Question about FaxBack Inc NETSATISFACTION (FL1001) for PC

2 Answers

Cannot fax to international number using netsatisfaction

I need to be able to setup netsatisfaction to dial international fax numbers, it seems to not work with the 011 prefix.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The NET SatisFAXtion software uses an editor to decide how to dial, and you can even test the changes you make in that editor. It's called the Validation Editor and you can get to it from either the start menu or the administration tool. There is a rule for international dialing. Perhaps it's been disabled? Check their awesome knowledge base too. Check their knowledge base too for answers. I do have to ask why you just don't call them? Their support team is top notch and has always been very helpful to me.

Posted on Jul 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 326 Answers

The modem will dial any number you give it. Check with your phone company.

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know how to fax from mcf 210c


How to enter Fax mode
Before sending faxes, make sure (Fax) is illuminated in
green. If not, press (Fax) to enter Fax mode. The default
setting is Fax.
How to dial
You can dial in any of the following different ways.
Manual dialing
Press all of the digits of the phone or fax number.
Setup Send
3 - 2 SETUP SEND
Speed-Dialing
Press Search/Speed Dial, #, and then the two digit Speed-Dial
number. (See Storing Speed-Dial numbers on page 5-1.)
Search
You can search for names you have stored in the Speed-Dial
memories. Press Search/Speed Dial and the navigation keys to
search. (See Storing Speed-Dial numbers on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause, and then press Black Start or Color Start to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial one time after five minutes.
If the LCD shows Not Registered when you enter the
Speed-Dial number, a number has not been stored for it.

Color fax transmission
Your MFC can send a color fax to machines that support this feature.
However, color faxes cannot be stored in the memory. When you
send a color fax, the MFC will send it in real time (even if Real Time
TX is set to Off).

Nov 02, 2011 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

I want to fax from new zealand to australia. how about i do it...........


In the setup you should enter your the fax number in the internationally standardised format, i.e.

in accordance with the following strict sequence:

??  The "+" (plus) character (by pressing

key)

??  Your Country Code( "64" for New Zealand)

??  Your local area code minus any leading "0"

??  A space

??  Your number on the local exchange, using spaces to aid readability as appropriate.


1 Press Menu/Set, 0, 3.

2 Enter your fax number (up to 20 characters).

Press Menu/Set.

3 Enter your telephone number (up to 20 characters).

Press Menu/Set. (If the telephone number and fax number are the same, enter the same number again.)

Note

??  You cannot enter a hyphen in the number.

To enter a space press once between numbers.

??  The telephone number you enter is only used for Cover Page features.


4 Use the dial pad to enter your name (up to 20 characters).

Press Menu/Set.

5 Press Stop/Exit.

Note

If the Station ID has already been

programmed, the LCD will ask you to press 1

to make a change or 2 to exit without

changing.

3.Station ID
??²
Now dial the fax number of australia 0061............ and send fax.

Jun 02, 2011 | Brother IntelliFax-2820 Laser Fax

1 Answer

How do I send one fax to multiple receipents?


you need to set up a group to send to. So if the group is always changing this may not help much.

Groups allow you to send the same fax message to multiple numbers (broadcasting). You can store the Groups on your One-Touch keys or SpeedDial locations and then broadcast by pressing a One-Touch key and Fax Start or by pressing Search/Speed Dial, the three digit location and FaxStart. First, you will need to store each fax number you wish to includein your Group as either a One-Touch or Speed Dial number. Then, you can combine these numbers into a group. Finally, you can have up to six Groups, or you can assign up to 131 numbers to one large Group. Each Group uses one One-Touch key or Speed Dial location. To set up a Group, please follow these steps:


1. Press Menu, 2 (Fax), 3 (Set Auto Dial), 3 (Setup Groups).


2. Press the One-Touch key on which you wish to store the Group or pressSearch/Speed Dial followed by the three-digit Speed Dial location where you wish to store the Group. The LCD will read SETUP GROUP:G0 ENTER & SET.

(from the Brother manual)

Nov 18, 2010 | Brother IntelliFax-4100e Fax

1 Answer

HOW TO SEND FAX INTERNATIONALLY


Sending a fax to another county is easy - almost as easy as sending a fax to someone in your own country. The only difference is the phone number that you'll dial.
When sending a fax from one U.S. city to another, you dial a 1, then the area code, then the seven-digit phone number. When sending a fax from the U.S. to another country, you usually dial 011, then the country code, then a city code (which is like an area code), then the phone number. (The phone number isn't necessarily seven digits.) Check out the web site www.HowToCall.info, which will give you the specific country and city codes for the place that you're trying to send a fax to.
Other than figuring out the phone number, faxing internationally is identical to faxing domestically. Fax machines in other countries use the same protocols as ones in the United States, so you should have no difficulty communicating with a foreign fax machine. Older fax machines and noisy overseas phone lines may cause the transmission to take a bit longer than you're used to, but it should get there.
The first time you send a fax to another country, it might be a good idea to listen in as the fax machine dials. On some fax machines, you can press the "Dial" button to hear the dial tone, and dial the number manually. Listen for the ring and fax tone, then press the Start button to send the fax. You might want to do this the first time you send a fax overseas, just to make sure it's working as expected.

Oct 06, 2010 | Office Equipment & Supplies

1 Answer

International Faxing??


you need an international phone service and dialing capability on your phone, the country code for Australia is 61 so you would dial:-

011-61- Y- xxxxxxxx where 011 is international code from USA, 61 is country code Y is area code and xxxxx is fax number.

Just dial the number as sending a local fax

Dec 15, 2009 | HP 1040 Plain Paper Inkjet Fax

1 Answer

How can i download users' manual. I need to get the automatic "9" out of the outgoing fax number.


Hello,

Inserting a dial prefix A dial prefix is a number or group of numbers that are automatically added to the beginning of every fax number you enter at the control panel or from the software. The maximum number of characters for a dial prefix is 50.
The default setting is Off . You might want to turn this setting on and enter a prefix if, for example, you have to dial a number such as 9 to get a telephone line outside of your company telephone system. While this setting is activated, you can dial a fax number without the dial prefix by using manual dial. For instructions, see Using manual dial .
To set the dial prefix
  1. On the all-in-one control panel, press Menu .
  2. Use the < or the > button to select Fax setup , and then press c00597634.gif .
  3. Press the > button once to select Fax Send setup , and then press c00597634.gif .
  4. Use the < or the > button to select Dial Prefix , and then press c00597634.gif .
  5. Use the < or the > button to select On or Off , and then press c00597634.gif .
  6. If you selected On , use the alphanumeric buttons to enter the prefix, and then press c00597634.gif . You can use numbers, pauses, and dialing symbols.
To get the manuals visit the following link:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=135&prodTypeId=18972&prodSeriesId=1140783

Regards,
Nikhil Gedam

Dec 16, 2008 | HP LaserJet 3050 All-In-One Printer

1 Answer

I have a lexmark x4270. Having problem sending fax. Sending local number, it's OK, but sending a different area code, it uses the local area code then the first 7 number of that number. Because someone...


Hi zoaj,

More then likely you have the fax set up to USE A DIALING PREFIX.

Therefore it is automatically doing this, regardless of what you input.

Follow the proceedure below ( which comes directly from the users manual for your printer type ) to change this. Delete the " USE A DIALING PREFIX " information.

once that is done, it will no longer automatically add the prefix for you. :)

I have BOLDED the relevant information below that pertains to this.

Please take a moment to evaluate my solution. Your appropriate rating of my solution would be greatly appreciated.

Thank you,

Using the Fax Setup Utility Use this utility to adjust the fax send and receive settings. When you save these settings, they apply to every fax you send or receive. You can also use this utility to create and edit your speed dial list.
  • Click Start onestep.gif Programs onestep.gif Lexmark 4200 Series onestep.gif Fax Setup Utility.
  • From Lexmark All-In-One Center All-In-One Main Page, click Fax Setup Utility.
  • faxsetu.jpg
The following table describes the Fax Setup Utility tabs:
On this tab:
You can:
Send
  • Enter your name and fax number.
  • Select a maximum send speed and a print quality for outgoing faxes.
  • Choose whether to scan the entire document before dialing the number.
  • Choose whether to use error correction.
  • Select when to print a fax usage report.
  • Select when to print a fax activity report.
Receive
  • Choose whether you want to print a footer (date, time, and page number) on each page.
  • Automatically reduce an incoming fax to fit to the paper size loaded or print it on two sheets of paper.
  • Select whether you want to forward a fax or print it, and then forward it.
Connection/Dialing
  • Select the number of times you want the machine to redial and the time between those attempts if the fax cannot be sent on the first try.
  • Select the phone line format you want to use (Pulse, Touch-tone, Behind a PBX).
  • Enter a dialing prefix.
  • Choose how (manually, if fax tones are detected, or after a certain amount of rings) you want to answer incoming calls.
  • Select a distinctive ring.
Speed Dial
Add to, create, or edit the speed dial list.
Group Speed Dial
Create a group number and name, and then add phone numbers to the group.

Oct 11, 2008 | Lexmark Office Equipment & Supplies

1 Answer

Is there a way to program it to fax to a group of numbers at one time


You can use the "Broadcast " feature to send one fax to up to 112 numbers listed in your speed dial. To set this up:
  1. Insert the original into the ADF.
  2. Press Quick Scan/Reports. The display should show how much memory is available.
  3. Enter the One-Touch or Speed Dial numbers for the recipients you want to send to (one after the other). You can also setup a group dial number.
  4. Press Fax Start. The machine will scan the document into memory and then dial all the numbers you've entered. If any are busy it will attempt to redial.
  5. Press Stop/Exit at any time to cancel the broadcast.
If you need further instruction on how to setup group or speed dial numbers, Brother provides the user manual online.

Hope this helps!

May 15, 2008 | Brother IntelliFAX 1270E Plain Paper Fax

3 Answers

Using a calling card for a long distance fax


It will surely help if you are using a calling card that has a pinless dialing feature where you don't need to dial your pin. I use Onesuite.com calling card and it has that feature and sending a fax through regular fax machine is easier than having to dial your pin midpoint.

Apr 19, 2008 | HP Photosmart 2410 All-In-One InkJet...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top FaxBack Inc Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a FaxBack Inc Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...