Question about Biostar G31-M7 TE Motherboard

Open Question

Drivers g31-m7te - Biostar G31-M7 TE Motherboard

Posted by on

  • Jason Sementilli Oct 05, 2010

    Which drivers are you looking for? Audio/Video? LAN?

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10406 Answers

SOURCE: i recently updated my bios

Why do you think that you need to roll-back?
Each BIOS-update typically is 95% the "same" as the previous, so it's strange that the "new" 5% could be causing a problem.
What has stopped working?

Did you use the BIOS-update utility to create a 'backup' of the old BIOS? If so, re-flash with that code.

If not, look at the web-site from where you got the updated BIOS;
perhaps, it also offers back-level versions of the BIOS.
Re-flash your BIOS, with the older code.

Posted on Oct 05, 2010

  • 1288 Answers

SOURCE: Please tell me that the

Difficult to say, the manufacturers don't test every CPU however and the 8500 which is a slightly faster spec is supported. Without wanting to commit myself, I'd personally try it. I think the worse that would happen would be the bios not recognising the cpu and it refusing to boot

Posted on Jan 10, 2011

Testimonial: "It comes tomorrow,so I'll try it in,if it wont work I'll try updating the bios as the websites got a newer vers. of bios for my board.Thanks much W.B."

technical114
  • 1851 Answers

SOURCE: which pins are the power

The requested pins are 15 and 16 at JPANEL1 connector. There is no polarity, since the power switch is a simple button. You can take a look at this picture:
technical114_56.jpg
In case you'd like the full manual, you can download it from this official link in zip format, containing 3 pdf files.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Posted on Jun 04, 2011

nonontech
  • 4737 Answers

SOURCE: G31-is the pwr/ reset/ and LED connected in a

I don't know how to say whether it's horizontal or vertical, but let me explain you with a screenshot.
Look at the below illustration:
nonontech_375.jpg

The power (pwr) connectors should be connected to 16, the Rest to 8 and the Power Led should be connected to 4 and 5 from right i.e. from 16.
Hope this helps.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

Posted on Jun 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

G31-is the pwr/ reset/ and LED connected in a vertical or horizontal position on the G31-M7TE motherboard. I would liked to see the diagram since i do not vave a book to follow how it is done


I don't know how to say whether it's horizontal or vertical, but let me explain you with a screenshot.
Look at the below illustration:
nonontech_375.jpg

The power (pwr) connectors should be connected to 16, the Rest to 8 and the Power Led should be connected to 4 and 5 from right i.e. from 16.
Hope this helps.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

Jun 04, 2011 | Biostar G31-M7 TE Motherboard

1 Answer

Which pins are the power on/off on the G31-m7te motherboard


The requested pins are 15 and 16 at JPANEL1 connector. There is no polarity, since the power switch is a simple button. You can take a look at this picture:
technical114_56.jpg
In case you'd like the full manual, you can download it from this official link in zip format, containing 3 pdf files.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Jun 04, 2011 | Computers & Internet

2 Answers

Where can i find a download for g3i-m7te because i accidentally deleted it


http://www.biostar.com.tw/app/en/support/download.php
I don't know what version of the G31-M7TE you have, they list three at this link, but hopefully this helps you. I don't see anything for Win 7 but They do have Vista and earlier.

Mar 16, 2011 | Biostar G31-M7 TE Motherboard

1 Answer

I cant able to install the intel g31 audio drivers from the motherboard CD


Havhttp://www.intel.com/Products/Desktop/Chipsets/G31/G31-overview.htm
Have a look at this website, it may help. Withchipset installed make sure it's updated.

Mar 04, 2011 | Computers & Internet

1 Answer

Please tell me that the G31-M7te mobo supports the E8400 CPU...I just ordered the cpu and noticed that the E8400 isnt on the motherboards list of cpu's on biostars website...Any help would be appreciated...


Difficult to say, the manufacturers don't test every CPU however and the 8500 which is a slightly faster spec is supported. Without wanting to commit myself, I'd personally try it. I think the worse that would happen would be the bios not recognising the cpu and it refusing to boot

Jan 10, 2011 | Biostar G31-M7 TE Motherboard

1 Answer

I recently updated my bios of mother board g31-m7te,how to roll back to old bios


Why do you think that you need to roll-back?
Each BIOS-update typically is 95% the "same" as the previous, so it's strange that the "new" 5% could be causing a problem.
What has stopped working?

Did you use the BIOS-update utility to create a 'backup' of the old BIOS? If so, re-flash with that code.

If not, look at the web-site from where you got the updated BIOS;
perhaps, it also offers back-level versions of the BIOS.
Re-flash your BIOS, with the older code.

Oct 05, 2010 | Biostar G31-M7 TE Motherboard

1 Answer

I have a biostar motherboard G31-M7TE with XP the instalation disk installs USB 2.0 ok, but now i installed Vista and planning Windows 7 too , but actually with Vista my USB is 1.0, too slow, it...


Access the Windows DEVICE MANAGER.
Select the USB hardware.
Click UPDATE DRIVER, and see if Windows Update can download and provide the correct device-driver to enable USB 2.0 support on your USB 2.0 ports.

Or, try: http://www.biostar.com.tw and see if the updated USB device-driver is posted on their "Support

May 19, 2010 | Biostar G31-M7 TE Motherboard

2 Answers

Motherboard driver for P4M890-M7TE version 7.1 Brandname audio Realtek ALC662


Hello,
You can find all drivers for this motherboard at this website.

Thanks,
Lolita

May 21, 2008 | Computers & Internet

Not finding what you are looking for?
Biostar G31-M7 TE Motherboard Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Biostar Computers & Internet Experts

Jayburt

Level 2 Expert

77 Answers

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Biostar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...