Question about Nikon FM10 35mm SLR Camera

Open Question

How do I unload the film? - Nikon FM10 35mm SLR Camera

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i load or unload film?


Digital cameras don't have film.

Jul 06, 2011 | Cameras

1 Answer

I don't know how to load or unload the film for my Minolta x700


You can download the manual from
http://butkus.org/chinon/minolta/minolta_x-700/minolta_x-700.htm

There are illustrated instructions for loading/unloading film beginning on page 17.

Feb 22, 2011 | Minolta X-700 35mm SLR Camera

1 Answer

I have a NikonN70, how do i unload the film?


Slide the camera back lock release down, open the back, and pull out the film cartridge. Full instructions are in the manual. "LOADING FILM" is on page 16, "REWINDING FILM" is on page 24, and page 25 shows how to remove the film.

If you need a manual, you can download one from
http://butkus.org/chinon/nikon/nikon_n70/nikon_n70.htm

Oct 05, 2010 | Nikon N70 35mm SLR Camera

1 Answer

My lomo fish eye camera won't keep the film in or reel it back


I have had the same problem with unloading film, i had to take the whole camera in to the shop to have them open it in a darkroom and develop the film. Seems will have to do that from now on but at least got film back.

Feb 23, 2010 | Lomo Fisheye 35mm Film Camera

1 Answer

I do not know how to load or unload the 35 mm film.


The cartridge will only go in one way. install and pull film to marked line (should have a few notches in the film strip past gear) close camera and either wind until it stops or if batt powered it will load itself then ready to roll

May 23, 2009 | Photography

1 Answer

Loading/ Unloading the Film


anniehongx,

open the film door and charge the shutter. are the drive and take up sprockets turning? if they are then the film was not loaded properly. be sure to push enough film leader into the take up spool bars.
if the spools are not turning then a gear or spring ( advance lever return lock ) is broken.
there are no new parts for the ME Super however some camera repair shops have good used parts that can be used. get an estimate first.

Mar 02, 2009 | Pentax ME Super 35mm SLR Camera

1 Answer

Can't close door after loading film.


sounds like the door latch broke. (tape) Canon will only replace/upgrade not repair.
ours cracked after a drop then broke replacing the film.

Jan 07, 2009 | Canon Sure Shot Z155 Caption 35mm Point...

1 Answer

Unloading my medium format camera


If i remember correctly there should be a button on the bottom of the camera opposite side of the film winder if you press that button it will release the tension on the film and allow you to reel the film back into the film canistor.BE CAREFUL when reeling it back in because you can reel the whole roll back into the film canistor, when you think your getting towards the end go SLOW you will feal the reel loosen up alot.that means that the film has let go of the other side STOP and you can open the case without exposong your film.GOOD LUCK if this helps rate me or leave some more info.Thanks.

Nov 18, 2007 | Photography

1 Answer

Leica m6 film stuck, I think


Did you mean you wanted to unload the unfinished film?
What you did then? be more clear and specific about the procedures before I can give you suggestions.

pc-cook

Oct 22, 2007 | Leica M6 TTL .58 35mm Rangefinder Camera

Not finding what you are looking for?
Nikon FM10 35mm SLR Camera Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Photography Experts

kakima

Level 3 Expert

102366 Answers

Ric Donato

Level 2 Expert

225 Answers

Bart Pulverman

Level 2 Expert

362 Answers

Are you a Nikon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...