Question about Kenwood KAC9105D Car Amp

2 Answers

My KAC9105D wont turn on? i had this amp stolen from me a week ago, purchased a new one and hooked it back up to the same wires that had been running the old one the exact same way, and it just lies there lifeless..im at a loss as to what could be the problem

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Check your fuse on your power wire, should be under the hood by the battery. if the fuse is good then check to make sure you have a good ground and power on the remote turn on wire. it sounds like a blown fuse though, hope this helps. dave

Posted on Oct 05, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Check for blown fuse under hood, trace your remote wire, inspect it for stretched, split or broken leads since this is the thinnest wire, it breaks when pulled too hard.

Posted on Oct 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont power on


Sounds to me like a pin in the wiring harness (hook-up) is bent and not making full contact.

Nov 23, 2013 | Pioneer Avic-Z130Bt 7 In-Dash Navigation...

1 Answer

Kenwood kac-9105D amp


Tipical for that amp.Did you buy it used?

Oct 27, 2012 | Kenwood KAC9105D Car Amp

1 Answer

Hi there i have just purchased two newer model type r alpine subs and a week ago i got a great deal on a rockford fosgate 800 a2 amplifier. The amp has two outputs and don't know exactly what ohms are at...


if you bridge it i believe you run at 4 ohms instead of 8 even if the subs are wired together i would not bridge it for fear of blowing the subs. if you where to bridge it it would be the left channel on one terminal and the right on the opposite terminal. but i highly advise against bridging it as they are wired together. its running at the proper impedence NOT bridged.

Mar 14, 2011 | Car Audio & Video

1 Answer

I have a Kenwood KAC-9105D amp. It is brand new and worked for about 20 minutes while I was driving and it hasn't worked since. When I turn my car on, the blue and red LEDs on the amp both come on for a...


First of all, how are your subs wired to the amp. Make sure your amp is not bridged or you'll fry it, it only has one channel. If that doesn't work you probably already fried your amp.

Oct 09, 2010 | Kenwood KAC9105D Car Amp

1 Answer

When i hook up my amp my speakers wont play music? ive hooked up my rca cables up but i ont know if you hook it up to the input or output frum the cd player?


you rca hookup, back of cd player is rca out, at the amp it is rca in, make shure you hook up blue remote wire, also make shure you have a good ground if not amp will not turn on. if you run wires make shure you run power wire down one side of car and remote and rca down the other, This will keep all motor noise out of system.

Oct 07, 2010 | Audiofonics Car Audio & Video

1 Answer

Is the p.con the spot where i should hook up the remote wire on a kac9105d kenwood amp?


Yes it is. it runs to the blue and white striped wire coming off the head uni.

Oct 03, 2010 | Kenwood KAC9105D Car Amp

1 Answer

No amp sound output


it might be ur ground check the gound wire

Jul 06, 2010 | Kenwood KAC9105D Car Amp

2 Answers

Fried 3 amps. Is it my car? 93 mustang gt. I had my original amp Rockford Fosgate punch 500@2 for about 8 years then the whole system got stolen. Bought the same one on Ebay and it was fine for a few...


make sure you run your ground and power wires on one side of the car and the rca's on the other, keep them sepparate. if you have all wires running to your amp(rca's/12v power/remote), then you run the chance of either getting interference from the alternator, or if you have a pinched wire(usually by the door step) it may short with your battery wire. Double check your rca's and make sure they're ok and also check for corrosion on your wires.

Jul 05, 2010 | Rockford Fosgate Punch 500a2 Car Audio...

1 Answer

Stereo wont stay on and only couple speakers work


on the back of the stereo you should have an rca inputs in the back, it should say either rear, subwoofer, or non-fade. all of these are acceptable, run rca's to the amp from the deck.
also on the deck in the wire harness is a blue wire with a white stripe.
hook a wire up to this and run it to the REM. terminal of your amp. this wire tells the amp to turn on when you turn on your key.
these are the only two wires you hook up the back of the stereo.
hope this helps

Jan 07, 2010 | Sony Car Audio & Video

Not finding what you are looking for?
Kenwood KAC9105D Car Amp Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4848 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...