Question about Canon PIXMA MP150 All-In-One InkJet Printer

1 Answer

How do i clean mt mp110 waste ink absorber?

Can you please describe how to clean the ink wast absorber on the mp110

many thanks

steve.

Posted by on

  • Anonymous Apr 18, 2009

    my waste ink absorber is full, and this is confusing!!!!!!!!!!!!!!!!!!!!!!!!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 66 Answers

Hi u must go in service mode

  • Turn off the printer

  • Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.

  • Hold the Power Button, release the Resume Button.

  • Not releasing the Power Button, double click “Resume” and release Both Buttons.

  • Click “Resume” for Four times

  • Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
  • Posted on May 29, 2008

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Canon Pixma MP110 display shows code 5B00 waste ink absorber full -canyou advise how to fix this,please? Geoff


    you may need to replace the waste pad for it to work. some printer resetters are available online too... you may try looking fo one

    Feb 02, 2010 | Printers & Copiers

    1 Answer

    My Pixma Mp110 Waste Ink Absorber is almost full - how do I deal with this problem


    Hi


    Thanks for using FixYa. From what you have described it seems that the printer requires resetting the Waste Ink Volume Counter. Kindly follow these step by step instructions to do it:

    1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
    2) Enter NVRAM by pressing <--- or ---> then OK
    3) Enter CMY ink level by pressing <--- or ---> then OK
    4) Select 1 by pressing <--- or ---> then OK
    5) Enter K ink level by pressing ---> then OK
    6) select 1 by pressing <--- or ---> then OK
    7) Press reset ( design: // )




    Please do accept the solution if the issue is resolved or else revert for further assistance.


    Thanks
    Rylee

    Jan 23, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

    1 Answer

    How do I clean the waste ink absorber on a cannon ip90


    We are not advice to clean WASTE INK ABSORBER.
    It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
    The WASTE INK ABSORBER KIT is approx. USD10/pcs

    Nov 24, 2009 | Canon PIXMA iP90 Mobile Printer

    1 Answer

    Canon PIXMA MP110 waste absorber is nearly full


    Hi

    Thanks for using FixYa. Open the cover, move the cartridges to the centre, and then press the pad of absorbent paper towel onto the waste ink pads. You can locate the waste ink pads to the right of the cartridges. This will absorb a lot of ink in the pads and that will remove the warning after you reset the printer waste ink tank counter. You can reset your Canon Printer by following this procedure—

    1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
    2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
    3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
    4) When the on/off lights in green, press the Stop/Reset button 4 times for waste ink counter reset.
    5) Turn off the printer.( it must be turn off) then turn it on again.

    Please do rate the solution and revert for further assistance.

    Thanks
    Rylee

    Sep 11, 2009 | Canon Printers & Copiers

    6 Answers

    Canon pixma MP110 waste ink absorber full


    1 - Turn on the printer
    2 - press MENù SCAN COPY SCAN (it will enter in service mode)
    3 - select TEST MODE
    4 - Select PRINTER TEST in TEST MODE
    5 - Select EPROOM CLEAR
    6 - Select INK COUNT
    7 - Press OK
    8 - Press the STOP/RESET key and then press the ON/OFF key
    9 - Change the waste ink absorber in the printer

    Oct 24, 2008 | Printers & Copiers

    1 Answer

    Waste ink absorber is almost full


    Try this:
    Resetting overflow error code for Printer Canon Pixma MP110
    1. Turn on the printer.
    2. Click Menu, and then Scan, Copy and Scan again. All - entered the service mode.
    3. Select Counter
    4. Click Copy - everything. Waste dropped to zero.
    5. Turn off the printer POWER button.
    Good luck

    Oct 14, 2008 | Canon PIXMA MP150 All-In-One InkJet...

    4 Answers

    Canon iP2000 Waste Ink Absorber - where is it for washing and replacing?


    I found it under my ink cartridges in my Canon iP2000 printer. Trying to losten it for cleaning, it came out in my hand, I washed it and replaced it with a tiny amount of glue. After resetting the program, it is working again.

    Feb 11, 2008 | Canon PIXMA iP2000 InkJet Printer

    2 Answers

    Waste ink tank full


    please help me for repair waste in tank full canon ip3300.

    Nov 01, 2007 | Canon PIXMA iP3300 InkJet Photo Printer

    Not finding what you are looking for?
    Canon PIXMA MP150 All-In-One InkJet Printer Logo

    1,070 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Printers & Copiers Experts

    kakima

    Level 3 Expert

    96627 Answers

    old marine
    old marine

    Level 3 Expert

    1476 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...