posted by mcles on May 28, 2008
I get sound on the fm tuner, unit plays dvd and sends immage to my tv, but I get no sound.
What am I doing wrong?
Comment by mcles, posted on May 29, 2008
Thanks for the input, I already tried that but had no success.
Comment by mcles, posted on May 30, 2008
Thanks for that tip, I'll have a shop replace the chip.
Best Solution
posted on May 28, 2008
Hello,
lets perform special reset function in your home theater.
1= set to stand-by mode
2= press three buttons of "Stand-by, Function & Volume- " all togather.
3= you will see "Cold Reset" message on front display of set.
4= power up and enjoy ;)
lets perform special reset function in your home theater.
1= set to stand-by mode
2= press three buttons of "Stand-by, Function & Volume- " all togather.
3= you will see "Cold Reset" message on front display of set.
4= power up and enjoy ;)
Comment by welcomejee, posted on May 29, 2008
Ok, lets try another way.
On video processor board, there would be Digital-to-Analog convertor IC, its suspected now. its hardware problem n requires skilled person ;)
On video processor board, there would be Digital-to-Analog convertor IC, its suspected now. its hardware problem n requires skilled person ;)
Rating Locked! (?) mcles has rated this solution as Helpful
Suggest a new solution for this problem
Post a New problem for Sony DAV-X1 System
Email this problem
Post a New problem for Sony DAV-X1 System
Email this problem
Can you Help with these Home Theater Systems problems?
Repair Service
Find Home Theater Sys. Repairman Near You:
