Question about Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

My modem only shows two lights. the power and ethernet lights, called isp, they found no problems with their connections, checked telo land line, able to get dial up connection, reset modem, unplugged, disconnected power, reset again, ran line directly to outside telephone network interface box outside of house to modem, still nothing, initally after reseting, all lights come on, but only keeps the first two on. Have had Siemens modem for 3 years without any problems,ISP =AT&T Has it seen its better days? Thank you, Ray T.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 97 Answers

Hi,
change your modem from PPPOE connection to Bridge mode make a dialup connection to connect internet.

Posted on Oct 06, 2010

  • ijinnis Nov 25, 2010

    Hi there if you are facing any issue with your computer like Virus, Trojan, system running very slow, IE not working, internet connectivity issues, parental setup, back up, E-mail Configuration.Upgrades from Xp to vista and 7............. Do not get panic. Ijinni is there to help you and solve the issue within less time. We deal with all brands of computers and any kind of issues related to software. Just log on to the website mentioned in the source.


    There are 4 ways to reach us.
    1. Once you open the website just click on the live chat where one of our technicians will be in touch with you.

    2. If you have Skype installed in your machine just add the contact "ijinni.com" (free call).

    3. You can email us at support@ijinni.com.

    4.you can dial us at 1 512 879 3546.

    for any issue you are facing with the computer just think of IJINNI, WE DO THE MAGIC.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magicjack doesn't always work right sometimes the phone works , sometimes I get an error 3002 message when I try to call out.


Actiontech what, they many vast models, and routers, and mix.
what are you exact connections here>
NO PC stated, HP model number, this is HP forum. so.....what?
no OS stated, opr. system , windows WHAT?
No modem models stated.
No ISP service stated,

what ISP, what service,? DSL> must I GUESS that?
My guess is not DSL no land line but it is possible to buy DSL
with Landline, disabled, I did for years.
or cable modem, ? uses COAX ! not 2wire twisted like DSL.
or are you doing the MAGIC jack , with NO COMPUTER owned
yes?
The magic jack does not plugin to any modem ethernet port
ever. its usb.

t

Broadband, high-speed internet, cable internet, DSL - WiFi, Fios fiber. and more , dial up? nah you dont have LAND LINE./


error codes,. the first page in the manual states !
Contact your Internet service provider to verify your modem allows more than one device to access the Internet if you receive error 3002 when trying to use MagicJack Plus. Some modems and modem/routers-in-one may not be compatible for use with MagicJack Plus if multiple devices are connected to your network.

We dont know what ISP you have nor the connection type
cable tv modem, DSL, FIOS what?
nor the modem you have , you never said,

this is far more complex
its not magic at all,
fire walls set wrong
ISP blocks you, at your mixed, router and modem
using the routers, USB port is a FAIL.
if you want great help answer what you have and what is connected
in details.
the MAGIC jack as 3 ways to connect,
USB or ethernet.?

Jun 11, 2017 | HP Computers & Internet

1 Answer

Cannot connect to my Internet. On my 2Wire modem at home, The Power LED light is solid green, the Ethernet LED light is green, the DSL LED light is continually flashing, and there is NO Internet LED...


With the DSL light always flashing, it means that either the ADSL signal (synchronization) does not reach your modem, or your modem cannot 'read' the signal.

You need to determine if the problem is from one of the following places :
  • outside of your house (your land line or ISP equipment) or from the modem;
  • your telephone-cable inside your house or
  • one of your equipment;


Try the following manipulations to determine from where the default comes :

  1. Determine if the problem is in your house or on the land line
    • Unplug each and every equipment which is connected to your telephonic installation (Fax, phones, answering machines etc);
    • Using the shortest telephone cable (RJ11) you possess, plug only your modem to the main telephone jack of your house.
    • If the DSL LED still flashes continuously, the problem is somewhere between your ISP's equipment and your house. You should call them and expose the situation. At this stage, you can't do much else.

  2. Determine if the problem is in your house installation
    If the DSL LED lights up when it is plugged to the main telephone jack, then it is either one of your equipment which is at fault, or the house installation. To pinpoint the problem, do the following :
    • With all the other equipment still unplugged, try the modem on all the other telephone jacks you have around the house.
    • If the DSL flashes continuously on one of the jacks, you will have found the source of your miseries. Depending on your ISP's terms and conditions, you will either have to call them of call for the services of a third-party technician to solve the problem.
    • If the DSL lights up correctly on all the telephone jacks, then your house telephone installation is good. Proceed to the next series of tests.

  3. Determine which equipment is at fault
    • Plus your modem to one telephone jack and wait for the DSL line to light solid.
    • Use a splitter (ADSL filter) to plug the equipments you possess (telephone, fax etc) one by one. Verify each time if the DSL LED is still lit or flashes continuously.
    • If one of the equipment causes the DSL LED to flash, it is that equipment which causes your problem.
    • If every equipment causes the DSL LED to flash, the it is the splitter (ADSL filter) which is causing the problem. You can confirm this hypothesis by testing each and every ADSL filter you have in your possession.
    • Replace any faulty equipment and you should have eliminated the problem.
If nothing of this solves your problem, you won't have any choice but call you ISP. Don't hesitate to tell them all tests you will have done.

May I also make some recommendations :
  1. Use a power surge protector (not a UPS though) to plug your modem to the electric outlet BUT plug it directly to the telephone jack;
  2. Make sure your modem is plugged in as far as possible from UPS, television, etc.;
  3. If possible, don't plug the modem in the same electric outlet as other equipments;
  4. Don't use any telephone extension cable to plug your modem to the telephone jack.

Hope this helps you. Let me know what happens next.

May 11, 2011 | 2wire (1000-000057-000) Modem

2 Answers

I have had problems connecting to internet all weekend (internet - red light), am on now but internet and ethernet green light keep blinking, is this ok.


No because dsl light should be solid green light. You need to contact your ISP to check if there is a problem on the network.

Jul 11, 2010 | Computers & Internet

2 Answers

Only internet light is blinking


According to the user guide, the modem is trying to connect to the isp. If it is continually blinking, check all your cables. Once you are satisfied all cables are properly connect contact the isp to find out if there is an outage in your area and if not they can help you.

May 25, 2010 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

3 Answers

When I try to configure my new WRT54GL router, I get error message: "The router i unable to connect to the internet. Try turning cable modem off and back on again." I've done that again and again. I...


Reset the router for 30 seconds. wait for 1 minute. unplug the power to the router and plug it back in. wait for 1 minute.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Apr 09, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

There is an orange flashing LED internet light on our netgear router


as per your router's manual
the light color is called amber and it means that you router is connected (ethernet cable going to your modem) but you're not getting an ip address from you the ISP, check with your isp after attempting to reset your modem (disconnet power and signal cable from modem wait a few seconds and reattempt to connect modem). if problem persists go ahead and check with the ISP.

Jan 01, 2010 | NetGear WGR614 54Mbps Wireless Router...

1 Answer

Ethernet light flashing


Check your DSL Filters on your house phones or anything connected to the phone line EXCEPT the modem. The modem should not have a filter on it. If this doesnt help I would recommend getting your ISP out to test the line because sometimes the resisitors or hardware in the box goes bad or at the DSLAM.

Jul 20, 2009 | Efficient Networks SpeedStream 5667 Modem

1 Answer

Modem won't connect to internet. OS: WinXP Pro SP 3. ISP: Earthlink DSL. Modem: ZyXEL P-660R-D1 (supplied by Earthlink) connected to computer with ethernet cable. Modem includes double filter for phone...


maybe you have to wait for your provider for them to isolate the problem, it seems that your modem got hit maybe by high surge. ask them to bring a spare modem for isolation.. there is no way for you to isolate the problem coz you've already done the basic....

Jun 19, 2009 | Computers & Internet

1 Answer

Modem only shows two lights; can't connect my PC to the internet!


It sounds like you've lost connect to your ISP. Have you checked with them to make sure you don't have an interruption of service?
If it's not an IOS, work with the ISP support technician to trouble shoot. They may have to replace the modem if they can't isolate the problem.

May 21, 2009 | Siemens SpeedStream Modem (4100) (SS4100)

2 Answers

4100 flashing ethernet light


If the internet light is not on that indicates a prob with your ISP, call them up and arrange a service call. I had a similar prob a few weeks ago and they had to replace the drop to the house from the telephone pole.

Sep 02, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

Not finding what you are looking for?
Siemens SpeedStream Modem (4100) (SS4100) Logo

1,251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

john smith

Level 2 Expert

388 Answers

Are you a Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...