) it's probably not plugged in correctly. Now these are not plug and play so you need to reboot your system in order for it to work. Try that.

Jul 10, 2011 | E-Machines eMachines Desktop PC

1 Answer

I have a used ultrasonic cleaner model CD3800A, and need operating instructions.


I had a problem with Ultra sonic cleaner Model 3800. It would not turn back on. I found that if I unpluged it and waited 5 seconds it would work again. So if your unit will not turn on just unplug it (wait 5 seconds) and plug it in and see if this solves your problem. Because my unit plugs into a power strip under my desk and was difficult to get at, I put aan inline switch in the power cord.

Good Luck

Feb 09, 2011 | iSonic Ultrasonic Cleaner Model D3800A...

1 Answer

HP compaq 6735s Shuts facing a very weird problem concerning its power. I have left my laptop charging without use for 3-4 days, today I came back home and wanted to use my laptop, I turned it on and...


You need to replace the battery as it has expired.
They are available by typing the battery model number or laptop model number into ebay or Google or indeed any search engine.
Hope that helps.

Nov 19, 2010 | HP Computers & Internet

1 Answer

I have an older phone Bellsouth model 8801 wall/desk mount--the caller idea is not working in the handset--is there a battery component to fix it? Thanks


If it's the cordless version, the called ID is supposed to work off the power cell that came with the phone. If it's the corded version, there should be an access door under the base unit (wall/desk mount).

Oct 09, 2009 | BellSouth Lands Phones

1 Answer

Computer wont turn back on after power outage


Try unplugging the cord from the back of the computer for about 5 minutes and then try it again

Apr 14, 2009 | Compaq Computers & Internet

1 Answer

Static on Cordless Phone after Power Outage


First try plugging the unit in and out a couple of times. If that doesn't fix the problem then check the battery packs on the phone units. BTW I meant to plug and unplug power to the base unit. If these solutions don't work then most probable cause is an audio component failure due to the voltage surge on power up. This is normally when most electronics will fail. Hope this helps.

Mar 27, 2009 | AT&T 2230 Cordless Phone

1 Answer

Won't turn ON


tmilligan,
This is an external burner right? They usually have a power supply and wall plug and don't power up from the USB. To make sure check the drive to see if there is a plug for a power cord on the enclosure back. My money is on that you will need to call some friends to help you move the desk.
randy320sgi

Jan 16, 2009 | Magic INCDRW4048 MagicSpin (INCDRW4048)...

5 Answers

Power Outage & Now Wii Won't Power Up...


When this same thing happened to me, I unplugged the Wii power supply from the wall (not just from the back of the Wii) and let it sit unplugged for about 10 minutes. When I plugged it back in, everything was fine.

Nov 11, 2008 | Nintendo Wii Console

1 Answer

Turning on i guess


It should work OK once you plug it back in. Note there are three places to check the power connection.
- The power pack has to be inserted firmly
- the cord that goes into the power pack
- the cord into the wall - be sure to check the wall outlet with a lamp or something to make sure it's not an overall power problem/breaker, etc.

Steve

Sep 11, 2008 | Lexmark X5470 All-In-One InkJet Printer

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lucent Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

Paul C.

Level 1 Expert

59 Answers

tfelton3

Level 2 Expert

183 Answers

Are you a Lucent Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...