Question about HP DeskJet 920c InkJet Printer

1 Answer

How to change the cartrige - HP DeskJet 920c InkJet Printer

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,932 Answers


1.Out tray (in down position)

2. press Power button

3. open top cover

4. raise cradle latch

5. lift out cartridge

6.Remove the replacement print cartridge from its packaging and carefully

remove the protective vinyl tape.

7.Insert the print cartridge firmly into the cradle. Secure the cradle latch.

You hear a click when the latch is fully secured.

8. Close the top cover.

If the Print Cartridge Status light continues to blink after installing a new

print cartridge, check the part number on the cartridge to verify that the

correct cartridge is installed.

9. Align the print cartridges for optimum print to change the cartrige - d453c35.jpg

Thank You

Posted on Oct 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Eroor ink out ebson t1100 series

If your cartrige is origanal, Please change that cartrige which show cross sign on your monitor,
If not, Please try to clean the cartrige's connector. ( for CIS)
Thank you

Jun 01, 2013 | Office Equipment & Supplies

1 Answer

My friend had a problem of his printer, cause the printer didnt recognize the ink... it has 6 colors epson ink. we dont know how to fix it... all the cartrige shows x

Is your friend use CISS. If so
Move Ink cartrige holder to cartrige change station.
Put off cartrige ( genuin or CISS) from carrage
Take a soft erager try to remove dry in or dust or waste everything smothly
reassemble the cartrige again
push top of the cartrige gentaly sothat it struck acurately.
Turn on printer.
I think you will get rid from your pprinter problem.
Thank you

Aug 21, 2011 | Office Equipment & Supplies

1 Answer

My Lexmark Z2300 does not recognize my new printer cartridge. What can I do??

Jast bring the cartrige holder on cartrige changing place and wep the connector (which are situated in the front wall on the carier) with the soft tissue paper. and install the new cartrige.
I thing it remain work again.
Thank you

Jan 12, 2011 | Lexmark Z2300 InkJet Printer

1 Answer

Check right cartrige

change the cartridge if you still face an issue,Your printer hardware has malfunctioned,you may or may not like this idea.
you can clean the contacts on the cartridge, then cleant the contacts inside the printer where the cartridges lay,if you still face the problem,call into hp at 1800-474-6836 and see if they can offer you an upgrade with a 50% discount or a new printer for just $130 which is wireless and usb capable.

Aug 11, 2009 | HP Officejet 6310 All-In-One InkJet...

2 Answers

Epson rx595 changed to cartriges everthing fine

Try cleaninig the ink before reinstalling it again,if problem pesist,clean the surface contact on the printer and put back the ink,if pops up again,replace the ink.

Jul 13, 2009 | Epson Stylus CX6000 All-In-One InkJet...

1 Answer

Husky Grease gun h4424 not working right

It sounds like you are getting air in the grease, anyway that happens to me sometimes when I don't have it full of grease where the cartrige screws in (and i change cartriges). Try it with the part where the cartrige screws on clear full of grease & top of cartrige with grease on it. See if that works. Rick

Apr 10, 2009 | Air Tools & Compressors

1 Answer

Changing cartridge

Just above where you feed the paper there is a door - open it, wait for the ink cartriges to stop moving, to your right - remove and replace in the same way the cartrige you're replacing.

Jan 09, 2009 | HP Photosmart 4180 All-in-One Printer

2 Answers

450c color problem

The 430 ID is B/W, you need to load the 450C driver to get color, renaming the driver isn't enough.

Oct 13, 2008 | HP DesignJet 450c InkJet Printer

Not finding what you are looking for?
HP DeskJet 920c InkJet Printer Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides