Question about ViewSonic VG800 18" LCD Monitor

1 Answer

Powers on without video - ViewSonic VG800 18" LCD Monitor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 734 Answers

Hi there,

Here's the fast track on troubleshooting. Borrow a friend's monitor ASAP. If the other monitor displays normally, your monitor is probably in serious trouble. If the other monitor powers on with video. It's the vidoe card on your motherboard.

It's a simple exercise but almost noone ever likes either answer.

So, ease up on my rating. 2 thumbs up actually decreases it. If you can't leave 3 or 4 then sort of ignore this solution. I seek out tough questions to answer for free while everyone else is bidding for your answers to easy questions.



Posted on Oct 06, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

HTR6230 turns itself off immediately after turning on power button.Removed all speakers and still have the same issue.

If the problem persists even after disconnecting all wires except power (so without speakers and without any inputs connected), then the receiver has probably internal shortcircuit and needs to be sent to a service for repair.

Oct 03, 2013 | Yamaha HTR6230 Receiver

1 Answer

Ubwarcher07 ... No beeps, but there is not a hard drive with an OS hooked up... will it beep without this? Do I really need the eatx12volt plug plugged in to run? I thought this was "extra power"...

The system will not beep without an OS drive, but it will display a message on the screen indicating it cannot find a working operating system. The extra 12volt connector on the motherboard is for the microprocessor or Intel P4 chip. If your video card requires extra power it will have sockets on the card. If your power supply does not have the extra connectors you can purchase adaptors from, or you can upgrade your power supply. Is it necessary? I would recommend using the extra power connectors since it will help control the current flow producing less heat and damage to your system.

Mar 03, 2011 | ASUS M2N32-SLI Deluxe/Wireless Edition ATX...

2 Answers

No ram beep comes without ram and no display

> No RAM beep comes without RAM.

That is to be expected -- when the motherboard does _NOT_ detect any properly-mounted RAM, the motherboard sounds the "no-RAM" beep.

> and no display

Correct. Without RAM, the computer cannot "paint" anything onto the video screen.

Nov 06, 2010 | Intel D845GVSR Motherboard

1 Answer

How to turn on your ds lite without using the power button

You could try using a pin and slide the little black tab inside the DS where the power button was.

Jul 18, 2010 | Nintendo DS Lite Console

1 Answer

Turning off the child lock on our video without

it appears that you will have to acquire another remote (maybe a cheap universal one) and hold the vcr button for six seconds if that dont work try the power button. everywhere i looked said about the same thing.good luck

Mar 28, 2010 | LG Televison & Video

1 Answer

Jvc mc200 powers up,beeps and shuts down within 2 seconds

have a jvcgr-smx750 . It was working fine but recently I powered it up with battery, without battery and just ac power cable. Both times it does power up and shows the screen for about 2 seconds, beeps, and then shuts off. Please help

Apr 12, 2009 | JVC Video Cameras

1 Answer

HDMI cable

You have to reset the video. power off the button on the back and hold the power on button in the front while you turn it on it the back, hold the power on button in the front and it will reset the video!
Good luck..

Nov 12, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

No Video

Try another power supply. I believe you would have this problem if your 4-pin connector from the power supply is not connected to the board. Of cause, you might have a defective board.

May 22, 2008 | ASUS A8N-E Motherboard

Not finding what you are looking for?
ViewSonic VG800 18" LCD Monitor Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Cindy Wells

Level 3 Expert

5058 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides