Question about HP LaserJet 1012 Printer

1 Answer

Flashing light I am unable to printI have changed the toner and the red flashing triangle light continues to flash. What should I do?

Posted by on

  • Anonymous Nov 25, 2008

    I have the same problem as tymdawg's. What was the solution?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Here is what HP has on the subject of the triangle light flashing:
Flashing light - c00028322.gif 1 - Attention Light 2 - Ready Light 3 - Go Light Figure 2: Printer light key 1 - Symbol for light off 2 - Symbol for light on 3 - Symbol for light blinking
c00028328.gif Door open, media out, no print cartridge, or media jam

The printer is in an error state that requires operator intervention or help. Check the following:

  • The print cartridge door is completely closed.
  • Media is loaded.
  • The print cartridge is correctly installed in the printer.
  • There is no media jam.

Figure 8: Paper jam c00028328.gif 13.JJ.NT JAM IN TRAY 1

13.JJ.NT JAM IN TRAY X

The Attention LED is blinking. Check paper loading then open and close top cover.

When there is a jam in tray 1, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored.

When there is a jam in tray X, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored. These are the error explanations for just the flashing triangle light, there are many more, but none for just the flashing triangle.

If the light pattern is different let me know (other lights on as well)
-Hope this helps.

Posted on May 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We can not find the manual on our Sharp AL-1631 copier. At first the light (shaped like a Z) came on to the left of the green button and we turned off the machine and now that light is off but a flashing...


The flashing red triangle which should look like a stack of dots is your toner cartridge empty indicator. You will need to replace the toner cartridge with a full one or have your existing one refilled. A manual for this discontinued machine will be difficult to find.
Good Luck and Thank You for using Fixya.
WheatlandServices

Dec 23, 2010 | Sharp AL 1631 Copier

2 Answers

Light with the triangle flashing - printer stopped


That means ATTENTION, you are either out of toner or have a paper jam.

Feb 18, 2010 | HP LaserJet P2015 Printer

1 Answer

My xc 1040 the little triangle keep flashing red and wont let me do anything else


Hello sir; The red triangle indicator light on, it means need toner, just replace toner cartridge shpuld be fine.

Nov 04, 2009 | Xerox Printers & Copiers

2 Answers

Kyocera Ecosys FS 920


There are actually some certain meaning on the red light and green light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.

So what is your printer condition? Better know what is going on your printer so can solve the problem.

YBC (/\)

Mar 24, 2009 | Kyocera FS-920 Laser Printer

1 Answer

Sharp AL-1631 copier. Red flashing triangle no owners manual. Dosn't work. Help


Flashing triangle of dots? for your reference, this is, and always has been, the universal symbol for add toner.
...and here's your manual:

http://www.sharpusa.com/files/cop_man_AL1641CS_1631.pdf

Feb 25, 2009 | Sharp AL 1631 Copier

1 Answer

Flashing light


Change the toner

Jun 23, 2008 | Sharp AL 1631 Copier

3 Answers

Paper feed problem


please check if the rubber roller that pulls the paper inside the machine check if it is clean because after long use this roller becomes so smooth ddue to dust and doesnt take in the paper , first clean it ,wipe with wet towel  try again

Oct 27, 2007 | Xerox 5305 Copier

Not finding what you are looking for?
HP LaserJet 1012 Printer Logo

3,001 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...