Question about Sony KP-46WT500 46" Rear Projection HDTV-Ready Television

1 Answer

3D image, ghost image, with shadows. how can I fix it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 3,459 Answers

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.


You can find more details and solutions here on Fixya at the following link below. Or click HERE


3D image, ghost image, with shadows. how can I fix - 3d884ac.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Oct 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There are shadows or ghosts in the picture


This is normally caused by bad grounds in the cabling. Check or replace the cable. Also check your manuals and be sure the cables don't have to be terminated
How to Fix LCD Monitor Ghost images

Aug 14, 2015 | Home Security

1 Answer

Ghosting or a 3D image. A yellow and blue ghosting or shadowing image. Looks much like the top picture in the "picture ghosting image" entry. Is this a convergence problem?


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Aug 09, 2011 | Toshiba 50HX70 50" Rear Projection...

1 Answer

Ghost image in red and alot of red color. This occurs all the time. I have tried magic focus and manuel focus. No change


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?This tv have a dead convergence board.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.Fixing the tv convergence board,will solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 09, 2011 | Hitachi 51F500 51" Rear Projection...

1 Answer

Shadows/ghosting is present on screen at all times


What kind of shadowing are you seeing? Doe the picture look like a 3D movire (colors separated)? What is the make and model?

Please update this with the above info and I'll provide possible solutions.

Thanks,
Dan

Mar 20, 2009 | Televison & Video

2 Answers

Shadowing


GOOD DAY ND GOOD LUCK;

TRY THIS, IT WILL CORRECT CONCERN:

50V500 ONLY
GHOST: May be described as "Out of Convergence" but ghost is still attached to main image.
CONDITION:
A "ghost image" appearing to the left or right of images in the picture. Can be varying shades of a primary color (red, green, or blue) as well as gray. Can easily be seen in the 4 x 3 mode, at the edges of the picture.
CORRECTION:

To correct the problem, please do as follows:
  1. Access I2C Menu. (See page 57 of the Service Manual).
  1. To enter the I2C Service Menu, with power off, (on the front control panel) press and hold the INPUT button. Then press the POWER button for two seconds. The following Service Menu will appear.
03b_ghost_image01.gif Figure 1
  1. BEFORE CONTINUING: CONFIRM THAT THE R, G and B DRIVE ARE SET AT 40.
  • Be sure to press SELECT after each change to SAVE the new Data.


  1. Using the Remote Control joy stick, scroll down to next page (see Figure 2) until LCD ADJUST is highlighted.
03b_ghost_image02.gif Figure 2
  1. Move the joy stick to the right to cursor right once. The next page will appear with the word GHOST highlighted.
  2. Cursor right again, and a white screen will appear with a BLACK SQUARE in the center, as in Figure 3. You will see LCD ADJUST, followed by “SHP” and a number (value).
03b_ghost_image03.gif
Figure 3

  1. If the unit is out of adjustment, you will see a gray ghost on either side of the black square. Move the joystick to the right or to the left until the ghost disappears. The number values will change up or down.
    • If the ghost adjustment is off with a lower value, there will be a ghost to the left of the square.
    • If the ghost adjustment is off with a higher value, there will be a ghost to the right of the square.
  2. Once you get the square to look good without ghosts, press "SELECT" to save any data values that have been changed.
  3. Press the "EXIT" button three times to return to normal picture.
  4. Adjustment is completed
  5. I HOPE THIS WAS HELPFUL, big IRISH.




Jul 26, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Hit 53UWX10BA


convergance ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 14, 2007 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Ghosts or shadows around images


I always start my Hitachi research at their website.........
www.HitachiServiceUSA.com...................T.

Nov 28, 2007 | Hitachi 50V500 50 in. HD-Ready LCD...

3 Answers

Blue shadow or ghosting on screen


  1. First try Magic Focus
  2. if this will not fix problem
  3. then you have a convergence problem
  4. You will need the Converg. Kit
  5. X480295 part number

Nov 12, 2007 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Blue image shadow on one side of the screen..Help!


Perfect! That is typically called "Ghosting" where there is a faint image shadow behind the image on your screen. I'm glad you were able to get it fixed!

Jul 23, 2007 | Mitsubishi WS-65809 65" Rear Projection...

Not finding what you are looking for?
Sony KP-46WT500 46" Rear Projection HDTV-Ready Television Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74211 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...