Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer/top load

I have a Kenmore Washer (60) series Model#92561200 that is 13 yrs old. Inside the washer smells. I have washed and left baking soda inside but nothing helps - I can smell it when I walk by the cover is closed. Please let me know what I can do to get rid of smell. Thank you

Posted by on

  • dionamos Jan 12, 2009

    Kenmore Washer 60 series: Clothes come out full of lint, what can I do?

  • Anonymous Mar 12, 2014

    can't open top to get inside of Kenmore washer model 110.24872300

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 172 Answers

Try Washer Magic, you can buy it at your local Menards, Ace Hardware or look at line. I have never used it.

Let me know how it works for you.

Posted on May 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a filter in my Kenmore 90 series top loading washer? Washer smells a bit "off". It is old but I would rather not have to replace it right now.


NO THER IS NO FILTER BUT OU HAVE TO MAKE SURE THAT YOU ARE USING HE SOAP AND LEAVE THE DOOR OPEN AFTER YOU DO A WASH LOAD

Dec 22, 2010 | Kenmore Washing Machines

1 Answer

How do I lift the top of a kemore 90 series washer


you don,t.unless its over 20 yrs old.the whole cabinet comes off.console folds up and away then 2 clips hold the cabinet to the frame

Jan 15, 2010 | Kenmore 24902 Top Load Washer

1 Answer

Kenmore 70 series top loader washer machine smells like its burni


you had the clutch coupling replaced sometimes i have noticed that the smell will last a few loads but no more than that

Apr 22, 2009 | Washing Machines

2 Answers

How do to you take the top off to get inside the washer


you have to go in through the back. Patients is required for back removal since some components are attached to it. once the back is removed the top is held on to the cabinet by screws toward front take them out and top should lift up.

Apr 03, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

My Kenmore series 70, top loading, washer has a mold smell.


thaty have this one stuff called affresh its used for frontloaders but you can use it for toploaders too it works great

Mar 24, 2009 | Kenmore 22422 Top Load Washer

1 Answer

No power to washer


Hi!!! say check your lid switch make sure its good..

Jan 01, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore elite front loading wash & dryer-5 yrs old: should i buy?


all kenmore named washer will have 110 as first 3 digits of model #..the he washers are usually good washers..like all front loads they have their quirks ..if you read reviews from other consumers they indicate problems ..most of which are easily remedied by reading owners manuals..mold /mildew usually a bleach clean every few months ..vibration need real solid floor..oversuds use HE detergents only..just a matter of changing mind set from top loads with 25 gals of water each fill to a front load with 5-6 gals each fill..top load with 750-850 rpm spin speed to front load 1000-1200 rpm ..if willing to learn proper use and what to expect they can best investment..just don't let opinions of those unwilling to adapt affect your decision

Dec 16, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Smelly wash tub, in washer.


Model nums are fine in the store, if it is an oasis or calypso make sure drain hose is not in drain more than 5 inches. If not your pump might be going out or is clogged. A great cleaner developed is called washer magic and it will help the smell with some elbow grease. If not and is a traditional top load check motor and gearcase or even the timer for wear in a old machine.

Aug 23, 2008 | Kenmore 22422 Top Load Washer

3 Answers

Kenmore 70 series


I am assuming there is no noise coming from the machine, if not check the lid switch. open the lid and look for a small slot in the top of the washer. With the washer set to run, press down on the slot with a screwdriver or something (make sure everything is clear from the tub) see if there is a clicking sound when you push down. If the machine starts you need a depressor piece on the door. if there is no clicking sound you may need something else. lets start with the simplest, like the door switch and go from there.

Nov 02, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...