Question about Packard Bell Computers & Internet
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Unplug everything from the motherboard leaving only processor, fan and memory and try to boot up. It will take you to bios screen halt after looking for boot device. If it uses a video card, make sure video card is properly inserted. Then start plugging in hard drive and other devices if system comes up.
Posted on Mar 21, 2007
i have 865gl motherboard . it will not resive display. ram and cpu are a ok. how can soluv this problem
Posted on Feb 04, 2008
SOURCE: please help me
Check ASROCK P4i45GV R5.0 User Manual Page 17 - http://download.asrock.com/manual/P4i45GV%20R5.0.pdf
Note: Check Page 11 for the CLRCMOS0 location on the motherboard. From the picture CLRCMOS0 is number 18. You can locate CLRCMOS0 just below the CMOS Cell Battery.
Turn off the computer and unplug the power cord, then use a jumper cap to short the pins on CLRCMOS0 for 3 seconds. Please remember to remove the jumper cap after clearing the CMOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action.
Posted on Mar 22, 2008
SOURCE: Mac PwerBook G4
go to display setting on your computer change the screen size to 1024x768 keep settings then retart your computer you should be able to see them normally after that
Posted on Oct 06, 2008
Tips for a great answer:
Apr 24, 2012 | Packard Bell Computers & Internet
Feb 10, 2011 | Packard Bell Computers & Internet
Sep 13, 2010 | Packard Bell Packard-Bell Full Page...
Oct 05, 2009 | Packard Bell Computers & Internet
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: