Question about Samsung HL-R6167W 61" HDTV

1 Answer

For the last couple of months there's a buzzing sound when the TV is powering up. A couple of times I list picture during a show but, I powered down and the picture came back. Now, I don't even get a picture it simply gives me the beeps and then lamp flashes. After a while trying to power up, I get the lamp flashing, along with the standby/temp, and timer.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 5,138 Answers

You could have 2 things Color Wheel and Lamp needs to be replaced Color wheel is what Making buzzing sound,
Go to Encompass Parts Distribution 1-800-638-3328
Type in your Model # they will have list of Parts/Supplies

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello. I have a Polaroid tv that I bought on 2009. When I turn it on, there is s slight buzzing sound. After about 5 seconds the picture goes out and the screen is black, but I can still hear the audio of...


Please unplug the TV from the power.

Wht has happened is there are two parts in the TV that take the AC power from the wall plug, and convert that AC or Alternating (polarity) Current of electricity and convert it to a Directional (one Way) current inside the device called a power supply or PSU.

There are three major components to the TV, the TV Receiver portion where the radio signals are decoded, the Audio Section where the sound is amplified to a speaker, and a VIDEO section where the picture is generated from the radio information sent by the AERIAL or Co-AX cable hookup (or HDMI for Direct input).

Either way, there is no VIDEO where the picture is decoded and displayed on the screen.

You need to check the Connector Cable if it is a HDMI TV source you are watching , or it is the VIDEO section of the TV that has failed.

Usually the decoder are very robust, but the POWER CAPACITORS are what fail and no longer filter the Recified power from the power cord.

For this reason you heard the HUM, as the filters stopped doing what they were supposed to do.

Do NOT OPERATE The set any further as that will cause more damage. Get it to someplace that will fix tvs.

Sep 06, 2017 | Polaroid Televison & Video

1 Answer

LG 50PZ750-UG Intermittent picture and sound.


It is likely the best thing to do here money wise is replace the TV.

Aug 25, 2016 | LG Televison & Video

1 Answer

After a couple months or so of taking 15-20 minutes for the picture/sound to show up the set just died one day during viewing time and now won't turn on at all and nothing is blinking.


Ur power supply board is dead.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.Will solved the power problems.

Apr 21, 2010 | Toymax Magnavox 37MF331D 37 in. LCD TV

1 Answer

TV made a buzzing noise then turned off. Now power light flashes


You have a very Technical problem with this TV. you may have 2 big problems, ballast and dmd. but it could be something else. If you decide to repair it, honestly you will spend more than 300dlls on it, if you like to, go to fixyourdlp.com

Sep 03, 2009 | Samsung Televison & Video

1 Answer

NO PICTURE, NO SOUND On My Plasma TV.


Should have been 3300 UF 10V caps that were bad? Shouls have been replaced with 3300UF 18V. 50V is huge. If it was replaced with a 50 the polarity may be wrong or the cap it too big to be seated property. Sometimes the caps just dry out and even a normal looking one will be the culprit of no OSD. Are you getting an LED fault code blinking? That should be a red led. Do you hear the relay clicking.? When you replaced the caps did you charge them? Just plugging in the set without trying to power it on for about 20-30 mins. I may be able to help you

gysgt2u1@yahoo

Mar 05, 2009 | Philips 50MF231D 50 in. Plasma Television

1 Answer

Sony TV goes to standby - constant red light


The Power Supply has gone. It needs replacing.

Jan 04, 2009 | Televison & Video

1 Answer

Quasar 1989 tv makes a buzzing motor sound


Hi and welcome to FixYa,

Initially, if you have confirmed that the source of the buzzing sound is from inside the TV, then that would indicate a component about to fail or would need attention. Let us try process of elimination:
  • tuner - most unlikely, the tuner is responsible for selecting the channel. No component/part of the tuner could make such a mechanical buzzing sound;
  • speaker(s) - most unlikely, the speaker could have a buzz but generally would not affect the video nor cause snow (weak TV signals);
  • transformer - a strong possibility although without knowing the exact model, at most generic ideas; power transformer, flyback transformer, horizontal drive transformer (unlikely);
  • arcing - another strong possibility. This could be caused by damp, dusty surroundings of the components especially at the FBT area. Another area that could have adverse effect when dusty/damp would be the anode cap.
This of course would require a fair familiarity of electronic components/circuitry and safety procedures, use of a DVM and a soldering iron. It would be to your added advantage access to a service manual or at the very least a schematic diagram with voltage readings. Should you be uncomfortable performing a DIY (do-it-yourself), perhaps your best bet would then be to seek the services of a qualified professional.

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Nov 26, 2008 | Televison & Video

1 Answer

Power but no sound or picture alot of the time


the fault you are describing sounds like what we in the trade call dry joints, basically where components are soldered into the circuit boards in manufacturing, the joints become brittle and crack thus forming a poor connection which can vary with heat. well worth repair may need a couple of electrolytics aswell but i could do the job myself safely for under £100.

Jan 18, 2007 | Hitachi 60CX29B TV

1 Answer

No sound or Picture, Just a hissing sound.


well what sounds like happened is you blew up the tube in it. have you unplugged it from the wall and just let it sit some times that helps because what will happen is there will be a Electrical build up and it won't work right. an other thing you might want to do is hit the Degauss button on the remote. plug some sort of video signal into it and go through the inputs to see if that helps, mine did that every thing would just be black but i plug in my video camera it would detect it and make sure that the audio cables are plugged in these TV might just be that old that they have to have both audio and video in order to work.

Nov 27, 2006 | NetTV DTV34XF3 34" TV

Not finding what you are looking for?
Samsung HL-R6167W 61" HDTV Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...