At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Unit plays well but door goes in OPEN position and...
Honestly, when the mechanical parts wear to this extent, you're better off to buy a new CD/DVD player, since they are so much cheaper than repairing older units.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your "timing" is off. Disconnect the door from the trolley and tie down the door latch assembly so it does not engage the trolley. Then using the up down button on opener open or stop the trolley at the closest position you can to the motor assembly. Then open the door to the position it would be when open and note where the latch is at that point. Then loosen the drive and move the trolley to the position noted in former step.- then tighten the chain.
Now hook up the door latch to the relocated trolley and play with the up/down adjustments till you get it right.
I looked at the users manual. I'm assuming single play slot zero is empty, if not unload it. Do you have your manual, if not, google your model number and select the search result 'manualslib.com', it can be found there. Recheck how your discs are programmed to play, sequential, block, etc. What you're seeing could be normal for how the unit is programmed. The disc was seen as being played, even when powered down, so the unit automatically selects the next disc. Some players attempt to read every slot , empty or not. Again, this may be programming. If a disc was loaded into the laser play position, was another disc placed in that tray position? Your unit has a wide range of programming/ listening functions, over time is could accidentally be programmed to other than what you are used to. Last resort is profession service. Good luck.
It is possible to adjust the door however you need to be sure that there is no play in the hinges. Open the door and look at the latch and striker (where the latch goes against). If there is wear on either part then the hinges are probably worn. Lift up on the door and check for excessive play. If play is present the hinges should be checked and replaced if necessary. You may be able to adjust the door to the correct position if there is little to no wear in the hinges. The hinge attaching bolts need to be loosened but left snug. A floor jack with padding can be installed under the door for support. Move the door to the desired position and retighten the bolts. It may tke several tries before you get in right. It helps to make the hinges before moving them so that you have a refernce point. Good luck.
I push the VHS Cartridge in, it drops down to the play position, the front door opens, the tape comes out, it goes around the chrome wheel that is spinning, but it will not play, will not rewind, will not fast forward. It then shows "Error" and the machine shuts off, with the tape still around the chrome wheel, When I turn the machine back on, the VHS Cartridge ejects from the machine. This machine has been used very little, I loaned it to my Son In Law and it came back with the VHS Tape Deck not playing. I have the machine open, so I can see what it is doing.
This model has a belt used for loading the cd mech, after you push play if the belt is slipping or gone,the door will open, if you take the cabinet off eith power off and traopen, look at cd mech you see a belt, it may be loose or gone
you posted 2 different problems here... to answer this one ". The tape is stuck, won't eject and I'd like to get it out without damaging the VCR unit."...open unit, find motor that moves tape ejector and spin that motor by hand (power off)
the other problem, "the VCR will not insert a tape. It keeps rejecting it."...open unit and fully turn ejection motor until home position is reached...this is a home sensor switch not being activated.
power on, open disc tray.
On the machine, press and hold the record button and add another finger to hold the Play (x1.3) for 5-10 seconds. The door should stay open. The rating will change to 8.
Make sure the dial that you turn to start the dishwasher is all the way to the beginning. Sometimes my little grandson comes by and plays with it, turning it. I load, add soap and the dispenser won't close. I check the outside dial, and sure enough, set it to the very beginning and the dispenser locks in place!
It is called the slider assy. The slider moves the laser assy back to home or start position. It is a small belt underneath or there is gunk or hair in the gear mechanism. A very common problem with CD/DVD players/recorders. Very good though that you saw it was not comming back to home place. I wish I had a manual to assist you but I do not. Im telling you the most common problems with the slider mechanism. Good Lck
×