Question about Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

I have a Canon Pixma IP4200 and an I Mac. I replaced 3 of the inks (mainly black). It is telling me I have full ink but it is still printing blank pages. I have restarted my computer and turned the printer off and on.

Posted by on

  • arberzon Oct 06, 2010

    This did not work but I cleaned out the nozzles through the printer utility and that did the trick. I never heard the beeping when I turned off the printer. Maybe I did something wrong but I got it working immediately so I didn't care. Thanks.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,993 Answers

Hello,

Reset the printer by performing the below task on your printer:


1, Power off the printer

2, Unplug the printer's power cord, wait 5 seconds then replug the power cord in.

3, Hold the Power button for 6 Beeps

4, Release the Power Button

Let me have a feedback.

Good luck.

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue (CYAN) not printing despite changing ink tank


enough ink b ut not printing at all - blank paper on every time despite noise as if printing

Aug 17, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

Printer always uses large black & runs out, cant isolate other


The BK5 is for black text only. The other black ink is used for shades of black/gray together with the three basic colors in printing color photos. You cannot use it to print black text.

Jul 29, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

Pixma ip4200 willl not print Cyan


I think the problm lies between the ink tank and the printhead. When this passage runs dry, sometimes it takes time for the ink to fill this passage again. Try printing again after a day or two.

Jul 17, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

Won't print black when set for plain paper


Try removing all ink bins except black then you won't have any problems. You should also be able to go into your printer settings and select "Black and White" or "No Color" and it will print ok. Removing the ink trays is the easiest way though.

May 28, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

The black ink will not print on my canon pixma ip4200


printer head problem remove ink put about ten drops of alcohol in where the ink goes in run clean cycle ten times

Mar 29, 2009 | Canon Office Equipment & Supplies

1 Answer

My Pixma stopped printing black.


Have you installed the full software that came with the printer? If so then it would tell you if the black ink had run out.

Start by replacing the ink cartridge. If you can replace the black only then do so, if not then replace the cartridge that contains black (along with the other colors).

It is quite common for the black to run out 1st, which is why many printers feature a separate black cartridge.

If that does not help then get back to me and we can look at some other alternatives.

Oct 05, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

3 Answers

Reset Ink levels for canon mx310


How to reset Canon MX310 printer low ink signal

1. Power off the printer.

2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.

3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.

4. Release power button (the screen should now say 'Service Mode').

5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.

6. Press the power button once, (the orange light should go off).

7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.

8. Press the power button, and wait until printer has shut down.

9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.

10. The page counter is now reset! Enjoy.

Jul 29, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

PIXMA iP4200 dont print black color, ink is full


Call tech support! That's why these people get paid. Sites like this wouldn't need to exist if they did their jobs correctly!

Mar 11, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA iP4200 InkJet Photo Printer Logo

Related Topics:

1,257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...