I forgot my password fro cect t898. when I switch on my phone that passwordawas required. Is it possible to delete in the startup?

1234,0000 try both of them

[1] Connect to the console port using terminal emulation parameters (typically 38400, 8, 0, 1, None) [2] Reboot switch (Remove power) [3] Hold down Ctrl U while rebooting --[a] Menu will be displayed [4] Select> [D] Delete file [5] Type startup-config (be sure that this is the ONLY file that you delete - if you delete other files, you[ will have to reload the firmware) [6] Now, you have erased the configuration file and you should be able to reboot and login with the default username and password.

1122 definately work for my sci phone i68 1122 is the default security password

hook it up to pc...open it up (make sure setting are switch from storage / data) and look under hidden files...find the correct file to delete

Hi,

i don't think that is possible, but if you can access the directories where they are stored you might be able to delete all the files...
i'm not experienced enough with that type of phone... but succes...

Hope this is useful, and greetings,
Olivier.

on my sciphone i9+++ the default password was 1122. may be u can unlock ur phone using this password..try it....

Usually 0000 works

It is 1122

Go to Service Center and UNLOCKED YOUR CELL PHONE
Because Cell phone always unlocked with the help of Computer different Devices such as (UFSX TORNADO ) etc


Awais Shahid

Hi,

I am sorry but there is no PC Suite for your phone like with most Chinese phones.