Question about Samsung SyncMaster 920NW Monitor

1 Answer

Screen wont stay on even though power light is on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Posted on Oct 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

H730 wont stay powered on to pair with my phone. It will say connect in the bluetooth settings, but then it goes off n the blue light is not on


Has anything changed with your phone's software? Have you tried deleting and repairing headset?

If you open the boom and long press the multifunction button does the headset light glow steady blue?

Mark
Motorola Support

Sep 04, 2014 | Motorola Mobility H730 - Headset ...

1 Answer

Phone screen stays black


try to press the home button screen while powering up
or try to connect to pc

Jan 10, 2014 | ZTE Warp - 4gb - Black boost Mobile...

1 Answer

Screen stays black


There is few reason. Either your one of RAM is defective. Try both memory one by one. Even though if U don't see screen than its time to change motherboard.

Jul 21, 2009 | HP Pavilion dv9700t Notebook PC

1 Answer

Acer aspire 1640 wont boot up


TRY TAKING YOUR BATTERY OUT FOR 15 MINUTES THEN PUTTING IT BACK IN. IF IT COMES BACK ON, RECALIBRATE YOUR BATTERY BY LETTING THE BATTERY GO DOWN TO 5% THEN PLUG THE POWER CORD IN. YOUR BATTERY MAY NOT BE STRONG ENOUGH TO TURN THE SCREEN ON, EVEN THOUGH YOUR BATTERY METER SHOWS IT HAS A GOOD CHARGE. QUICK CHARGES OR FREQUENTLY UNPLUGGING IT CAUSES THE BATTERY METER TO READ DIFFERENT THAN THE AMOUNT OF CNARGE THE BATTERY IS ACTUALLY HOLDING. RECALIBRATING IT WILL GET THE METER AND THE BATTERY BACK ON THE SAME CYCLE.

Jun 08, 2009 | Acer Aspire 1642WLMi Notebook

1 Answer

Wont stay on


You may have a dead or shorted Cmos Battery, check battery under keyboard, with a meter

Apr 06, 2008 | Dell Latitude D510 Notebook

1 Answer

Wont Work!! Please Help:)


I have no doubt in my mind that your router is defective. If you recently purchasesd it, Retrun it for a new one, you can also return it to linksys for an exchanged one.

Apr 03, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

Tv repair (magnavox)


What makes you think its the flyback/ Most likely its something in the start up circuitry voltage regulator or Horizontal output transistor.What model do you have?

Feb 24, 2008 | Tvone TV-207 Television

1 Answer

Emachines 1900+ gets power to the monitor and computer but wont boot


Buy a dianostics card, and find out if its the RAM, CPU, OR Motherboard. (sounds like a ram or CPU problem though) if you have more than one stick of ram in the system, take one out, and power it up, if still not response, to the other stick out, and put the stick you took out the first time, and put it back in.

Aug 03, 2006 | E-Machines eMachines Refurbished EMA...

Not finding what you are looking for?
Samsung SyncMaster 920NW Monitor Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...