Question about Televison & Video

2 Answers

My matsui m32lw508 will not switch on just flickers then the standby light comes on.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi my matsui tv wont turn on the blue light keeps flickering and there is a beeping sound at the same time can you help please

Posted on Jan 20, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,099 Answers

Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Take care .......

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 42 in matsui tv wont come on at stand by you have to keep on turning it no for a bout 10 minits or moor


Sounds like main board fault. Power ON signal should come from the main board to power regulator board, to switch in ON from standby to power ON. Contact any service technician. The troubleshooting to this kind of fault is a skilled work. Not user repairable.
Gopakumar Gopalan Google

Apr 22, 2014 | Sony KV-32XBR85 TV

1 Answer

Hi! My digital box - Matsui DTR-2 has stopped turning on from standby. The red standby light is on, but when I press the on/off button on the remote, the function light only flickers and the standby light...


Hi,

Initially and assuming there was a momentary power interruption, this it is possible that the system has just a glitch and all it needs is a reset. Unplug from the mains for an hours or so to dissipate any residual power and thereafter try again.

Should this be not corrective, then it is possible that the unit has sustained a hardware fault and therefore would require opening up. Further, it needs familiarity with electronic components and circuitry, use of a DVM and a soldering iron as well as access to a service manual or at the very least a schematic diagram with voltage readings. Should you be uncomfortable doing a DIY, then perhaps your best bet would be to call it in for service.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 06, 2008 | Televison & Video

1 Answer

Matsui tv stuck in standby


Look what category you are in.

Mar 15, 2014 | Sony MDS-JE330 Mini Disc Player

2 Answers

Tv on standby wont turn on either by remote or buttons on tv


Its not the remote but the set itself, Have it looked at and get an estimate for repair

Dec 05, 2012 | LG MKJ32022813 Remote Control

1 Answer

My matsui lcd keeps switching itself off and going into standby, when I turn it back on by the remote the standby light goes pale


sounds like a PSU power supply problem could be also one of your LCD lamps are going bad.

Get it checked, if you know what your doing then open it up, and look for bulging caps, or burnt area on the curcuit board.

Good luck

Apr 14, 2011 | Televison & Video

1 Answer

Matsui Radio Alarm CDCR200 set the clock time, lost instructions


Hold CLOCK SET button down, press HOURS and MINUTES until you get the right time, release CLOCK SET button. This radio alarm unhelpful calls the ON/OFF button "STANDBY"! To turn it on, press the STANDBY button so the standby light is on!

Feb 21, 2010 | Audio Players & Recorders

1 Answer

Samsung 55" flat panel lcd tv is not coming on the standby button light stayes on but no picture coming on it doesn't come on with the switch only by plugin it to the outlet.


Does the backlight come on? or even flash on and off when the TV is switched on? I presume the standby light is showing 'blue' then. Do you have any sound? Also, when the TV remote is pressed, does the standby light flicker?

Feb 22, 2010 | Samsung LE40R74BDX 40 in. LCD Television

1 Answer

TV just turned off while watching. standby light flickering red 7


Ur power board have dead capacitors.U Know how to solders?Take the tv aparts,check these capacitors in the power board for dead capcitors like puff up or burst open.Replaced these capacitors to get power back.Or buy and replaced the whole reburbish power board at Shopjimmy.com,Ebay.com.








Jan 21, 2010 | Televison & Video

1 Answer

When switching the tv on onlypower/standby red light comes on not


How many blinks when its red ?
The blinking is a code from the microprocessor telling why it's not turning on.

Apr 12, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...