Question about Sharp FO 2950M Plain Paper Laser Fax

Open Question

Keeps turning on and off, display says Wait a Moment

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 48 Answers

SOURCE: Sharp UX-117 display Wait a moment on power on and then no signal

I have not worked on a sharp ux-117 before, however most sharp fax machines are all alike when it comes to resetting this code. Turn the fax on while holding down the stop and start key don't let go until you see 1 =yes, 2=no for memory clear. press 1=yes. Some of the sharp fax machines have a small white rounded reset button. No guarantee but you have nothing to lose.

Posted on May 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the silent mode on a Uniden 6.0 dect phone, so it will ring?


For the Uniden model D1680 & similar...

You ENTER "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Silent Mode ON".

You can EXIT "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Handset #".

Another easy way to end "Silent Mode" is to go
to the BASE and press the [ANS ON/OFF]
button to turn off the answering machine system.
(Push the [ans] button, do not unplug the power)

"Silent Mode" will clear a moment later while the
control voice tells you "Answering System is OFF"
Now you can again turn on the answering machine
system as desired.

Good luck!
------------

Jun 13, 2016 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

How do I turn off the silent mode so the phone will ring?


For the Uniden model D1680 & similar...

You ENTER "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Silent Mode ON".
You can EXIT "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Handset #".

Another easy way to end "Silent Mode" is to go
to the BASE and press the [ANS ON/OFF]
button to turn off the answering machine system.
(Push the [ans] button, do not unplug the power)

"Silent Mode" will clear a moment later while the
control voice tells you "Answering System is OFF"
Now you can again turn on the answering machine
system as desired.

Good luck!
------------

Jun 13, 2016 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Initalising scanner wait a moment


i would strongly recommend to delete your printer driver and re installed a new one online.

Apr 17, 2016 | HP Color LaserJet CM6040f MFP Q3939A...

1 Answer

Instrument panal keeps going off


either behind the headlight or under the gas tank inside the frame...

Feb 02, 2014 | Universal Power 2006 Polaris Sportsman 90...

1 Answer

My seat belt sensor keeps going off when I am wearing my seat belt!!


I found this post via genvibe.com, it worked for me on my 07 Vibe:


This will turn off the 1 minute beep if the car is running and either the passenger or the driver takes off their seat belt.

Get in the car and turn the key to on (don't start the car,) then change the odometer to display "odo" and not trip A or B.

Turn the key off.

Turn the key back to on. Within six seconds of doing this, press and hold the odometer button. Do so for 10 seconds. Then, while still holding the button, buckle up, edit: then unbuckle. The "odo" display should then change to say "b-on." let go of the odo button to get it to read "b-off." Then wait for the display to change back to the odometer. That's it, you're done.

The car will still beep right when you turn it on for 3 seconds if you don't have a seatbelt, but the dash light will continue flashing till buckled up. It won't beep if you or your passenger unbuckles for a moment. Salvation!


Read more: http://wiki.answers.com/Q/How_do_you_disable_a_driver's_seat_belt_alarm_on_a_pontiac_vibe#ixzz1MxTn2Oa0

May 21, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

MEMORY FULL ON SHARP UX-460


In addition to clearing memory this *will reset unit to factory defaults.
*****all of your programmed settings will be erased.



First power down the fax by unplugging, then power on.

After the power is turned on and "WAIT A MOMENT" is displayed, press & hold the STOP key.....until a normal display message shows.


*The above step allows the memory to be cleared! If this step is skipped clearing memory to factory defaults, (below) may not always work.


Press the "function" key followed by ALL of the following

9 * 8 # 7

wait until "diag mode" is showing.

Then press start button, followed by either * or #
until "memory clear" message is displayed.

then press start. If stressful "memory cleared" is shown.
proceed to re-program your fax machine settings.

Oct 20, 2010 | Office Equipment & Supplies

1 Answer

Have 1-min on the digital display. wait 15


It sounds like you have a restriction going to the pump.You have a filter which needs to be cleaned.

Nov 10, 2009 | Whirlpool GHW9100L Front Load Washer

2 Answers

Caller ID on samsung F480 doesn't display


I just called my service provider and they were able to fix it. Just gotta wait 4hrs then turn it off, wait a few seconds then turn it on. heaps quick they knew what i was talking about straight away

May 16, 2009 | Cell Phones

1 Answer

Sharp UX-117 display Wait a moment on power on and then no signal


I have not worked on a sharp ux-117 before, however most sharp fax machines are all alike when it comes to resetting this code. Turn the fax on while holding down the stop and start key don't let go until you see 1 =yes, 2=no for memory clear. press 1=yes. Some of the sharp fax machines have a small white rounded reset button. No guarantee but you have nothing to lose.

Dec 03, 2008 | Sharp UX B700 Plain Paper Inkjet Fax

1 Answer

Sharp FO 5700 - Please Wait For A Moment message


Hold down the stop and start key while turning on the fax, let go when you see 1 for yes 2 for no for memory clear. Press 1.

Sep 08, 2008 | Sharp FO 5700 Plain Paper Laser Fax

Not finding what you are looking for?
Sharp FO 2950M Plain Paper Laser Fax Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...