Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset
I have a brand new Uniden Dect 3080 Series phone. It runs on the 1.9Ghz band, and should not receive interference in my house from my wireless macbook pro, or my bluetooth devices.
Periodically during a call, when I am within 30' of the base, it will stop communicating with the base and say "out of range" on the screen. Walking right up to the base does not reconnect the call right away. Suddenly the call is "dropped" to my caller, and they hang up.
I have been unable to find a solution. My phone base is in the kitchen 10' from the nearest appliance, and not near any other wireless units for 20'
I have an apple wireless mouse, and a cell phone, but I cannot connect consistent interference problems to their concurrent use.
Any suggestions would be helpful.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Normally TWO NOISE FILTERS comes with net packs (modems and netlines instalations from the companies by default). One of them, we swich to the phone line, separating Data and Audio tranfers. [the outside cable goes directly to the router and the filter is connected between the box in the wall and the phone cable(preferred one), or between the cable and the phone].
If you don't have it, ask to a Phone Company, that's is real chip and helps a lot to whom shares phone and internet in one line [ ...as me too...beside...as almost everybody :-) ]
Posted on Jan 19, 2008
I had a similar problem which I finally fixed. You did not say if any of your phones registered.
First try the following recommended by Uniden Support:
Your phone(s) should be fully charged before putting them on the main base.
Unplug the battery from the phone by removing the battery cover and removing the connector. Then, push the # and * key together and hold while you plug the battery back in (requires some dexterity). Continue to hold the two keys until you hear a confirmation tone. This will force the phone to reregister. Put the phone on the main base (if you are sure it has a fully charged battery) and see if it will reregister it to solve the problem.
That did not work for me. So, I followed the instructions to de-register the handset (even though it hadn't really registered). But, I also pretended like the Base was not available (because using the base in this step also failed).
1) Press and hold the hang up and # keys for at least 5 seconds.
2) Move the cursor to select Base Unavailable and then press Select.
3) Select the base you want to deregister from, press Select and then move the cursor to Yes and select.
This causes the phone to delete any of its base information.
At this point, again insure that your phone shows the battery is fully charged and if it is not, put it on the stand alone charger base (not the main base). With the battery fully charged, place it on the base and try registering again by placing it in the main base.
If neither of these approaches help, contact support at Uniden.com.
However, my problems were cleared when I cleared the handset with the second set of instructions.
Posted on Apr 26, 2009
i have a uniden 5.8 ghz cordeless and thought it was a piece of junk as well. I had static or lapse of audio near the router, the kitchen sink, the microwave (even when off) and in the doorway. I switched the frequency on the router and changed the channels on the phones all with no luck. Short of steering clear of my entire downstairs nothing worked.
Just about ready to buy a new phone and hit up google. Saw a posting that said to keep the base away from even the tv. . .hmmm this is exactly where mine was located. So I swapped the digital answering machine base and moved it downstairs and put the additional base near my flat screen. Guess what? Problem SOLVED! I still cannot believe it.
Hope this helps
Posted on Aug 07, 2009
Tips for a great answer:
Nov 23, 2015 | Uniden Lands Phones
Jan 11, 2014 | Uniden DECT 6.0 Cordless Telephone...
Jan 11, 2013 | Uniden DECT 6.0 Cordless Phone ID
Sep 28, 2011 | Lands Phones
Sep 28, 2011 | Uniden DECT3080-3 Trio Cordless Phone
Jul 27, 2010 | Uniden DECT 6.0 Cordless Telephone...
Mar 12, 2010 | Uniden DECT-2088-2 1.9 GHz Twin 1-Line...
May 22, 2009 | Uniden DECT 6.0 Cordless Telephone...
Aug 30, 2008 | Uniden DECT 6.0 Cordless Telephone...
Oct 08, 2016 | Uniden DECT 6.0 Cordless Telephone...
215 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: