Question about Audio Players & Recorders

1 Answer

Reply to your advice

Dear Benimur:

The one crucial part simply was not available and even if it was, the whole repair would have been too expensive. So I've decided to junk it and buy a "new" receiver from a posting on Craigslist. It's a Sony STR DG910, which actually has far more bells and whistles than I need. But it's still "in-the-box" and never used, so I think I'm getting a good deal.

Thanks again for your help.

Posted by on

  • BJanke May 29, 2008

    I have already tried my best to rate your assistance, as well as that of the others. I don't know how to "go back to the link" and rate solutions.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Copy that and congratulations with the Sony STR DG910. I am assuming this posting was prompted by an email from the FixYa. A probable reason was that I requested a review of your posting here. This was your original problem and for some unknown reason(s), your rating/evaluation was not reflected. I would appreciate if you can go back to the link and rate solutions as you seem them fit.

Again congratulations with the Sony and thank you very much for taking the time out and providing an update.

Posted on May 29, 2008

  • Louie  Role
    Louie Role May 29, 2008

    Again thanks. Pls do not bother yourself with this anymore as it would seem to be a system glitch and am sure FixYa would take care of it. Sorry to have troubled you.

    Again thank you and hope to hear from you in the future should you need further info or assistance from any of us here at FixYa with other concerns.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED A DISC DRIVE FOR MY PANASONIC HOME CINEMA SP PT 460


Hi,You are not the only one suffering from this problem...As far as I examine on the related web markets available on this respect, I realized that They don't make replacement for players on a home theater in a box. When one item fails you have to replace the system. Instead of replacing the whole system ,You can buy a new separate "Panasonic blue-ray disc player" unit and connect it directly to your tv and then connect an optical cable from the TV to your home theater. It will be more than likely more expensive to repair than buying a new player .

Take care and please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!

Jun 23, 2011 | Audio Players & Recorders

1 Answer

I have 6 preset DAB stations and want to set more but I have lost my manuel and don't know how to search for other stations. The radio is a small Lowry Dab/FM Radio. It wasn't an expensive one.


You can download your manual for the radio at this link:

http://lowryelectronics.webeden.co.uk/#/gsdab0904/4536733630

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 01, 2011 | Audio Players & Recorders

1 Answer

The spindle connecting the volume control knob to the control itself has broken. Does the whole assembly need to be replaced? I don't have the old spindle.


Do you mean the spindle on the back of the round knob? If this is the case then you simply need a new knob from the manufacures as the bit that fits over the pin coming out of the machine is a one peice moulded item. If you are very nice to customer services at Kenwood, they may send you one for free. Next time be a wee bit more careful not to knock the control knob as it is quite delicate.

IF on the other hand it is the volume spindle couming out of the unit, then yes this is a whole item replacement. This will need to be repaired by either a accredited Kenwood repair agent or a competent repair shop depending on whether this item is still under gaurantee or not.

Mar 15, 2011 | Kenwood KRF-V4060D Receiver

1 Answer

THIS IS A PROBLEM FOR AMPLIFIER TRANSISTOR


I'VE seen this error many times, if you need an actual transistor changed, you will want to visit the local electronics repair shop. Many computer shops may also be able to repair your problems. I would recommend that bringing in physically to a shop would be your best choice. The Denon AVR-1507 7.1 is far too expensive to simply replace for a bad set of resistors, transistor, or capacitor, ensure that you realize this is something that some be seen in person to repair.

Jan 12, 2011 | Denon AVR-1507 Receiver

1 Answer

Display on Denon AV-887 receiver does not show anything anymore...


This is most often caused by a bad power transformer. The power tranformer has several different secondary outputs and one of them is the supply voltage for the display. There are several other things that can also cause this problem, but all of these would require some knowledge of electronic troubleshooting and the proper equipment to test it.

I work at an authorized Denon service center and have repaired many Denon receivers, so I do have hands-on experience with these.

If you have the proper test equipment, like a multi-meter at minimum, I could help you to figure out what is causing your problem. If not, you really should just take it in for service. The model number of your receiver would indicate that it may still be under the manufacturers warranty. It has a 2 year warranty, so you can probably get it repaired for free. If it has been more than 2 years since you made the purchase it would still be worth it to get it repaired. This is a very expensive receiver and even if it needed the power transformer, which is very expensive, it would still be cheaper to pay for a repair than to buy a new one of equal quality. Even the very best electronic equipment breaks down at some time, it is just unfortunate that yours took a turn for the worse this soon.

If I can be of more help feel free to post a reply and ask.

Dave

Sep 07, 2008 | Denon Audio Players & Recorders

1 Answer

I have jammed two Cd's in the same tray by mistake. any advice please


my husband tried to fix it himself but was unable to do it. so he did the next best thing. He took the machine to an approved repair workshop who fixed it within the hour for the princely sum of £65.00. It was a little expensive but it did save getting a divorce!

May 27, 2008 | Audio Players & Recorders

1 Answer

Reply to your advice


well..that's a noble attempt to divert electronics from the landfill. however, parts availability in electronics has about a 2 to 3 year life. so if you find one, it's going to be from someone, like you, that has one around.

May 25, 2008 | Audio Players & Recorders

1 Answer

Problem in Yamaha rx -v 8000


your system goes on auto protect mode. it can be repaired even without the shcematics if this is the only problem.

what particular module is he asking for?

Jul 29, 2007 | Yamaha RX-V800 Receiver

2 Answers

After boot up, My receiver defaults to "Decoder"


Maybe the input select IC is going, but I'd put my money on a bet that it is the main microprocessor going crazy. Get a real repair guy to look at it. It sounds like an expensive repair is in your future. If luck is in your stars then you may just have a power supply voltage that is taking a long time to get up to proper value for what ever reason and fixing that might fix your problem. Either way a trip to the shop is in order. Good luck.

Jan 16, 2007 | Mitsubishi M-VR1000 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98796 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69736 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...