Question about ASUS WL-330 802.11b Wireless Access Point

1 Answer

I am looking for the software that came with the WL330 (not WL330g) which selects an SSID and sets up passwords so that I can move my WL330 to a new laptop.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 108 Answers

You can visit the above website which will display the image of your portable wireless router. Click on Downloads. Select the operating system on your computer and you may find all that you need.

But, I also have a better web page to help you out for any issues you may face in future along with the relevant answers.

In this website you may find couple of technical FAQs and on the left side column, you may find downloadables which you required.

For further clarifications, please do revert!
Thanks for asking.

Arvind S Iyer

Posted on Oct 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do i enter new network name and password

If you are having problems accessing, visit Router login page cannot be displayed or is blank.
  1. Enter the router user name and password when prompted. ...
  2. Click OK. ...
  3. Select Wireless.
  4. Enter your new user name in the Name (SSID) field.
  5. Enter your new password in the Password (Network Key) fields.

Oct 27, 2016 | Computers & Internet

1 Answer

Go to your NETWORK screen and touch your old router SSID (Name) and select FORGET.

If that is not available select RESCAN.

Now look for new router SSID and input new router KEY when it asks for Password.

Nov 24, 2013 | Amazon Kindle Fire HD

1 Answer

Cannot get the internet to work

That means you probably don't have the password or the Authentication Type set correctly.

For Windows XP below:
Click Start/Control Panel/Network Connections then Right Click on the Wireless Network Connection and select Properties. When the Properties window open click the Wireless Networks tab. Click on the SSID for your wireless network that you connect to and the Properties window will open. You can change the Authentication Type to match the type set in your wireless router and you can also change your password or Network Key to make sure you have it in correctly.

For Windows Vista below:

Click Start/Control Panel/Network and Sharing Center then look to the left of the open window and click Manage Wireless Networks. Find the SSID of the network that you connect to and double click it. When the window opens click the Security tab to change the Security Type (which is the Authentication), The Encryption Type and the Network Security Key (which is the password).

For Windows 7 below:
Click Start/Control Panel/Network and Internet/Network and Sharing Center then look to the left and select Manage Wireless Networks. Find the SSID of the network that you connect to and double click it. When the window opens click the Security tab to change the Security Type (which is the Authentication), The Encryption Type and the Network Security Key (which is the password).

May 08, 2012 | Computers & Internet

2 Answers

I need a wep password for my belkin wireless router how do i do this

Follow this instructions:1. connect via hard wired connection (network cable)2. open your internet explorer or any browser.3. type the numbers on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select saveand apply.then try to restart you tablet and search for new wireless networks, select your SSID or wifi's name, it will ask you to enter your passcode, enter the password you created under instruction #8 then select ok. then you are good to go.

Dec 25, 2011 | Belkin Basic Wireless Router

1 Answer

How to set router password

Make sure that you are connected via ethernet cable or hard wired connection:
1. Open a browser ( internet explorer, mozilla firefox,google chrome or safari)2. Delete all of the characters in the address bar3. Type the numbers Press enter.5. You will be able to view the modem settings page.6. Select Basic Setup or the second tab with the word interface.7. Select Wireless Setup8. Enter the SSID or (service set ID), this will be your wifi name.9. Select WEP or WPA for your router's wi-fi password.10. Select ASCII for the passworrd.11. Enter any password ( around 10 alpha numeric characters to make sure that it is a strong password)**alpha numeric means combination of letters and numbers.12. Select Save or Apply.13. Disconnect the network cable for you to test the Wireless password connection.14. Scan for new wireless network on the lower left hand of your computer's screen.15. Look for the wireless name that you entered for your SSID.16. Connect and it will ask you for the wireless / pre-shared key17. Enter the WPA password that you created ( the 10 letters and numbers that you entered for ASCII)18. Press connect.
there you go... you will be connected to your router via wireless with password protection. No one can connect to your router unless you gave them your PSK or wi-fi pre-shared key.

Dec 24, 2011 | Linksys Computers & Internet

1 Answer

Had to reset router, now i can't find my ssid name and it's unsecure.

Well, on a computer with an Ethernet connection, go to Start > Run and in the Run window type in CMD (in Vista and Win 7 just type CMD into the search bar). In the command prompt type Ipconfig /all and press enter, you're looking for your default gateway (that is your router) right down that IP address. Now open up internet explorer and type that IP address into the browser bar. This will bring up the login window for your router. Your username will be blank (since you reset it), but you'll have a password of admin type that in and hit enter. Now you are in the setup of your router. Click on the Wireless tab, set Wireless Network Mode to Mixed, make up an SSID (this will be the name of your network), make sure your Channel is set to 6, and you can also turn off SSID broadcast (if you do that, people will need to know the exact name of your network, or your SSID rather, in order to connect to it). The choice is yours. Anyhow, now select Save Settings at the bottom. Now click on the Wireless Security tab. Select your security settings (I strongly suggest you use WPA2 Personal) turn WPA Algorithims to TKIP+AES. Enter a WPA Shared Key (this is your passwrod for wireless devices to connect to your network) you should probably make it complicated and then write it down along with your SSID name if you turned off SSID Broadcast and save the paper somewhere safe. Leave the Group Key Renewal at 3600sec. Select Save Settings at the bottom of the page. In the Administration Tab you can set up a password for your router so it is no longer the default password of admin that everyone knows. Up to you, but if you do set a password make sure you write it down on the piece of paper with your SSID and Shared Key and store it somewhere safe and press Save Settings at the bottom of the screen. You will then be prompted with the login window again and now you must enter your new password. Once all of that is done, close the window. Now you have to go to your Wireless computers/devices and set them up with your new login information, if you did not disable SSID Broadcast then simply look for the name of your network and enter your Preshared Key and then you will connect. If you did disable it then you need to set up a new wireless connection that will be named the same name as the SSID you entered in your router, it will have WPA security (pick TKIP or AES) and you will have to enter the Preshared Key and you will connect.
Hope this helps!

Dec 15, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

Access point configuration

Access is easy to configure, you just need to understand basic setup you need to do and just have to find the same options on the configuration page of any wireless access point.

Things to setup.
1. Local IP Address ( You will get default according to your device guide, still you can set different (not recommended, if not expert) )

2. Setup WAN IP-This could be dial up connection (PPPOE) or Internet IP Address provided by your internet provider.

3. Setup Wireless access point SSID, this is what you will find when you scan for wireless connection available

4. Setup security settings. You can setup WPA or WAP to protect security. Just need to select and assign key/password which you will be asked while connecting SSID

Follow the link for exact information on how to setup your Access Point,review-233-3.html

Hope this helps

Jun 02, 2010 | ASUS WL-330G 802.11g/b (wl330g) Wireless...

1 Answer

I have a new laptop and installed the driver for my lexmark z2420 from the web. I don't have the original disk where it setup the WPA security password for my wireless network at home. I don't see that...

Go back to Lexmark's web-site, and look for "other" software for your printer.

Or, from the controls on the printer, you should be able to select "encryption" and then "WPA", and then select your network's SSID, and then enter the password.

Jan 02, 2010 | Lexmark Z2420 Printer

1 Answer

How do i do a wireless connection between computer and a kodac 5100 all in one printer
follow this manual ...
  1. Check the Wi-Fi Status Indicator on the front of the printer:
  2. Status: Do the following: Off
    1. Select Menu (or Home)>Network Settings and press OK.
    2. Select Turn Wi-Fi Radio On and press OK.
    3. Select Wi-Fi Setup Wizard and press OK.
    4. Select the SSID (name) for your router.
    5. If you have your network secured, you must also enter your password.
    1. Select Menu (or Home)>Network Settings and press OK.
    2. Select Wi-Fi Setup Wizard and press OK.
    3. Select the SSID (name) for your router.
    4. If you have your network secured, you must also enter your password.
    5. NOTE: If the message Your printer is already configured for Wi-Fi network appears, your printer cannot find your router.
    6. If this occurs, check that the router is turned on and located within 100 ft (approximately 30 m) of the printer.
    On The WiFi Status Indicator could be on, but you could be connected to the wrong router if you used the manufacturer's default SSID and password when you set up your router. If this is the case:
    1. Select Menu (or Home)>Network Settings and press OK.
    2. Select Wi-Fi Setup Wizard and press OK.
    3. Select the SSID (name) for your router.
    4. If you have your network secured, you must also enter your password.
  3. Select Menu (or Home) from the printer control panel on the front of your printer.
  4. Select Network Settings and press OK.
  5. Select View Network Configuration and press OK.
Place the KODAK All-in-One Printer Software CD into the CD-ROM drive on your computer.
Follow the on-screen instructions. Do one of the following depending on the version of KODAK All-in-One Home Center Software:
  • When the KODAK Printer Setup Utility screen appears, select how you want your printer to be connected:
    • USB cable
    • Wireless Wi-Fi® connection
    • Ethernet cable

Oct 12, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

How to hook up a netgear rangemax wireless router WPN824

  • connect it based on the manual
  • Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}
    • set first the routers access page
    • type
    • type username: admin, password: password
    • on basic settings: select no internet login: set the router mac address to set to computer mac address, apply
    • click: wireless settings under set-up: change: SSID: <your name>, region: US, mode: g&B, channel: 11, no password first, click apply
    • goto xbox system-network- then look for the ssid of your router and connect, if you encounter any problem call xbox live support

Aug 05, 2009 | NetGear RangeMax WPN824 Wireless Router

Not finding what you are looking for?
ASUS WL-330 802.11b Wireless Access Point Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides