We have lost the CD for C200 webcam and unfortunately the system had to be downloaded to start the programme can we donwload in pendrive and load it

HERE YOU GO A LINK TO DRIVER
http://support.creative.com/downloads/download.aspx?nDownloadId=11205 I HOPE IT HELP YOU DONT FORGET TO COMENT A GIVE ME A VOTE

Hi,
The following link will get you what you want. You;ll have to select your operating system (windows 7, vista or xp)

http://www.logitech.com/en-us/435/5865?section=downloads&WT.ac=sc'downloads''dd

Regards
Zahc

If I've helped, please rate me!!

http://www.logitech.com/en-us/405

Drivers available at the above link, just find C200 one

If you are trying to upload the software from a CD try downloading the installation wizard from the website.
Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to check the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type dxdiag in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information
The version will be shown on the 'Systems' tab

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

http://nodevice.com/driver/Webcam_C200/get65028.html

should be exactly what you need

Go to Start->Control Panel->System->Hardware->Device Manager. Here locate your webcam, select it and delete it. Now disconnect the webcam from the laptop. Reboot. Insert the Logitech CD and install the drivers afresh. Reboot. Connect the webcam and allow Windows to detect it and load its drivers. Windows will take a long time to do this. Now configure the Instant manager to use this webcam as default camera. And start using. But before you do that start the webcam program to use this camera to check if it takes the video continuously. I do not see any problems now. Trick with Logitech is to load drivers with the device disconnected.

u can download from www.download.com or microsoft website i think it free but better u go with download.com

for lifecam vx3000
go here
http://www.microsoft.com/hardware/digitalcommunication/downloads/default.mspx
Sergio

no problem there are many links available for your cam.
Click Here To down load

this link will open the download page from that page you can select the right driver as per your camera model no and your OS.

Thanks
iqbal

Hi there....you should be able to find the appropriate drivers here
http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=us,en?selectedcrid=405&selectedcid=281

Good luck!