Question about Arris Touchstone 450a (CM450) Modem

2 Answers

I recently switched from DSL to Cable, My provider set me up with a Arris TM722 and i previously had a Linksys Wireless router. My installer set up my router and i noticed that all the lights where Green, After he left i decided to hook up my Wireless router, I followed all the instructions including turning both off, reseting the Router and plugging everything back in accordingly. Regardless of how many times ive done this my "Link" light blinks orange, Ive noticed No difference in speed or connectivity but im curious to whether there is a problem.\r\n thanks, Steven

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same issue. Anyone out there in internet land know what this means? Thank you very much...

Posted on Oct 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Depending on the type of router and security settings you may want to fully reset everything. You may also want to upgrade the router. If you have Comcast got to comcast.com/wirelessrouter and order a new N gigabit router. You may also want to go into your wireless settings and renew your DHCP. These are all things a tech will do on a service call, but you can save time and try yourself first.

Posted on Nov 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We recently got an Arris TM722 modem and a netgear wireless-N 150 router WNR 1000 after getting a new ISP. My problem is that every time I turn on my xbox to connect to xbox live, my xbox doesn't connect...


Recheck your settings on the xbox.

If using wifi on the xbox, you'll have to setup a new connection to the new router.

If the xbox is wired via cable to the router, you may need to add a router password or other settings .

Jun 21, 2017 | Computers & Internet

1 Answer

Router will not work wireless after switch from DSL to cable


You can go to 192.168.1.1
Enter the default username(leave it blank) and password(admin) and enter the router page

Under setup--> basic setup you can configure your ISP settings
Under wireless you can configure wireless username password etc

If still unable to connect wireless mention the operating system

Jan 29, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

Computer repair tech said Linskey wireless caused internet prob


If you are using DSL as your internet connection there is a timeout period that could be setup in the linksys.

In order to change this you need to log into your router and on check on the setup page. You see the timeout option.

Check with your linksys manual for detailed instructions for logging into the unit. If you dont have it, you can always get it from their website.

Jul 31, 2009 | Linksys Wireless-G Broadband Router

1 Answer

I have a Bell DSL modem Speed Streem 6520,linksys Wrt160n &16port


How to Set up the Bell DSL modem: http://www.digitalhome.ca/forum/showthread.php?t=97732

Setting up a Linksys WRT160N Wireless Router: http://www.linksysbycisco.com/US/en/support/WRT160N
(Download the Manual from this site)

Setting up a Linksys 16 port switch: There are many different switch models, however if it just your basic switch, you should be able to just plug it in and plug in your computers via RJ45 cables.

If you need any further assistance let me know....

Serge

Apr 09, 2009 | Linksys WRT160N Wireless Router

2 Answers

Lost connectivity to network printer when switched to ATT u-Verse


Is the printer connected via wireless? When I recently connected up a new wireless printer to my UVerse network, the printer manual said that establishing the first connection works better via an Ethernet cable directly to the Uverse router. After the printer is set up once, then I could remove the ethernet cable and connect to the printer via wireless from all my computers.
For all wireless PCs that were previously connected via wireless to dsl, you need to create a new network connection for each one, then enter the key that is listed on the side of your Uverse router when prompted. Sometimes it takes a few minutes to establish the connection.
I am amazed that ATT was so unhelpful on these issues. I was one of their first Uverse customers in Texas, and several times over the last years, techs would visit my house to solve a problem or hook something up, explaining to me as he went. That their helpful attitude is deteriorating is a real shame.

Mar 11, 2009 | Computers & Internet

1 Answer

Linksys WRT54G wireless router not compatible with Aztech modem?


Darvin, gotta love your ISP. Never fear......

if it isn't too much of a problem (knowing you have wireless setup done already), then do a factory reset on your router ** remember to copy the WEP Key if you have, or recall the PASS PHRASE so you won't have to reset all wireless devices ** Reset is located on back, you need a ball point pen to reach the reset switch.

Reset process: unplug, take ballpoint pen & insert into reset switch & plug unit back in. Sometimes tricky, but you should notice green light goes to yellow/orange upon resetting.

RESET or NOT - you want the Linksys set for ::

Connection Type - AUTOMATIC (for automatic discovery)
Router IP Address - 192.168.2.1

DCHP - ON, Addresses - 192.168.2.100 and allow 5-50 users
(for security, assign the number of DESKTOP + WIRELESS expected users +1, this way you don't get overrun without knowlege)

Take the cable from Aztech ETHERNET OUT to WAN on Linksys. (usually BLUE) (??) not 100% sure as I have the little silver pocket edition of the same Router. - power cycle (turn both DSL modem & Linksys off for 20 seconds. turn on DSL Modem, wait till it's about as ready as possible, turn on Linksys, should only take 20-30 seconds to power up & recognize.

VERIFY SETTINGS: access router - 192.168.2.1, goto STATUS. you should see IP Addressing, SubNet, DNS1 & DNS2 settings. If you do not, then you have no internet connection.

ALTERNATIVE,

Setup Linksys Router with COnnection Type: PPoE, you will need your ISP assigned ID & Password. Follow all other instructions properly.

If you still have problems, please contact me at 906-495-1707 or via Yahoo IM junodr@yahoo.com or through this website.
once

Jan 04, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys wireless G router not working when connected to dsl modem


hey there, can u acces the gateway of the router

192.168.1.1 than enter ur login & password

than reset the router to fabric setting when done go back in the router and configure it as u like to have it

Jan 04, 2009 | Siemens SpeedStream Modem (4100) (SS4100)

3 Answers

Switched to cable(arris modem) can't set up network


cable dsl same thing. Did you switch providers and get new modem from them? If so. Just delete previous netowrk and install new one let pc discover new one. Also, with your router you got a disc. It should install correctly. Perhaps it is previous network that is hindering you.

Dec 29, 2008 | Arris Touchstone 450a (CM450) Modem

1 Answer

I have a linksys wireless-g broadband router. A couple of weeks ago I became unable to connect to the internet through this router. I am able to connect to the internet, however, using a direct connection...


Since you did not include your exact model number and type of internet provider I cannot give you more specific instructions. Although you can refer to the links below on how to set it up. If you require further assistance just reply to this and give me the model number of your ISP and the model of your router. Also answer this question " When you plug your computer to your modem do you get online automatically or do you need a username and password"

DSL

Cable

Dec 27, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Wireless networking


If your router is a BEFSR41 it does not have a wireless option on it. It is just a wired cable/dsl router.

May 08, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

Not finding what you are looking for?
Arris Touchstone 450a (CM450) Modem Logo

1,347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arris Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Jerry
Jerry

Level 2 Expert

185 Answers

Suddenlink Help

Level 1 Expert

44 Answers

Are you an Arris Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...