Question about IBM Infoprint Color 1454 Laser Printer
Hello, I have an IBM Infoprint Color 1754 printer and get following error: > Service printhead error 107.10> How can I solve this problem ?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Go Here: it's a PDF file which explains how to reset the printer's maintenance count.
Posted on May 15, 2008
The error is Fuser cam position not found. Have you tried reseating the fuser? Does the fuser make any loud sounds? Based on the error message, it could either be the fuser, or the system board.
Posted on Jul 24, 2009
SOURCE: Ibm infoprint reseter
Here is a procedure I would like you to do to reset the light:
1-Power the printer on and get it to the Ready state (i.e. the light on the operator panel is on)
2-With the printer on and in the Ready state, open the front cover
3-Press and hold the Cancel button until all of the lights begin flashing up and down.
4-Release the Cancel button and close the door. The photoconductor count should now be reset
To confirm that the photoconductor page count has been reset, it is recommended that you print a
menu settings page and check the photoconductor level. Do the following:
1.With the printer at the Ready status, press the Continue button once. The Ready
light will begin flashing and one or two pages will print out.
2. Look for a section labeled Cartridge Information and locate the word Photoconductor
under this heading.
3. Confirm that the photoconductor level reading is either OK or close to 100%.
4. If the reading is low, try printing 10 - 20 pages.
5. Print the menu settings page(s) again.
6. Confirm that the photoconductor level reading is OK or close to 100%.
7. If the photoconductor reading is still low, there is a second, more detailed, procedure you
can perform to reset the count.
8. If the reading is still low after both procedures have been attempted, the printer may require service
Posted on Feb 05, 2010
Tips for a great answer:
Apr 29, 2014 | Lexmark Office Equipment & Supplies
Mar 03, 2010 | IBM Infoprint 1352 Laser Printer
Dec 24, 2009 | IBM Infoprint 1422 Laser Printer
Jul 21, 2009 | IBM Infoprint 1572 Laser Printer
Apr 08, 2009 | IBM Infoprint 1116 Laser Printer
Feb 06, 2009 | IBM Infoprint 1352 Laser Printer
Jan 21, 2009 | IBM Infoprint 1352 Laser Printer
Jun 09, 2008 | IBM Infoprint 1120 Laser Printer
Aug 27, 2009 | IBM Infoprint Color 1454 Laser Printer
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: