Question about Computers & Internet

1 Answer

I can't find my modern detect to set up internet

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 570 Answers

1
Run the modem diagnostic tool. To do this, click "Start" and then select "Control Panel."

2
Select "Printers and Other Hardware" and then click "Phone and Modem Options."

3
Click the "Modems" tab, highlight the modem you would like to run the diagnostic test on and then click "Properties."

4
Go to the "Diagnostics" tab and click "Query Modem." Look for lines that read "Interpreted Response: OK" to indicate healthy modem functions. Proceed to Step 5 if you have further issues.

5
Go to the General tab and read the status of the modem. It should read "The device is working properly." If not, click "Troubleshoot" and follow the prompts to diagnose and repair the problem.

Thanks.
Have a great day.

Posted on Oct 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When browsing internet appears connection not available / unable to perform operation


Thanks for your question. Listen bro the internet connection there are many types. Such as prepaid, broadband and now the modern connection is wi fi connection which is also known 3g. if you use the prepaid or postpaid connection then first you need to contract with your mobile operator. they can configure your internet setting in your mobile set. but it is not possible to use wi fi connection from your current hand set because the phone not support it, thans

Oct 13, 2011 | Nokia 5530 XpressMusic Smartphone

1 Answer

Server not found


check the proxy settings and make them auto detect

go to tools -> internet options -> connections -> lan settings -> then mark on auto detect settings.

Apr 29, 2011 | Microsoft Internet Explorer 7

2 Answers

I can log onto facebook but cant get my profile page or messages. This has happened after my pc crashed and everything had to reinstalled. Have I changed some setting? any ideas? Email:...


Make sure you're using the latest version of your web browser. Try turning off any ad blocking or noscripting addons or extensions you may have on. Try using a different browser like Google's Chrome which has good support for modern web pages. This will at least tell you if its a problem with your browser or computer/network. If you're on a school or work network facebook might be blocked.

Mar 14, 2011 | Facebook Social Network

1 Answer

I cannot sign in to yahoo messenger even im using correct accountand password.


Check your Internet Explorer settings by going to Tools>Internet Options>Connections>Settings

Then check Automatically Detect Settings.

Also do this again - Tools>Internet Options>Connections>

Then this time click LAN Settings and check Automatically Detect Settings

Click Apply and then try logging in to Yahoo Messenger again.

Oct 25, 2010 | Yahoo Messenger

1 Answer

Hi why cant i login into my account




Check first if you are inputting the correct password. Next try going in to Messenger>Connection Preference> then Click No Proxies

If this won't work, try No Network Detection instead.

Last resort is to c
heck your Internet Explorer settings by going to Tools>Internet Options>Connections>Settings

Then check Automatically Detect Settings.

Also do this again - Tools>Internet Options>Connections>

Then this time click LAN Settings and check Automatically Detect Settings

Click Apply and then try logging in to Yahoo Messenger again.

Oct 25, 2010 | Yahoo Messenger

2 Answers

I just got a epc smartbook laptop. I thought that I could have internet acess through wifi but my internet explorer keeps saying page cannot be displayed - cannot find server. I am getting a wifi signal...


make sure the internet setting are correct, that they are set to automatically detect settings.
Internet explorer / tools / internet options / connections / at the botom, Lan settings, and tick automatically detect settings

Jul 14, 2010 | Computers & Internet

1 Answer

I am trying to connect netgear router to my modern ATT can you help me out?


RECONFIGURE THE ROUTER:
1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
4. On the basic setting page scroll to the bottom and click on Apply.
5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
6. Click on lan ip setup under advanced.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. Click Apply.
17. Logout of the router.
18. Open up another browser window and try to access internet.

Jun 08, 2010 | NetGear WGT624 Wireless Router

1 Answer

My Modern Warfare 2 Game Wont Let Me Play... Please Help!!!


It could be your router or network settings for your internet. Do you use Port forwarding? The Playstation site tells you all the ports you need to use. Also try putting your playstation in a DMZ.

Mar 09, 2010 | Activision Call of Duty 4 Modern Warfare...

1 Answer

What numbers off the HD do I use to set up the CMOS on the mother board under "User" hard drive?


Use automatic detection if it is available; if not use the following:

Size: Usually set automatically depending on the settings for heads, sectors, and cylinders.


Cylinders: The number of cylinders on hard disk. Should be written on drive.


Heads: Number of heads. Should be written on drive.


Write precompensation: Not much used on modern drives. It was used to accomodate drives that had the same number of sectors per track, including both the inner and outer tracks. On SCSI drives

, set this to -1. On IDE drives, it is not necessary to worry about it as it will be determined automatically.


Landing zone: Used for drives that don’t have auto-parking. All modern drives do, so just set to 0.


Sector: Number of sectors per track. It’s often 17 for MFM drives, and 26 for RLL drives.

Jun 26, 2009 | IBM Computers & Internet

1 Answer

Wireles connection shows connected but cannot open any web page


check your internet settings
for Internet Explorer
1. open browser, click tools menu the select "Internet Options"
2. in Internet Options select "Connections" tab
3. at Connections, click "LAN Settings"
4. at LAN settings "Automatically detect settings" should be mark check
5. click OK to save settings, close Internet Explorer Browser and open it again.

for Firefox Browser
1 open browser click "Options" menu
2. at Options, select "Advance" then select "Network" the click "Settings"
3 Connection Settings, select "Direct Connection" if your computer directly connected to Internet provider otherwise select "Auto Detect Proxy Settings" if your using a Router.
4. click OK to save changes, close youi browser and open it again.

Hope this will help you.

Nov 25, 2008 | NetGear WGT624 Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...